71.060.10 化学元素 标准查询与下载
共找到 392 条与 化学元素 相关的标准，共 27 页
이 표준은 시료를 기화시킨 후 산업용 액체 염소 내의 부피 측정에 의한 염소 함유량의 정량
Liquid chlorine for industrial use-Determination of the content of chlorine by volume in the vaporized product
- ICS
- 71.060.10
- CCS
- G10
- 发布
- 2012-12-24
- 实施
- 2012-12-24
Liquid chlorine for industrial use－Method of sampling(for determining only the volumetric chlorine content)
- ICS
- 71.060.10
- CCS
- 发布
- 2012-12-24
- 实施
Testing of carbonaceous materials.Determination of the Mettler softening point.Binding and impregnating materials
- ICS
- 71.060.10
- CCS
- Q52
- 发布
- 2012-12
- 实施
Testing of carbonaceous materials - Determination of bulk density and the open porosity
- ICS
- 71.060.10
- CCS
- Q52
- 发布
- 2012-12
- 实施
Testing of carbonaceous materials - Determination of content of dedusting substances in cokes by extraction - Solid materials
- ICS
- 71.060.10
- CCS
- D24
- 发布
- 2012-12
- 实施
本标准规定了电子工业用粒状一氧化铅的要求、试验方法、检验规则、标志、标签和包装、运输、贮存、安全。 本标准适用于电子工业用粒状一氧化铅。主要用于制造玻壳和铅玻璃等原料。
Granular lead for electronic industrial use
- ICS
- 71.060.10
- CCS
- G13
- 发布
- 2012-11-07
- 实施
- 2013-03-01
Testing of carbonaceous materials - Determination of ash value - Solid materials
- ICS
- 71.060.10
- CCS
- Q50
- 发布
- 2012-11
- 实施
Testing of carbonaceous materials - Determination of water content - Solid matters
- ICS
- 71.060.10
- CCS
- Q50
- 发布
- 2012-11
- 实施
Testing of carbonaceous materials - Determination of apparent density after tamping - Solid materials
- ICS
- 71.060.10
- CCS
- Q50
- 发布
- 2012-10-01
- 实施
Testing of carbonaceous materials - Determination of density with liquid pycnometer - Binding and impregnating materials
- ICS
- 71.060.10
- CCS
- Q50
- 发布
- 2012-10-01
- 实施
Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
- ICS
- 71.060.10
- CCS
- Q50
- 发布
- 2012-03-01
- 实施
Practice For Reporting Uniaxial Strength Data And Estimating Weibull Distribution Parameters For Graphite
- ICS
- 71.060.10
- CCS
- Q51
- 发布
- 2012
- 实施
This Gulf standard is concerned with specifications and requirements related to Sodium Lauryl Ether Sulfate (SLES) used in some types of cosmetics and industrial detergents for its cleaning and emulsifying properties.
Sodium Lauryl Ether Sulfate
- ICS
- 71.060.10
- CCS
- 发布
- 2011-10-12
- 实施
The oil absorption number of a carbon black is related to the processing and vulcanizate properties of rubber compounds containing the carbon black.1.1 This test method covers the determination of the oil absorption number of carbon black. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Carbon Blackx2014;Oil Absorption Number (OAN)
- ICS
- 71.060.10
- CCS
- G49
- 发布
- 2011
- 实施
This test method is used to measure the total and external surface area of carbon blacks based on multipoint nitrogen adsorption. The NSA measurement is based on the B.E.T. theory and it includes the total surface area, inclusive of micropores, pore diameters less than 2 nm (20 ?/span>). The external surface area, based on the statistical thickness method (STSA), is defined as the specific surface area that is accessible to rubber. CTAB Surface Area (formerly Test Method D3765) has been withdrawn. The CTAB value may be estimated from the STSA value using Eq 1. The equation is based on a linear regression of the STSA and CTAB measured values of the SRB 5 standards.1.1 This test method covers the determination of the total surface area by the Brunauer, Emmett, and Teller (B.E.T. NSA) theory of multilayer gas adsorption behavior using multipoint determinations and the external surface area based on the statistical thickness surface area method. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (The minimum safety equipment should include protective gloves, sturdy eye and face protection).
Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
- ICS
- 71.060.10
- CCS
- 发布
- 2010-08-01
- 实施
Testing of carbon materials - Determination of bulk density of cylindrically machined electrodes
- ICS
- 71.060.10
- CCS
- Q50
- 发布
- 2010-06
- 实施
Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
- ICS
- 71.060.10
- CCS
- 发布
- 2010-05-01
- 实施
Standard Test Method for Moisture in a Graphite Sample
- ICS
- 71.060.10
- CCS
- 发布
- 2010-05-01
- 实施
Standard Test Method for Ash in a Graphite Sample
- ICS
- 71.060.10
- CCS
- 发布
- 2010-05-01
- 实施
Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
- ICS
- 71.060.10
- CCS
- G92
- 发布
- 2010
- 实施
