59.120.01 纺织机械综合 标准查询与下载

FZ/T 90053-2007 织造准备和整理机器工作宽度

本标准规定了机织和针织准备机器的工作宽度和整理机器公称宽度及其定义。 本标准适用于棉、毛、丝、化学纤维及其混纺机织物和针织物的织造准备和整理机器。

Working widths for weaving and knitting preparatory machines and finishing machines

FZ/T 91006-2007 纺织机械 镀覆和化学处理

本标准规定了纺织机械金属镀覆和化学处理的术语和定义、表示方法和表示符号、需方应向供方提供的资料、镀覆和化学处理的服役条件分类、选用原则、镀覆层厚度等级和适用范围、镀覆和化学处理的 要求、试验方法和验收规则以及包装、运输和贮存等。 本标准适用于纺织机械、纺织专件和器材、纺织电器、纺织仪器仪表的金属或非金属制件的电镀、化学镀、电化学处理和化学处理。

Textile machinery- Coating and chemical treatment

DIN ISO 11659-3:2006 纺织机械与附件.与纺织加工油剂接触的机械零部件.第3部分:对漆膜冲击测定

This part of ISO 11659 specifies tests for determining the impact of processing oils on textile machine parts made with lacquers. In view of the multitude of processing oils and lacquer systems, it addresses a selection of those substances and materials. However, testing of products not mentioned is also possible. It is applicable to textile processing oils used on fibres, yarns and the filaments prepared for their processing, and to lacquer systems applied to machine parts or test plates, including the necessary pre-treatment.

Textile machinery and accessories - Machine parts in contact with textile processing oils - Part 3: Determination of the impact on lacquers (ISO 11659-3:2004) English version of DIN ISO 11659-3:2006-09

DIN ISO 11659-2:2006 纺织机械与附件.与纺织加工油剂接触的机械零部件.第2部分:聚合材料冲击测定

This part of ISO 11659 specifies tests for determining the impact of processing oils on textile machine parts made of polymeric materials. In view of the multitude of processing oils and polymeric materials, it addresses a selection of those substances and materials. However, testing of products not mentioned is also possible. It is applicable to textile processing oils used on fibres, yarns and the filaments prepared for their processing, and to polymeric materials in the thermoplastics, duroplastics, elastomers and thermoplastic elastomers groups.

Textile machinery and accessories - Machine parts in contact with textile processing oils - Part 2: Determination of the impact on polymeric materials (ISO 11659-2:2004) English version of DIN ISO 11659-2:2006-09

NF G46-001-1:2005 纺织机械.安全要求.第1部分:通用要求

Textile machinery - Safety requirements - Part 1 : common requirements.

BS EN ISO 11111-1:2005 纺织机械.安全要求.通用要求

ISO 11111-1:2005 specifies safety requirements for frequently occurring hazards common to the types of textile machinery and the hazards of certain machine elements covered by ISO 11111-2 to ISO 11111-7. It is applicable to machinery plant and related equipment intended to be used in the textile industry for the following: opening, cleaning, blending, carding, preparation subsequent to carding, spinning and other processing of fibres (staple and filament) and other materials to form yarn or nonwoven material (including felts); winding, doubling, twisting, texturing, etc. of yarns and the processing of yarns preparatory to weaving and knitting; weaving, knitting, lace-making and similar utilization of yarn, etc., to form fabric; formation of braid, cord, strand, rope, twine, net, etc., except take-up reels of stranding and laying machinery; processes including pretreatment, bleaching, dyeing, printing and finishing of fibre, yarn, fabric, braid, cord, etc., and final assembly for despatch; piece dyeing of made-up goods; finishing of warp and weft knitting, including hosiery, other than assembly of the finished product (e.g. sewing); carpet manufacture, by weaving, tufting and other processes.

Textile machinery - Safety requirements - Common requirements

ISO 11111-1:2005 纺织机械.安全要求.第1部分:通用要求

This part of ISO 11111 specifies safety requirements for frequently occurring hazards common to the types of textile machinery and the hazards of certain machine elements covered by ISO 11111-2 to ISO 11111-7. It is applicable to machinery plant and related equipment intended to be used in the textile industry for the following: ? the opening, cleaning, blending, carding, preparation subsequent to carding, spinning and other processing of fibres (staple and filament) and other materials to form yarn or nonwoven material (including felts); ? the winding, doubling, twisting, texturing, etc. of yarns and the processing of yarns preparatory to weaving and knitting; ? the weaving, knitting, lace-making and similar utilization of yarn, etc., to form fabric; ? the formation of braid, cord, strand, rope, twine, net, etc., except take-up reels of stranding and laying machinery; ? processes including the pretreatment, bleaching, dyeing, printing and finishing of fibre, yarn, fabric, braid, cord, etc., and final assembly for despatch; ? the piece dyeing of made-up goods; ? finishing of warp and weft knitting, including hosiery, other than assembly of the finished product (e.g. sewing); ? carpet manufacture, by weaving, tufting and other processes. This part of ISO 11111 applies to all machinery, plant and equipment used during the processes listed above, including equipment to enable automated operation of the machines and processes in either free-standing or complex installations, such as pneumatic fibre transportation, but excluding other transportation between the interfaces of the machines. NOTE 1 The standard for a specific textile machine will normally consist of two parts: this part of ISO 11111 and the specific part of ISO 11111 relevant to that machine. However, in the case of nonwoven lines, which is covered by ISO 11111-3, ISO 11111-2, ISO 11111-6, and ISO 11111-7 are also to be taken into account. This ISO 11111 does not deal with specific requirements for pressure containment. NOTE 2 In the EU and EFTA specific Directives for pressure vessels and electromagnetic compatibility among others exist.

