71.060.40 碱 标准查询与下载

HG/T 2566-2014 工业氢氧化钡

本标准规定了工业氢氧化钡的要求，试验方法，检验规则以及标志、标签，包装、运输和贮存。 本标准适用于工业氢氧化钡。该产品主要用于石油加工、精制动植物油、精细化工、日用化工及生产其他钡盐等。

Barium hydroxide for industrial use

DB34/T 2192-2014 高纯氢氧化钠中氯离子和硫酸根含量的测定 离子色谱法

本标准规定了高纯氢氧化钠中氯离子和硫酸根的测定方法。 本标准适用于高纯氢氧化钠中氯离子和硫酸根的测定。

Determination of Chloride and Sulfate Content in High Purity Sodium Hydroxide by Ion Chromatography

DB63/T 1296-2014 工业碳酸钠中氯化钠、硫酸盐含量的测定 离子色谱法

本标准规定了工业碳酸钠中氯化钠、硫酸盐含量的测定范围、试验方法和允许差。本标准适用于工业碳酸钠中（质量分数）氯化钠0.02%~2.5%、硫酸盐0.01%~0.8%含量的测定。

Determination of sodium chloride and sulfate content in industrial sodium carbonate by ion chromatography

HG/T 4506-2013 工业氢氧化钴

本标准规定了工业氢氧化钴的分类、要求、试验方法、检验规则、标志、标签、包装、运输和贮存。本标准适用于工业氢氧化钴。工业氢氧化钴主要用作生产其他钴盐的原料,电子工业用原料,陶瓷工业中用作着色剂,油墨、涂料、油漆催干剂、子午轮胎快速粘接剂等,也用作电池工业用原料。

Cobalt hydroxide for industrial use

HG/T 3815-2013 工业离子膜法氢氧化钾溶液

本标准规定了工业离子膜法氢氧化钾溶液的分型、要求、试验方法、检验规则、标志、标签、包装、运输和贮存。本标准适用于精制氯化钾经离子膜法电解所得的氢氧化钾溶液。该产品主要用于电池行业、电子行业、高级洗涤剂和化妆品、各种钾盐、医药中间体、合成橡胶、ABS树脂和天然橡胶乳液、发酵、纸张分量剂等。

Potassium hydroxide solution by ion exchange membrance method

HG/T 4530-2013 氢氧化铝阻燃剂

本标准规定了氢氧化铝阻燃剂的分型、要求、试验方法、检验规则、标志、标签、包装、运输和贮存。本标准适用于以铝土矿为原料制得的氢氧化铝阻燃剂,该产品用于橡胶、塑料、化工、电线电缆、建材等领域。

Flame retardant.Aluminum hydroxide

HG/T 4531-2013 阻燃剂用氢氧化镁

本标准规定了阻燃剂用氢氧化镁的分类,要求,试验方法,检验规则,标志、标签,包装、运输、贮存。本标准适用于阻燃剂用氢氧化镁。该产品主要用作阻燃剂的原料,用于橡胶、塑料、化工、电线电缆、建材等领域。

Magnesium hydroxide for flame retardant

KS M ISO 3196:2012 工业用氢氧化钠.碳酸盐含量的测定.滴定法

이 표준은 산업용 수산화 소듐의 탄산염 함유량을 정량하기 위한 적정법에 대해서 규정한다.

Sodium hydroxide for industrial use－Determination of carbonates content－Titrimetric method

KS M 1104-2012 纯碱灰分

이 표준은 산업용 소다회(이하 소다회라 한다.)에 대하여 규정한다.

Soda ash

GOST R 55064-2012 工业用氢氧化钠. 规范

Sodium hydroxide for industrial use. Specifications

SNI 0074-2011 工业级固体和液体烧碱

Technical grade solid and liquid caustic soda

HG/T 3688-2010 高品质片状氢氧化钾

本标准规定了高品质片状氢氧化钾的分型、要求、试验方法、检验规则、标志、标签、包装、运输、贮存和安全。 本标准适用于精制氯化钾离子膜法电解所得的高品质片状氢氧化钾。该产品主要用于电池行业、高级洗涤剂和化妆品。歧化松香钾皂和各种钾盐、医药中间体、合成橡胶、ABS树脂和天然橡胶乳液、发酵、纸张分量剂、农药制造等。

Flaky and high-quality potassium hydroxide

KS M 1417-2010(2020) 碱式碳酸镁

Magnesium hydroxide carbonate

KS M 1417-2010 氢氧化碳酸镁

이 표준은 산업용 수산화 탄산 마그네슘(이하 수산화 탄산 마그네슘이라 한다.)에 대하여 규

Magnesium hydroxide carbonate

KS M 1406-2010 氢氧化钡

이 표준은 산업용 수산화 바륨(이하 수산화 바륨이라 한다.)에 대하여 규정한다.

