共找到 1183 条与 铁矿 相关的标准,共 79 页
本标准规定了火焰原子吸收光谱法测定铁矿石中铅含量。 本标准适用于天然铁矿石、铁精矿和块矿,包括烧结产品中铅含量的测定。测定范围(质量分数):0.001%~0.500%。
Iron ores-Determination of lead content-Flame atomic absorption spectrometric method
本标准规定采用筛孔≥36 μm的筛子测定铁矿石粒度分布的筛分方法。粒度分布以选定筛子的筛下或筛上物的质量和质量百分数表示。本标准的目的是为涉及铁矿石粒度测定的试验以及供需合同方的使用提供依据。 当本标准用于对比试验时,有关方应就具体所用方法的选择达成协议,以免事后争议。
Iron ore-Determination of size distribution by sieving
本标准规定了火焰原子吸收光谱法测定铁矿石中锌含量。 本标准适用于天然铁矿石、铁精矿和块矿,包括烧结产品中锌含量的测定。测定范围(质量分数):0.001%~0.5%。
Iron ores-Determination of zinc content-Flame atomic absorption spectrometric method
本标准规定了火焰原子吸收光谱法测定铁矿石中铬含量。 本方法适用于天然铁矿石、铁精矿和烧结矿,包括烧结产品中铬含量测定。测定范围(质量分数):0.003%~0.100%。
Iron ores-Determination of chromium content-Flame atomic absorption spectrometric method
本标准规定了火焰原子吸收光谱法测定铁矿石中钒含量。 本标准适用于天然铁矿石、铁精矿和烧结矿,包括烧结产品中钒含量的测定。测定范围(质量分数):方法1为0.005%~0.05%,方法2为0.05%~0.5%。
Iron ores-Determination of vanadium content-Flame atomic absorption spectrometric methods
本标准规定了火焰原子吸收光谱法测定铁矿石中铝含量。 本标准适用于天然铁矿石、铁精矿和烧结矿,包括烧结产品中铝含量的测定。测定范围(质量分数):0.1%~5.O%。
Iron ores-Determination of aluminum content-Flame atomic absorption spectrometric method
本标准规定了铁矿石交货批水分含量的测定方法。 本标准规定的方法适用于所有类型的铁矿石,不管是天然的、还是加工过的。
Iron ores-Determination of moisture content of a consignment
当按照GB/T 10322.1规定方法进行取样时,本标准规定的试验方法是以GB/T 10322.1的停带取样法作为标准方法来校核铁矿石的取样偏差。
Iron ores-Experimental methods for checking the bias of sampling
本标准所规定的实验方法是校核按照GB/T 10322.1所规定的方法进行铁矿石取样的精密度。 注:也可应用这些方法校核制样和测定精确度。
Iron ores-Experimental methods for checking the precision of sampling
本标准规定了评定各种类型铁矿石品质波动的试验方法,适用于铁矿石贸易和各种取制样装置。 本标准规定了两种不同的方法。第一种方法是按GB/T 10322.1所述的分层取样法或系统取样法取出份样,随后交替合并组成若干对的副样并分析。第二种方法是采取和分析各个份样,然后用变量法分析数据。 用交替副样做的工作较少,采用变量法能更好的估计品质波动,从而能更好的估计取样偏差。变量法更适用于精确的取样操作。 注:如果流量基本均匀,本试验方法大体上也适用于定时取样。
Iron ores-Experimental methods for evaluation of quality variation
本标准规定,为测定交货批的化学成分、水分含量和粒度分布,从一个交货批在转运过程中机械取样、手工取样和制样的方法,包括: a)基础理论; b)取样和制样的基本原则; c)取样系统的设计、安装和操作的基本要求。 物理试验的取样和制样方法按国际标准ISO 10836中的规定执行。 本标准中规定的这些方法适用于可安装机械取样机或可安全地进行人工取样的带式输送机和其他矿石运输设备对交货批装载和卸载取样。 这些方法适用于所有的铁矿石,无论是天然的还是加工的铁矿石(例如精矿粉和诸如球团矿或烧结矿之类的人造块矿)。
Iron ores-Sampling and sample preparation procedures
本标准规定了测定烧结矿和球团矿转鼓指数和抗磨指数的方法,用以检验烧结矿和球团矿的抗冲击性和耐磨性。 本检验方法适用于高炉用的烧结矿和球团矿,检验常温下上述的机械强度。
Iron one pellets and slnter - Determination of tumbler strength
Iron ores for blast furnace feedstocks. Determination of the decrepitation index
Iron ores — Determination of phosphorus content — Titrimetric method
BS ISO 8371. Iron ores for blast furnace feedstocks. Determination of the decrepitation index
本文件规定了冶金矿山贫磁铁矿石资源化利用的术语和定义、原理与工艺、技术要求、试验方法等。 本文件适用于冶金矿山行业贫磁铁矿石资源化利用。
Technical specification for resource utilization of lean magnetite
Iron ores for blast furnace feedstocks — Determination of the decrepitation index
Iron ores — Determination of sulfur content — Part 1: Barium sulfate gravimetric method
1 Scope This document specifies a method to provide a relative measure for evaluating the increase in volume of iron ore pellets, when reduced in an unconstrained bed under conditions resembling those prevailing in the reduction zone of a blast furnace. It specifies the determination of the free-swelling index. This document is applicable to hot-bonded pellets.
Iron ore pellets for blast furnace feedstocks - Determination of the free-swelling index
Iron ores — Determination of aluminium — Part 1: Flame atomic absorption spectrometric method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号