55.100 瓶、小罐、瓮 标准查询与下载

NF H35-027:2015 制瓶工业.葡萄酒瓶口

Bottling industry - Port wine finish

EN ISO 12818:2015 玻璃包装.玻璃瓶标准公差(ISO 12818:2013)

Diese Internationale Norm legt die Grenzabweichungen fur Flaschen fest, die fur die Verwendung mit pharmazeutischen Produkten, Kosmetik- und Parfumerieprodukten und chemischen Produkten vorgesehen sind. Behandelt werden folgende Grenzabweichungen: Grenzabweichungen des Randvollvolumens; Grenzabweichungen der Hohe; Grenzabweichungen des Durchmessers und der Breite; Achsabweichungen. Die folgenden Flaschentypen sind von dieser Internationalen Norm ausgenommen: "Miniaturflaschen"; kleine Flaschen fur Extrakte, Essenzen usw.; kleine Glaser (z. B. fur Einzelportionen Marmelade).

Glass packaging - Standard tolerances for flaconnage

EN ISO 12821:2015 玻璃包装.26H180冠形盖瓶口.尺寸规格(ISO 12821:2013)

Diese Internationale Norm legt die Mase des 26 mm hohen Kronenmundstuckes fur Getrankeflaschen aus Glas fest. Das hohe Kronenmundstuck ist fur die Verwendung eines Kronenverschlusses aus Metall ausgelegt (siehe CE.T.I.E. Dokumentationsblatt EC 01-02 Revision 1).

Glass packaging - 26 H 180 crown finish - Dimensions

DIN EN 16593:2015 包装. 硬质塑料容器. BVS 30H60聚酯涂层; 德文版本EN 16593-2014

Packaging - Rigid plastic containers - PET finish BVS 30H60; German version EN 16593:2014

DIN EN 16594:2015 包装. 硬质塑料容器. 26/22 (12,0) 聚酯涂层; 德文版本EN 16594-2014

Packaging - Rigid plastic containers - PET finish 26/22 (12,0); German version EN 16594:2014

DIN EN 16592:2015 包装. 硬质塑料容器. 29/25 (12,6) 聚酯涂层; 德文版本EN 16592-2014

Packaging - Rigid plastic containers - PET finish 29/25 (12,6); German version EN 16592:2014

KS G 9103-2014 橡胶瓶塞

Rubber bottle stopper

GSO ISO 9727-6:2014 圆柱形软木密封件物理试验 第6部分：液体密封性的测定

This part of ISO 9727 specifies a test method for determining the liquid tightness of a cylindrical cork stopper. It is applicable to all types of cylindrical cork stoppers ready for use, intended to be completely inserted in the bottle neck (straight cork stoppers).

Cylindrical cork stoppers -- Physical tests -- Part 6: Determination of liquid tightness

GSO ISO 9727-7:2014 圆柱形软木塞物理试验 第7部分：粉尘含量的测定

This part of ISO 9727 specifies a test method for determining the dust content of a cylindrical cork stopper. It is applicable to all types of cylindrical cork stoppers ready for use, intended to be completely inserted in the bottle neck (straight cork stoppers).

Cylindrical cork stoppers -- Physical tests -- Part 7: Determination of dust content

GSO ISO 9727-1:2014 圆柱形软木塞 物理测试 第1部分：尺寸测定

This part of ISO 9727 specifies a test method for determining the dimensions of cylindrical cork stoppers, namely diameter, length and, in some cases, ovalisation. It is applicable to all types of cylindrical cork stoppers as defined in ISO 633, ready for use or semi-worked.

Cylindrical cork stoppers -- Physical tests -- Part 1: Determination of dimensions

GSO ISO 9727-5:2014 圆柱形软木塞物理试验 第5部分：拔出力的测定

This part of ISO 9727 specifies a test method for determining the maximum force necessary to extract a cylindrical cork stopper. It is applicable to all types of cylindrical cork stoppers ready for use, intended to be completely inserted in the bottle neck (straight cork stoppers).

