73.100.30 钻井和挖掘设备 标准查询与下载

GOST R 51924-2002 勘探钻井用复式岩心管的一般技术规范

Double tube core barrel for exploration drilling. General technical specifications

KS E 3116-2001(2016) 气动螺旋钻性能试验方法

METHOD OF PERFORMANCE TEST FOR AIR AUGER DRILLS

KS E 3116-2001 气动钻机性能测试方法

이 규격은 압축 공기를 원동력으로 하여 회전에 의해 주로 발파 구멍의 천공을 하는 에어 오

Method of performance test for air auger drills

BS 4019-5:1999 旋转岩心钻探设备 旋转岩心钻探设备 绳索金刚石钻探设备规范 系统 A. 公制单位

This part of ISO 10097 specifies the nomenclature and the leading dimensions necessary for the interchangeability of the following wireline drilling equipment for drilling holes 48 mm to 96 mm in diameter, yielding cores of 27 mm to 63 mm in diameter. The equipment is illustrated in Figure 1 and comprises the following: a) core bit; b) reaming shell; c) core lifter; d) core lifter case; e) outer tube; f) inner tube; g) drill rod (smooth pipe only).

Rotary core drilling equipment. Rotary core drilling equipment. Specification for wireline diamond drilling equipment. System A. Metric units

ISO 10097-2:1999 金刚石绳索取心钻探设备 系列A 第2部分:英制单位

This part of ISO 10097 specifies the nomenclature and the leading dimensions necessary for the interchangeability of the following wireline drilling equipment for drilling holes of diameter 1,890 in to 3,790 in, yielding cores of diameter 1,063 in to 2,500 in. The equipment is illustrated in Figure 1 and comprises the following: a) core bit; b) reaming shell; c) core lifter; d) core lifter case; e) outer tube; f) inner tube; g) drill rod (smooth pipe only).

Wireline diamond core drilling equipment - System A - Part 2: Inch units

ISO 10097-1:1999 金刚石绳索取心钻探设备 系列A 第1部分:米制单位

This part of ISO 10097 specifies the nomenclature and the leading dimensions necessary for the interchangeability of the following wireline drilling equipment for drilling holes 48 mm to 96 mm in diameter, yielding cores of 27 mm to 63 mm in diameter. The equipment is illustrated in Figure 1 and comprises the following: a) core bit; b) reaming shell; c) core lifter; d) core lifter case; e) outer tube; f) inner tube; g) drill rod (smooth pipe only).

Wireline diamond core drilling equipment - System A - Part 1: Metric units

JB/T 3968-1999 矿用耙斗

　　本标准规定了矿用耙斗的型式、基本参数、技术要求、试验方法、包装、运输和贮存。 本标准适用于与耙矿绞车配套使用的耙斗。

Mining scraper

JB/T 3903-1999 TQ-16×16天井爬罐

　　本标准规定了TQ-16×16天井爬罐的型式、基本参数、技术要求、试验方法、检验规则，标志、包装、运输和贮存。 本标准适用于TQ-16×16天井爬罐。该产品主要用于地下矿山和地下水电工程掘进垂直、急倾斜、弯曲的高天井和盲井，也可用于建筑部门提运物料。

TQ-16×16 Raise climber

JB/T 3967-1999 液压操纵耙斗装岩机

　　本标准规定了液压操纵耙斗装岩机的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准主要适用于液压操纵内胀式耙斗装岩机，该设备主要用于地下矿山平巷和倾角不大于30°的斜巷掘进中配合矿车和箕斗装载矿岩。

Hydraulic operating rock slusher loader

GOST R 51245-1999 通用钢制钻杆.通用规范

Настоящий стандарт распространяется на стальные бурильные трубы с приваренными замками для бурения скважин при поисках и разведке на тве

Steel universal drill rods. General specifications

GOST 26699-1998 矿山钻探装置.一般技术要求与试验方法

Настоящий стандарт распространяется на установки бурильные шахтные с колесно-рельсовой и гусеничной ходовой частью, предназначенные для

Underground drilling rids. General specifications and test methods

MT 691-1997 雷管生产线静电电位测定方法

Detonator production line electrostatic potential measurement method

MT/T 61-1997 煤矿许用炸药井下可燃气安全度试验方法和判定规则

Test methods and determination rules for underground combustible gas safety of permitted explosives in coal mines

MT/T 62-1997 煤矿许用电雷管井下可燃气安全度试验方法和判定规则

Test methods and determination rules for underground combustible gas safety of permitted electric detonators in coal mines

DIN 22261-5:1997 褐煤露天矿挖掘机、推土机和辅助设备.第5部分:回转装置机械制动器和超载保险器

The document specifies mechanic brakes for slewing units of slewable components of bucket wheel excavators, bucket chain dredgers and stackers whose failure have such an impact on the tension state of the construction or the relative mobility of the different supporting structure units that the stability of the equipment is endangered, as well as to overload protection devices in the slewing units of these excavators in opencast lignite mines.

Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 5: Slewing brakes and overload protecting devices

DIN 22261-6:1997 褐煤露天矿挖掘机、,推土机和辅助设备.第6部分:绳索和绳索紧固试验

Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 6: Examination of ropes and rope end fittings

JB 8518-1997 地下铲运机 安全要求

本标准规定了对地下铲运机的安全要求。 本标准是从物理性能和预定使用方面对地下铲运机的限制。 本标准所包含的安全要求是针对地下铲运机所有的危险的，它适用于如在GB/T 15706.1-1995中3.11所描述的机器寿命期内各阶段所产生的危险。 本标准适用于矿山(煤矿除外)、工程、隧道中使用的地下内燃铲运机和地下电动铲运机。

Underground LHD Safety Requirements

JB/T 3776-1997 伞形钻架

本标准规定了伞形钻架的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量保证。 本标准适用于在钻爆法施工中适用的以压缩空气为动力钻凿爆破孔的伞形钻架。

Umbrella drill stand

ASTM D6151-97 使用空心螺旋桨进行岩土勘探和土壤采样的标准实践

1.1 This practice covers how to obtain soil samples using hollow-stem auger drilling methods for geotechnical exploration. This practice addresses how to obtain soil samples suitable for engineering properties testing.

Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling

MT/T 501-1996 长钻孔煤层注水方法

Long borehole coal seam water injection method