71.100.50 木材防护化学药品 标准查询与下载
共找到 498 条与 木材防护化学药品 相关的标准，共 34 页
Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact - Horizontal lap-joint method
- ICS
- 71.100.50
- CCS
- 发布
- 2020-12-00
- 实施
Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
- ICS
- 71.100.50
- CCS
- 发布
- 2020-11-12
- 实施
- 2020-11-12
Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
- ICS
- 71.100.50
- CCS
- 发布
- 2020-11-12
- 实施
- 2020-11-12
Durability of wood and wood-based products - Assessment of the effectiveness of a masonry fungicide to prevent growth into wood of Dry Rot Serpula lacrymans (Schumacher ex Fries) S.F. Gray - Laboratory method
- ICS
- 71.100.50
- CCS
- 发布
- 2020-11-09
- 实施
- 2020-11-09
Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
- ICS
- 71.100.50
- CCS
- 发布
- 2020-10-30
- 实施
- 2020-10-30
Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
- ICS
- 71.100.50
- CCS
- 发布
- 2020-10-30
- 实施
- 2020-10-30
What is BS EN 84 about? BS EN 84 discusses the leaching procedures for wood and wood-based products. EN 84 specifies a method for leaching, applicable to test specimens of wood or wood-based products which are subsequently subjected to biological tests. Note 1: BS EN 84 is applicable to: The pre-conditioning of test specimens prior to their being subjected to a biological test Assessment of loss of effectiveness by comparing the performance in a biological test of treated test specimens subjected to this procedure with others that have not undergone any leaching procedure Note 2: The method used for pre-conditioning of untreated wood, modified wood, and wood-based panel products, whether they received preservative treatment or not. Who is BS EN 84 for? BS EN 84 on leaching procedure for accelerated ageing of treated wood is useful for: Wood and wood products manufacturers Quality control laboratories Why should you use BS EN 84 ? Wood is a renewable material, with many end-uses from furniture, craft, and art to building purposes.
Durability of wood and wood-based products. Accelerated ageing of treated wood prior to biological testing. Leaching procedure
- ICS
- 71.100.50
- CCS
- 发布
- 2020-08-31
- 实施
- 2020-08-31
What is BS EN 73 about? BS EN 73 specifies an evaporative ageing procedure, applicable to test specimens of wood and wood-based products which are subsequently subjected to biological tests. Note: The method can also be used for pre-conditioning of untreated wood, modified wood and wood-based panel products, whether they received preservative treatment or not. Who is BS EN 73 for? BS EN 73 on the e vaporative ageing procedure for accelerated ageing of treated wood is useful for: Wood and wood products manufacturers
Durability of wood and wood-based products. Accelerated ageing of treated wood prior to biological testing. Evaporative ageing procedure
- ICS
- 71.100.50
- CCS
- 发布
- 2020-08-31
- 实施
- 2020-08-31
What is BS EN 1390 about? BS EN 1390 discusses Wood preservatives. BS EN 1390 specifies a method for the determination of the eradicant action of a surface application of a fast and a slow-acting wood preservative product or a deferred acting wood preservative product on solid wood infested with larvae of Hylotrupes bajulus (Linnaeus). BS EN 1390 simulates conditions in practice where a beam is treated, which is only slightly attacked and were cutting away has not exposed insect tunnels. This represents a severe test of the product. Note1: This method is applicable to: Organic formulations, as supplied or as prepared in the laboratory by dilution of concentrates, or organic water-dispersible formulations, as supplied or as prepared in the laboratory by dilution of concentrates, or water-soluble products, for example, salts .