Textile machinery - Safety requirements - Part 1: Common requirements

KS B ISO 5232-2004(2009) 纺织机械图形符号

Graphical symbols for textile machinery

ISO 11659-3:2004 纺织机械与附件.与纺织加工油剂接触的机械零部件.第3部分:对漆膜影响的测定

This part of ISO 11659 specifies tests for determining the impact of processing oils on textile machine parts made with lacquers. In view of the multitude of processing oils and lacquer systems, it addresses a selection of those substances and materials. However, testing of products not mentioned is also possible. It is applicable to textile processing oils used on fibres, yarns and the filaments prepared for their processing, and to lacquer systems applied to machine parts or test plates, including the necessary pre-treatment.

Textile machinery and accessories - Machine parts in contact with textile processing oils - Part 3: Determination of the impact on lacquers

ISO 11659-2:2004 纺织机械与附件.与纺织加工油剂接触的机械零部件.第2部分:对聚合材料影响的测定

This part of ISO 11659 specifies tests for determining the impact of processing oils on textile machine parts made of polymeric materials. In view of the multitude of processing oils and polymeric materials, it addresses a selection of those substances and materials. However, testing of products not mentioned is also possible. It is applicable to textile processing oils used on fibres, yarns and the filaments prepared for their processing, and to polymeric materials in the thermoplastics, duroplastics, elastomers and thermoplastic elastomers groups.

Textile machinery and accessories - Machine parts in contact with textile processing oils - Part 2: Determination of the impact on polymeric materials

FZ/T 90052-2004 弹性针布术语和定义

本标准规定了弹性针布的基本术语和定义。 本标准适用于纺织生产中梳理棉、毛、麻等各种纤维的弹性针布，也适用于纺织工业对机织、针织、经编织物等进行起毛整理的弹性针布，其他用途的弹性针布也可参照使用。

Terms and definitions of fillet clothing

FZ/T 90074-2004 纺织机械产品涂装

本标准规定了纺织机械产品涂装的基本色、涂膜质量要求及检验方法。 本标准适用于纺织机械、纺织仪器、仪表等产品的表面涂装。

Painting for the products of textile machinery

FZ/T 93007-2004 纺织机械与附件.圆柱形条筒.技术条件

本标准规定了圆柱形条简的要求、试验方法、检验规则和包装、标志。 本标准适用于棉、毛、麻、绢等纺用圆柱形条简（以下简称“条筒”）。

Textile machinery and accessories-Cylindrical sliver cans-Technology terms

FZ/T 91007-2004 纺织机械产品涂装工艺

本标准规定了纺织机械产品涂装工艺。 本标准适用于纺织机械、纺织仪器、仪表等产品的涂装工艺。

Painting process for the products of textile machinery

FZ/T 93062-2003 针刺法非织造布生产联合机

本标准规定了针刺法非织造布生产联合机(以下简称针刺联合机)的工艺流程、单元机组成、产品分类、技术要求、试验方法、检验规则及标志、包装、运输和贮存等。 本标准适用于以短纤维为原料、用针刺法生产土工布、合成基布、造纸毛毯用的针刺联合机，生产其他种类的短纤维非织造布用的针刺联合机也可参照采用。

Needle punching for nonwoven production unit

FZ/T 93061-2003 非织造布铺网机

本标准规定了非织造布铺网机的产品分类、技术要求、试验方法、检验规则及标志、包装、运输和贮存等。 本标准适用于将梳理后的松散状纤维网均匀连续不断地折叠成具有一定宽度和厚度的纤维网的机械铺叠交叉式铺网机。

Nonwoven lapping machine

FZ/T 93060-2003 非织造布梳理机

本标准规定了非织造布梳理机的产品分类、技术要求、试验方法、检验规则及标志、包装、运输和贮存等。 本标准适用于非织造布生产用的短纤维化纤梳理机。

Nonwoven card

FZ/T 90004-2002 经纱管和纬纱管检验规则

本标准规定了卷绕纱线用经纱管和纬纱管的检验总则、型式检验和出厂检验。 本标准适用于塑料、纸质或木质经纱管和纬纱管的检验。

Inspection rules for warp bobbins and weft bobbins

DIN 53992-3:2002 纺织机械和附件.与工作油接触的机器零件.第3部分:对涂漆影响的测定

Textile machinery and accessories - Machine parts in contact with processing oils - Part 3: Determination of the impact on laquers

FZ/T 92018-2001 平面钢领

本标准规定了平面钢领的产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于环锭细纱机和捻线机的钢领。

Plane ring