Cylindrical cork stoppers -- Physical tests -- Part 5: Determination of extraction force

GSO ISO 9727-4:2014 圆柱形软木塞 物理测试 第4部分：尺寸测定和压缩后恢复

This part of ISO 9727 specifies a test method for determining the percentage of diameter recovery of cylindrical cork stoppers, after compression. It is applicable to all types of cylindrical cork stoppers ready for use or semi-worked, intended to be completely inserted in the bottle neck (straight cork stoppers(

Cylindrical cork stoppers -- Physical tests -- Part 4: Determination of dimensional recovery after compression

GSO ISO 9727-3:2014 圆柱形软木塞物理试验 第3部分：水分含量的测定

This part of ISO 9727 specifies a test method for determining the humidity content of cylindrical cork stoppers, ready for use or semi-worked.

Cylindrical cork stoppers -- Physical tests -- Part 3: Determination of humidity content

GSO ISO 9727-2:2014 圆柱形软木塞物理试验 第2部分：聚结软木塞质量和堆积密度的测定

This part of ISO 9727 specifies a test method for — measuring the mass of cylindrical cork stoppers ready for use or semi-worked, totally or partially made of agglomerated cork, and — calculating the apparent density of cylindrical cork stoppers ready for use or semi-worked, totally made of agglomerated cork.

Cylindrical cork stoppers -- Physical tests -- Part 2: Determination of mass and apparent density for agglomerated cork stoppers

BS EN 16592:2014 包装. 硬质塑料容器. 29/25 (12,6) 聚酯涂层

Packaging. Rigid plastic containers. PET finish 29/25 (12,6)

BS EN 16594:2014 包装. 硬质塑料容器. 26/22 (12,0) 聚酯涂层

Packaging. Rigid plastic containers. PET finish 26/22 (12,0)

BS EN 16593:2014 包装. 硬质塑料容器. BVS 30H60聚酯涂层

Packaging. Rigid plastic containers. PET finish BVS 30H60

EN 16592:2014 包装.硬质塑料容器.聚对苯二甲酸乙二醇酯完成29/25(12,6)

This European Standard specifies the design and dimensions of the 29 mm screw finish with three (3) thread starts for flat waters and non-carbonated beverages. This finish is designated PET finish 29/25 (12,6). This finish can be used for aseptic filling and filling with nitrogen charge (internal overpressure inferior to 1 bar max). The dimension (12,6) is the height in millimetres from the top of finish to the bottom of the support ledge. This finish is designed to accept a tamper evident plastic closure only. During first opening, the tamper evident band will separate from the closure shell and remain on a one way bottle neck or like bottles in the returnable market, the tamper evident band will tear but will remain connected to the closure shell.

Packaging - Rigid plastic containers - PET finish 29/25 (12@6)

EN 16594:2014 包装.硬质塑料容器.聚对苯二甲酸乙二醇酯完成26/22 (12,0)

This European Standard specifies the design and dimensions of the 26 mm screw finish with three thread starts for flat waters and non-carbonated beverages. This finish can be used for aseptic filling and filling with nitrogen charge (internal overpressure inferior to 1 bar max). The dimension (12,0) is the height in millimetres from the top of finish to the bottom of the support ledge. This finish is designed to accept a tamper evident plastic closure only. During first opening, the tamper evident band will separate from the closure shell and remain on a one way bottle neck or like bottles in the returnable market the tamper evident band will tear but will remain connected to the closure shell.

Packaging - Rigid plastic containers - PET finish 26/22 (12@0)

EN 16593:2014 包装.硬质塑料容器.聚对苯二甲酸乙二醇酯完成BVS 30H60

This European Standard specifies the design and dimensions of the screw PET finish BVS 30H60 for the closure of wines with CO2 content below 1,2 grams per litre. This finish is designed to take an aluminium tamper-evident closure with extended skirt which is reformed during application or a screw plastic closure (with or without metallic shell).

Packaging - Rigid plastic containers - PET finish BVS 30H60