65.060.35 灌溉和排放设备 标准查询与下载

DB11/T 722-2022 节水灌溉工程自动控制系统设计规范

Design specifications for automatic control systems for water-saving irrigation projects

22/30385448 DC BS ISO 21622-2 灌溉技术 灌溉远程监测和控制 第 2 部分：测试

BS ISO 21622-2. Irrigation techniques. Remote monitoring and control for irrigation - Part 2. Tests

GSO ISO 15886-4:2022 灌溉设备 灌溉喷头 第4部分：耐久性试验方法

This document specifies the conditions and methods for testing the durability of rotating sprinklers for irrigation. The term sprinkler is used here in a broad generic sense and is meant to cover a wide variety of products as classified in ISO 15886-1, which applies to all irrigation sprinkler classifications having both static parts and moving parts during operation, as defined by the manufacturer. For any given sprinkler, a wide range of nozzle configurations, operating conditions, and adjustments generates at least a theoretical need for a correspondingly large number of tests. Testing agencies and manufacturers can use interpolation techniques to reduce the number of actual test runs, provided accuracy standards are still being met.

Irrigation equipment — Irrigation sprinklers — Part 4: Test methods for durability

22/30385451 DC BS ISO 21622-3 灌溉技术 灌溉远程监测和控制 第 3 部分：互操作性

BS ISO 21622-3. Irrigation techniques. Remote monitoring and control for irrigation - Part 3. Interoperability

KS B ISO 18471:2022 农业灌溉设备.过滤器.过滤等级的验证

Agricultural irrigation equipment — Filters — Verification of filtration grade

KS B ISO 15886-1-2022 农业灌溉设备.洒水器.第1部分:术语和分类的定义

Agricultural irrigation equipment — Sprinklers — Part 1: Definition of terms and classification

KS B ISO 15886-1:2022 农业灌溉设备.洒水器.第1部分:术语和分类的定义

Agricultural irrigation equipment — Sprinklers — Part 1: Definition of terms and classification

KS B ISO 15873-2022 灌溉设备.差压文丘里型液体添加剂注射器

Irrigation equipment — Differential pressure Venturi-type liquid additive injectors

KS B ISO 18471-2022 农业灌溉设备.过滤器.过滤等级的验证

Agricultural irrigation equipment — Filters — Verification of filtration grade

KS B ISO 15873:2022 灌溉设备.差压文丘里型液体添加剂注射器

Irrigation equipment — Differential pressure Venturi-type liquid additive injectors

ASTM F2648/F2648M-22 陆地排水用50mm-1500mm[2in.-60in.]环形波纹型壁聚乙烯（PE）管和配件的标准规范

1.1 This specification covers requirements and test methods for annular corrugated profile wall polyethylene pipe and fittings with an interior liner. The inside diameters covered are 50 mm to 1500 mm [2 in. to 60 in.]. 1.2 The requirements of this specification are intended to provide non-pressure (gravity flow) pipe and fittings for underground use for subsurface and land drainage systems, which do not operate under surcharge pressure heads. NOTE 1—Pipe and fittings produced in accordance with this specification are be installed in compliance with Practice D2321 or Practice F449 based on diameter limitations within the respective standards. NOTE 2—Subsurface and land drainage systems pertain principally to non-municipal or private facilities for water table control, storm drainage and agricultural drainage applications. The products supplied under this specification are not intended for any sanitary sewer or municipal storm sewer applications. 1.3 This specification covers pipe and fittings with an interior liner using an annular exterior corrugated profile (Fig. 1). 1.4 This specification permits the use of recycled materials for pipe in accordance with the requirements in Section 5. 1.5 Units—The values stated in either SI units or inchpound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for 50 mm to 1500 mm [2 in. to 60 in.] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications

ISO 24649:2022 农业灌溉设备.手动和液压操作塑料阀

This document specifies the general requirements and test methods for manually operated and hydraulically operated plastics valves intended for use in agricultural irrigation systems. It is applicable to manually operated and hydraulically operated plastics valves (as indicated in Table A.2) of nominal sizes DN 8 (1/4") to DN 200 (8").

Agricultural irrigation equipment — Manually and hydraulically operated plastics valves

T/NJ 1142-2022 绞（卷）盘式喷灌机 性能评价规范

本文件规定了绞（卷）盘式喷灌机的性能等级评价指标、其他要求、试验方法、检验规则和性能等级标识。 本文件适用于单喷头的绞（卷）盘式喷灌机。

Reel sprinkling irrigation machines—Specification for performance evaluation

T/HEMPA 0001-2021 潜水电机定、转子检验及验收技术规范

本文件规定了潜水电机冲片及定、转子的技术要求、检验方法、验收规则。 本文件适用于井用潜水电机、小型潜水电泵用电机、污水污物潜水电泵用电机的定、转子的检验验收与交付。

Technical specification for inspection and acceptance of submersible motor stator and rotor

BS ISO 13457:2021 农业灌溉设备 水驱动化学注射泵

Agricultural irrigation equipment. Water-driven chemical injector pumps

BS ISO 11738:2021 农业灌溉设备 控制头

Agricultural irrigation equipment. Control heads

ISO 13457:2021 农业灌溉设备.水驱动化学喷射泵

This document specifies the construction, operational requirements and test methods for water-driven chemical injector pumps (hereinafter, water-driven injector pumps). These water-driven injector pumps are used to inject chemicals into irrigation systems. The chemicals include liquid fertilizers and solutions of fertilizers and other soluble agricultural chemicals such as acids and pesticides. This document is applicable to water-driven injector pumps intended to operate at water temperatures of up to 50 °C and with the types and concentrations of chemicals routinely applied in irrigation. It does not cover the function of backflow prevention devices, nor is it applicable to water-driven devices for injecting chemicals into an irrigation system operating on the basis of the Venturi principle.

Agricultural irrigation equipment — Water-driven chemical injector pumps

ISO 11738:2021 农业灌溉设备. 水头控制器

This document specifies requirements for the components and method of installation of pressurized irrigation system control heads, referred to hereinafter as irrigation control heads, with a nominal size of up to and including 200 mm (nominal size of an irrigation control head or nominal size of a component). This document is applicable only to the above-ground components of irrigation control heads for sprinkler irrigation and micro-irrigation (mini-sprinklers, drip irrigation, etc.). It is applicable to the basic irrigation control head, on which other irrigation control and command components (electrical, electronic and hydraulic) can be assembled, but does not deal with these additional components. This document is not applicable to systems and/or components that can be required to prevent the water from freezing in the irrigation control head, such as dry-barrel hydrants or other types of hydrants. This document does not specify construction or operating requirements for the individual components that make up the irrigation control head. These requirements are specified in the relevant standards for each component.

Agricultural irrigation equipment - Control heads

T/JSQA 106-2021 远射程测控一体化喷灌机

本文件适用于远射程测控一体化喷灌机。该设备主要应用在渠灌区以替代田间部分斗渠或农渠渠道，实现规模化、机械化、高效化节水灌溉作业。

Long range measurement and control integrated irrigation machine

BS ISO 10522:2021 农业灌溉设备 直接作用压力调节阀

Agricultural irrigation equipment. Direct-acting pressure-regulating valves