Barium hydroxide

YS/T 705-2009 填料用氢氧化铝分析方法.色度的测定

本标准规定了填料用氢氧化铝色度的测定方法。 本标准适用于填料用氢氧化铝色度的测定。测定范围：L*：80.00～99.99；a*：-0.50～0.50；b*：-0.20～1.30。

Analysis methods of aluminum hydroxide for filler conductance.Determination of chrominance

HG/T 4120-2009 工业氢氧化钙

本标准规定了工业氢氧化钙的要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于工业氢氧化钙。该产品主要用于制备漂白粉、钙基热稳定剂；用于染料分散剂、废水处理、烟气脱硫、垃圾焚烧、涂料、制革、化工合成等领域。

Calcium hydroxide for industrial use

YS/T 704-2009 填料用氢氧化铝分析方法.电导率的测定

本标准规定了填料用氢氧化铝电导率的测定方法。 本标准适用于填料用氢氧化铝电导率的测定。测定范围：＞5μS/cm。

Analysis methods of aluminum hydroxide for filler conductance.Determination of electrical conductivity

ASTM E291-09 苛性钠和苛性钾(氢氧化钠和氢氧化钾)的化学分析的标准试验方法

Caustic soda and caustic potash are used in a large number of manufacturing processes. The chemicals are available in several grades depending on their intended use. The test methods listed in 1.2 provide procedures for analyzing caustic soda and caustic potash to determine if they are suitable for their intended use.1.1 These test methods cover only the analyses usually required on the following commercial products: 1.1.1 Caustic soda (sodium hydroxide), 50 and 73 % liquors; anhydrous (solid, flake, ground, or powdered), and 1.1.2 Caustic potash (potassium hydroxide), 45 % liquor; anhydrous (solid, flake, ground, or powdered). 1.2 The analytical procedures appear in the following order: Alkalinity (Total), Titrimetric (for 50 to 100 % NaOH and 45 to 100 % KOH) 8 to 14 Carbonate, Gas-Volumetric (0.001 g CO2, min)15 to 24 Carbonate, Gravimetric (0.001 g CO2, min)25 to 33 Chloride, Titrimetric, (0.001 g Cl−, min)34 to 40 Chloride, Potentiometric Titration (0.3 to 1.2 %)41 to 47 Chloride, Ion Selective Electrode (0.6 to 120 μg/g)48 to 55 Iron, Photometric (0.005 mg Fe, min)56 to 64 Sulfate, Gravimetric, (0.002 g SO3, min)65 to 71 Keywords72 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard with the exception of inch-pound units for apparatus descriptions. 1.4 Review the current Material Safety Data Sheet (MSDS) for detailed information concerning toxicity, first-aid procedures, handling, and safety precautions. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 6. 8.1 This test method covers the determination of the total alkalinity of 50 and 73 % liquid caustic soda, 45 % liquid caustic potash, and anhydrous caustic soda and caustic potash. 15.1 This test method describes the gas-volumetric determination of sodium carbonate or potassium carbonate in caustic soda or caustic potash respectively. The lower limit of determination is 0.001 g as carbon dioxide. 25.1 This test method covers the gravimetric determination of carbonate in caustic soda or caustic potash. The lower limit of determination is 0.001 g as carbon dioxide. 34.1 This test method covers the volumetric determination of chloride in caustic soda or caustic potash by the Volhard test method. The lower limit of determination is 0.001 g as chloride. 41.1 This test method was developed for the analysis of chloride in caustic soda and caustic potas......

Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)

KS M 1403-2008 苛性钠(固体形)

이 표준은 산업용, 수돗물용 및 화섬용 수산화 나트륨(고체형, 액체형)의 시험방법에 대하여

Sodium hydroxide