65.020.40 绿化和造林 标准查询与下载

GB/T 8822.2-1988 中国林木种子区 衫木种子区

本标准适用于区划范围内造林用的种子（包括实生苗、扦插苗、分蘖苗、组培苗及穗条等其他繁殖材料）。不适用于城镇绿化和试验用的种子。

Seed zones of chinese forest trees--Seed zones of cunning hamia lanceolata (Lamb.) Hook

GB/T 8822.1-1988 中国林木种子区 油松种子区

本标准适用于区划范围内造林用的种子。不适用于城镇绿化和试验用的种子。

See zones of chinese forest trees--Seed zones of pinus tabulaeformis carr

GB/T 8822.13-1988 中国林木种子区 白榆种子区

本标准适用于本区划范围内的造林用的种子。不适用于城镇绿化和试验用的种子。

Seed zones of chinese forest trees--Seed zones of ulmus pumila L.

GB/T 8822.12-1988 中国林木种子区 云衫种子区

本标准适用于本区划范围内造林用的种子。不适用于城镇绿化和试验用的种子。

Seed zones of chinese forest trees--Seed zones of picea asperate mast

GB/T 8822.11-1988 中国林木种子区 侧柏种子区

本标准适用于区划范围内造林用的种子。不适用于城镇绿化和试验用的种子

Seed zones of chinese forest trees--Seed zones of platycladus orientalis (linn)franco

GB/T 8822.10-1988 中国林木种子区 华北落叶松种子区

本标准适用于区划范围内造林用的种子。不适用于城镇绿化和试验用的种子。

Seed zones of chinese forest trees--Seed zones of larix principis-rupprechtii mayr

GB/T 8822.9-1988 中国林木种子区 长白落叶松种子区

本标准适用于区划范围内造林用的种子。不适用于城镇绿化和试验用的种子。

Seed zones of chinese forest trees--Seed zones of larix olgensis henry

GB/T 8822.8-1988 中国林木种子区 兴安落叶松种子区

本标准适用于区划范围内造林用的种子。不适用于城镇绿化和试验用的种子。

Seed zones of chinese forest trees--Seed zones of larix gmelini rupr

GB/T 8822.7-1988 中国林木种子区 云南松种子区

本标准适用于区划范围内造林用的种子。不适用于城镇绿化和试验用的种子。

seed zones of chinese forest trees--Seed zones of pinus yunnanersis franch

GB/T 8822.6-1988 中国林木种子区 马尾松种子区

本标准适用于区划范围内马尾松造林用的种子。不适用于城镇绿化和试验用的种子。

Seed zones of chinese forest trees--Seed zones of pinus massoniana lamb.

GB/T 8822.5-1988 中国林木种子区 樟子松种子区

本标准适用于区划范围内造林用的种子，不适用于城镇绿化和试验用的种子。

Seed zones of chinese forest trees--Seed zones of pinus sylvestris L.Var.mongolica litr

GB/T 6001-1985 育苗技术规程

本规程适用于露地培育的供植树造林的苗木，不适用于供城市绿化和果树的苗木。国营苗圃必须贯彻执行，集体苗圃和个体育苗户可参照执行。

Technical regulations for cultivation of tree seedlings

ASTM D8249-19(2024) 使用回转窑生产的多孔陶瓷作为景观美化和相关用途表土矿物改良剂的标准规范

1.1  This practice covers the material characteristics, physical requirements, and sampling appropriate for the designation of the rotary kiln produced porous ceramic material as a mineral amendment. The porous ceramic material can be used to replace the sand content of a topsoil or it can be blended into an existing topsoil. Typically 5-20 % by mass of porous ceramics are used when blending with or adding to a topsoil. 1.2  The potential/success of a topsoil amendment is measured/determined by its ability to provide or enhance some or all of the desired properties/characteristics of the topsoil that may be deficient in the unamended topsoil. 1.3  Soils typically consist of three components: water, air and solids. Solids can be further divided into two sub-components: organic matter, such as peat, muck or other decayed matter, and inorganic mineral matter, such as clay, silt and sand. Porous ceramic falls into the inorganic mineral matter sub-component and is generally used in horticultural topsoil applications as a substitute/alternative or addition for the sand component of soil. See Specification D5268 , Table 1. 1.4  Units— The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information only and are not considered standard. Reporting of test results in units other than SI shall not be regarded as nonconformance with this standard. 1.5  All observed and calculated values shall conform to the guidelines for significant digits and rounding established in Practice D6026 , unless superseded by this test method. 1.5.1  The procedures used to specify how data are collected/recorded and calculated in the standard are regarded as the industry standard. In addition, they are representative of the significant digits that generally should be retained. The procedures used do not consider material variation, purpose for obtaining the data, special purpose studies, or any considerations for the user’s objectives; and it is common practice to increase or reduce significant digits of reported data to be commensurate with these considerations. It is beyond the scope of these test methods to consider significant digits used in analysis methods for engineering data. 1.6  This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process. 1.7  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Use of Rotary Kiln Produced Porous Ceramic as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes

T/UNP 108-2024 风景园林绿化植物种植技术规范

前言 1  范围 2  规范性引用文件 3  术语和定义 4  基本要求 5  种植前准备 6  乔木与灌木种植 7  花卉与地被种植 8  草坪建植 9  藤本类植物种植 10  水生与湿生植物种植 11  竹类植物种植 12  设施空间植物种植 13  非适宜季节植物种植 附录A（规范性）  苗木质量要求

Technical specification for planting landscape and greening plants

T/CSF 0091-2024 科学绿化服务组织能力评价规范

本文件规定了科学绿化服务组织的类型与等级、评价条件、工作流程、日常管理等，适用于全国范围内从事科学绿化服务组织的能力评价。

Standard for capability evaluation of scientific greening service organization

DB1529/T 1-2024 飞播造林成效调查监测技术规范

本文件适用于阿拉善盟飞播造林成效调查监测，其他地区可参照执行。

Technical specifications for investigation and monitoring of aerial seeding afforestation effectiveness

T/UNP 100-2024 市政园林工程建设管理与材料验收技术规范

前言　 1  范围　 2  规范性引用文件　 3  术语和定义　 4  建设要求　 5  管理要求　 6  材料验收　 7  监督与投诉　

Technical specification for construction management and material acceptance of municipal landscape architecture engineering

DB1309/T 297-2024 观赏灌木修剪技术规程

Technical regulations for pruning ornamental shrubs

DB1309/T 296-2024 公园绿地智慧园林建设指南

Guide to the Construction of Smart Gardens in Parks and Green Spaces

DB1309/T 298-2024 园林绿地乔木修剪技术规程

Technical regulations for pruning trees in gardens and green areas