59.100.10 纺织玻璃纤维材料 标准查询与下载
共找到 573 条与 纺织玻璃纤维材料 相关的标准，共 39 页
This International Standard specifies a method for determining the twist balance index of folded yarn and cabled yarn made from textile glass, carbon, aramid or any other reinforcement fibre.
Reinforcement yarns - Determination of twist balance index
- ICS
- 59.100.10
- CCS
- W59
- 发布
- 2010-12-15
- 实施
- 2010-12-15
Textile glass — Woven fabrics — Determination of thickness AMENDMENT 1
Textile glass - Woven fabrics - Determination of thickness; Amendment 1
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010-12-15
- 实施
- 2010-12-15
This International Standard specifies a method of determining the time taken for a tensile load to break the bond between the strands of a textile glass chopped-strand mat, used for the reinforcement of plastics, which is immersed in styrene.
Textile glass chopped-strand mats for reinforcement of plastics - Determination of time of dissolution of the binder in styrene
- ICS
- 59.100.10
- CCS
- Q23
- 发布
- 2010-10
- 实施
이 표준은 플라스틱의 강화에 사용하는 유리 로빙(이하 로빙이라 한다.)에 대하여 규정한다.
Glass roving
- ICS
- 59.100.10
- CCS
- Q37
- 发布
- 2010-07-27
- 实施
- 2010-07-27
Textile glass - Determination of stiffness of rovings
- ICS
- 59.100.10
- CCS
- W50
- 发布
- 2010-01-31
- 实施
- 2010-01-31
1 Scope This International Standard specifies a method for the determination of the stiffness of textile glass rovings.
Textile glass. Determination of stiffness of rovings
- ICS
- 59.100.10
- CCS
- 发布
- 2010-01-31
- 实施
- 2010-01-31
1.1 This specification primarily covers greige tapes and webbings woven from “E” electrical classification glass fiber yarns. This specification can also be applied to tapes and webbings made of other glass fiber grades upon agreement between the purchaser and the supplier. 1.2 This specification is intended to assist ultimate users by designating the types of these products that are typical in the industry. This specification permits the application of organic materials to the glass fiber yarn during manufacture that helps facilitate weaving. When used as permitted in this specification, such materials will not interfere with the intended end use requirements. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Greige Woven Glass Tapes and Webbings
- ICS
- 59.100.10
- CCS
- W59
- 发布
- 2010
- 实施
1.1 This specification covers finished fabrics woven from “E” electrical glass fiber yarns that are intended as a reinforcing material in laminated plastics for structural use. This specification can also be applied to fabrics made of other glass types as agreed upon between the purchaser and the supplier. 1.2 This specification specifies the terminology, definitions, general requirements, and physical requirements for finished woven glass fabrics This specification permits the application of sizing materials to the glass fiber yarn during manufacture that helps facilitate weaving. These organic materials are typically removed from the greige fabric and replaced with a finish that is compatible with the resin matrix specified in the contracting document Note 18212;Sizing materials on glass fiber yarns, in most cases, are removed by various cleaning procedures as a first stage in preparing a finished fabric. When these yarn sizing materials are removed during a cleaning procedure they need not be compatible with the subsequent resin matrix. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This specification is one of a series to provide a substitute for Military Specifications: MIL-Y-1140 Yarn, Cord, Sleeving, Cloth, and Tape-Glass; and MIL-C-9084 Cloth, Glass Finished for Resin Laminates. 1.5 Additional ASTM specifications in this series have been drafted and appear in current editions of the Annual Book of ASTM Standards. These include greige glass fabrics, glass tapes, glass sleevings, glass cords, glass sewing threads, and finished laminates made from finished glass fabrics. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Finished Woven Glass Fabrics
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This method covers the determination of the tensile strength and elongation at break of fiber glass mats.
Tensile strength and elongation at break for fiber glass mats
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This test method covers the determination of the moisture sensitivity of fiber glass mat binder systems.
Moisture sensitivity of fiber glass mats
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This method covers the determination of the percent loss on ignition of fiber glass mats. This ignition loss can be considered to be the binder content.
Loss on ignition of fiber glass mats
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This practice defines the test conditions for testing fiber glass mats.
Test conditions for fiberglass mat test methods
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This method covers the determination of the average fiber diameter (or distribution of diameters) of fibers used in nonwoven fiber glass mats.
Average fiber diameter of fiber glass mats
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
The purpose of this standard practice is to list existing TAPPI test methods which provide procedures for sampling and lot acceptance, stiffness, tear resistance, and thickness, and to suggest modifications to these methods for use in the sampling and testing of fiber glass mats.
Testing of fiber glass mats: use of modified TAPPI procedures for sampling and lot acceptance, stiffness, tear resistance, air permeability, and thickness
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This practice covers the location from which samples are taken from a sheet of fiber glass mat used as a sample test unit for physical property determination.
Sample location for fiber glass mat sheets
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This method covers the determination of the moisture content of fiber glass mat.
Moisture content of fiber glass mats
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This method is a description of fiber glass mat attributes that define visual uniformity in the finished mat product.
Fiber glass mat uniformity (visual defects)
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2010
- 实施
This Japanese Industrial Standard specifies the textile glass chopped strands (hereafter referred to as "chops") to be used mainly for the reinforcement of plastics.
Textile glass chopped strands
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2009-12-21
- 实施
Textile glass - Determination of stiffness of rovings
- ICS
- 59.100.10
- CCS
- Q36
- 发布
- 2009-11
- 实施
