73.100.30 钻井和挖掘设备 标准查询与下载
共找到 313 条与 钻井和挖掘设备 相关的标准，共 21 页
Abstract Establishes the nomenclature and lays down the leading dimensions to ensure interchangeability within the limits of system A of the following equipment: drill rods and couplings; casings, casing couplings, casing bits, casing shoes, drive shoes and casing ream shells; core barrels, core bits, core lifters and reaming shells. Specifies the characteristics of a range of equipment for drilling holes having diameters from 30 mm to 200 mm and yielding cores having diameters from 18,5 mm to 165 mm.
Rotary core diamond drilling equipment – System A – Part 1: Metric units
- ICS
- 73.100.30
- CCS
- 发布
- 2013-04-01
- 实施
Abstract Establishes the nomenclature and lays down the leading dimensions to ensure interchangeability within the limits of system B of the following equipment: drill rods and couplings, fishing rods and couplings; casing tubes, casing drive shoes, casing shoe bits, casing bits and sediment tubes; core barrels, core bits, core lifters and reaming shells. Specifies the characteristics of a range of equipment for drilling holes having diameters from 1.42 in to 5.74 in and yielding cores from 0.87 in to 4.72 in in diameter.
Rotary core diamond drilling equipment – System B – Part 2: Inch units
- ICS
- 73.100.30
- CCS
- 发布
- 2013-04-01
- 实施
This International Standard specifies the basic dimensions of rope threaded drill steel equipment, for percussive drilling, of the following nominal sizes: 22 mm 25 mm light 25 mm 28 mm light 28 mm 32 mm light 32 mm 38 mm This equipment comprises mainly hexagonal shank rods, extension rods, coupling sleeves and drill bits.
Rock drilling equipment -- Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm
- ICS
- 73.100.30
- CCS
- 发布
- 2013-04-01
- 实施
This part of ISO 10097 specifies the nomenclature and the leading dimensions necessary for the interchangeability of the following wireline drilling equipment for drilling holes of diameter 1,890 in to 3,790 in, yielding cores of diameter 1,063 in to 2,500 in. The equipment is illustrated in Figure 1 and comprises the following: a) core bit; b) reaming shell; c) core lifter; d) core lifter case; e) outer tube; f) inner tube; g) drill rod (smooth pipe only).
Wireline diamond core drilling equipment – System A – Part 2: Inch units
- ICS
- 73.100.30
- CCS
- 发布
- 2013-04-01
- 实施
This part of ISO 10097 specifies the nomenclature and the leading dimensions necessary for the interchangeability of the following wireline drilling equipment for drilling holes 48 mm to 96 mm in diameter, yielding cores of 27 mm to 63 mm in diameter. The equipment is illustrated in Figure 1 and comprises the following: a) core bit; b) reaming shell; c) core lifter; d) core lifter case; e) outer tube; f) inner tube; g) drill rod (smooth pipe only).
Wireline diamond core drilling equipment – System A – Part 1: Metric units
- ICS
- 73.100.30
- CCS
- 发布
- 2013-04-01
- 实施
Rock drilling - Thread connections for thin-walled rotary drilling equipment - Dimensions, design
- ICS
- 73.100.30
- CCS
- D90
- 发布
- 2012-11
- 实施
Rock drilling - Round thread connections for percussive drilling equipment - Dimensions, design
- ICS
- 73.100.30
- CCS
- 发布
- 2012-11
- 实施
Continuous Surface Miner (CSM) - Safety
- ICS
- 73.100.30
- CCS
- D90
- 发布
- 2012-05
- 实施
- 2012-05-01
Pneumatic stopper drills. General technical requirements
- ICS
- 73.100.30
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
Mining equipment. Borers mining hand pneumatic. Safety requirements and methods of testing
- ICS
- 73.100.30
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
Longwall powered roof chocks. Basic parameters. General technical requirements. Test methods
- ICS
- 73.100.30
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
Mining equipment. Pneumatic hammers. Safety requirements and test methods
- ICS
- 73.100.30
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
This Standard specifies the requirements for mobile extracting machines working underground at the face. It specifies requirements for the construction, equipment marking and testing of shearer loaders, trepanners, jib-type cutters, face opening machines and plough systems. This includes their control systems and face and goaf-side guiding and haulage elements. Conveyors, spill plates and auxiliary devices such as lasers, etc., are excluded.
Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems
- ICS
- 73.100.30
- CCS
- 发布
- 2011-10-12
- 实施
This European Standard specifies the explosion protection requirements for the construction and marking of equipment that may be an individual item or form an assembly. This includes machinery and components placed on the market by a single supplier for use in mines susceptible to explosive atmospheres of firedamp and/or combustible dust (at atmospheric conditions as defined in EN 1127-2). NOTE 1 This European Standard deals only with the ignition protection of mining machinery and manufacturers will need to take account of all other relevant EU Directives relating to the construction of machines e.g. the consolidated Machinery Directive 98/37/EC. Additionally, manufacturers will need to take account of any national legislation in the country where they intend to market their equipment. NOTE 2 Where the flammable gas in the atmosphere is not predominantly methane, reference will need to be made to 4.1 in either EN 60079-0:2004 or EN 13463-1:2001. NOTE 3 The definition of ‘equipment’ is contained in EN 13463-1. The definition of ‘assembly’ can be found the ATEX guidelines, published by the European Commission. Equipment complying with the relevant clauses of this European Standard is considered to meet the requirements for equipment of Group I - Category M2. This European Standard also deals with the prevention of ignitions of explosive atmospheres caused by burning (or smouldering) of combustible material such as fabric fibres, plastic "O"-rings, rubber seals, lubricating oils or greases used in the construction of the equipment if such items could be an ignition source. For example, the mechanical failure of rotating shaft bearings can result in frictional heating that ignites its plastic cage, plastic seal or lubricating grease. See also 5.2.4 of EN 13463-1:2001. NOTE 4 The above clause of EN 13463-1 requires the ignition hazard assessment to include those components which, if they failed, could ignite any flammable substance (e.g. lubricating oil) contai
Equipment and components intended for use in potentially explosive atmospheres in underground mines
- ICS
- 73.100.30
- CCS
- 发布
- 2011-10-12
- 实施
Rock drilling - Part 1: Tapered bits for percussive flush drilling
- ICS
- 73.100.30
- CCS
- J84
- 发布
- 2011-05
- 实施
Rock drilling - Part 2: Bits with internal thread for percussive flush drilling
- ICS
- 73.100.30
- CCS
- J84
- 发布
- 2011-05
- 实施
General technical conditions for raise drilling rigs in coal mines
- ICS
- 73.100.30
- CCS
- D91
- 发布
- 2011-04-12
- 实施
- 2011-09-01
本标准规定了煤矿用反井钻机的术语和定义、型号与基本参数、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于在含有爆炸性介质的煤矿井下或其他矿山作业中的反井钻机。
General specification for raise-boring machine in coal mine
- ICS
- 73.100.30
- CCS
- D91
- 发布
- 2011-04-12
- 实施
- 2011-09-01
Equipment and components intended for use in potentially explosive atmospheres in underground mines
- ICS
- 73.100.30
- CCS
- 发布
- 2011
- 实施
- 2013-02-15
Equipment and components intended for use in potentially explosive atmospheres in underground mines
- ICS
- 73.100.30
- CCS
- 发布
- 2010-10-29
- 实施
- 2010-10-29