Wood preservatives. Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae. Laboratory method
- ICS
- 71.100.50
- CCS
- 发布
- 2020-04-30
- 实施
- 2020-04-30
This document specifies the minimum performance requirements in biological tests for products for curative uses against specific wood destroying organisms. It specifies the biological tests required together with the efficacy criteria to be achieved in each test. Chemicals against insects can act according to their specific properties within a short time (fast acting) or only after a long period (slow acting or with a deferred effect). Different tests and efficacy requirements are needed for these various types of curative wood preservatives. This document is applicable to all wood preservative products supplied for application in liquid form for curative uses against attack by wood boring beetles. This document is also applicable for products applied to prevent the growth of the dry rot fungus through masonry. This document is also applicable to products for curative uses supplied for application as pastes, solids or in capsule form but only where appropriate biological methods of test exist as published European Standards. NOTE This standard is used as a reference document for the evaluation of efficacy of biocidal products PT8 (wood preservatives) in the framework of the European Regulation on Biocidal Products (EU) No 528/2012 (BPR). This document is not applicable to products used as fumigants. This document is also not applicable for determining whether specific curative products, used alone or in combination, are effective in conferring long-term protection against attack by wood destroying organisms. Preventive effectiveness can be determined using EN 599-1 but only for products that can be tested using the methods and interpretative procedures defined in EN 599-1. Annex A (informative) contains a guidance on re-testing after making variations in product formulation. Annex B (informative) contains some test recommendations for specific curative products against other insect species than Hylotrupes bajulus and Anobium punctatum.
Durability of wood and wood-based products - Efficacy criteria for curative wood preservatives as determined by biological tests
- ICS
- 71.100.50
- CCS
- 发布
- 2020-03-25
- 实施
- 2020-06-30
1.1 This practice covers procedures for the evaluation of laminated veneer lumber (LVL) pressure-treated with commercially available fire retardants after exposure to both standard environmental conditions and an extended exposure to elevated temperature. 1.2 LVL products utilizing overlays or fire-retardant paints and coatings require other considerations and are outside of the scope of this practice. 1.3 LVL products manufactured for rim board applications require other considerations and are outside of the scope of this practice. 1.4 This practice provides one method to establish design values for fire-retardant treated (FRT) LVL. It is not intended to preclude the use of alternative methods for deriving design values, such as Test Method D5664 and Practice D6841 for FRT lumber. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Practice for Evaluation of Fire-Retardant Treated Laminated Veneer Lumber
- ICS
- 71.100.50
- CCS
- 发布
- 2019-07-01
- 实施
本标准规定了人造板乳液防水剂的产品分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存、质量承诺等内容。 本标准适用于以石蜡、乳化剂为主要原料，经乳化而成用于人造板的乳液防水剂。
Wood-based panel waterproofing agent
- ICS
- 71.100.50
- CCS
- C266
- 发布
- 2018-10-26
- 实施
- 2019-03-15
Preservative treatments of woods by hot and cold bath methods
- ICS
- 71.100.50
- CCS
- 发布
- 2018-09-20
- 实施
Methods for determining penetration and retention of preservatives in treated wood
- ICS
- 71.100.50
- CCS
- 发布
- 2018-09-20
- 实施
Preservative treatments of woods by pressure processes
- ICS
- 71.100.50
- CCS
- 发布
- 2018-09-20
- 实施
1.1 This test method covers the laboratory evaluation of treated or untreated solid wood for its resistance to subterranean termites. This test is considered as a screening test for treated material and further evaluation by field methods is required. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (Warning—See 7.1.4.)
Standard Test Method for Laboratory Evaluation of Solid Wood for Resistance to Termites
- ICS
- 71.100.50
- CCS
- 发布
- 2017-01-01
- 实施
Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method); German version EN 47:2016
- ICS
- 71.100.50
- CCS
- B71
- 发布
- 2016-11
- 实施
Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 2: Ovicidal effect (laboratory method); German version EN 46-2:2016
- ICS
- 71.100.50
- CCS
- B71
- 发布
- 2016-11
- 实施
Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 1: Application by surface treatment (Laboratory method); German version EN 49-1:2016
- ICS
- 71.100.50
- CCS
- B71
- 发布
- 2016-11
- 实施
