钻井和挖掘设备标准-分析测试百科网

DIN 20361:2010 凿岩.钻夹套.连接尺寸、材料和设计

This standard specifies the corresponding dimensions between shanks complying with DIN 20377 and chuck bushings from drill hammers for rock drilling.

Rock drilling - Chuck bushings - Connecting dimensions, material, design

ICS: 73.100.30
CCS: J84;D92
发布: 2010-04
实施

DIN 20367:2010 凿岩机.旋转钻井设备用旋转螺丝连接件.设计尺寸

This standard specifies dimensions and designations of screw connections for rotary drilling in mining.

Rock drilling - Round screw connections for rotary drilling equipment - Dimensions, design

ICS: 73.100.30
CCS: D92;J84
发布: 2010-04
实施

JB/T 10173-2010 现场混装炸药车移动式地面辅助设施

本标准规定了现场混装炸药车移动式地面辅助设施产品的术语和定义、产品分类、型号编制、要求、试验方法、检验规则、标牌、标志、使用说明书、包装、运输和贮存的要求。本标准适用于现场混装炸药车移动式地面辅助设施。本设施包括生活车、动力车、原料制备车等，该设施适用于现场混装炸药车。

Mobile groud auxilia for site mixed and charged explosive truck

ICS: 73.100.30
CCS: D92
发布: 2010-02-11
实施: 2010-07-01

JB/T 3776-2010 伞形钻架

本标准规定了伞形钻架的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于钻爆法施工中使用的以压缩空气为动力钻凿爆破孔的伞形钻架。

Umbrella drilling derrick

ICS: 73.100.30
CCS: D91
发布: 2010-02-11
实施: 2010-07-01

DIN EN 1710:2008 计划用于地下矿井中潜在爆炸性环境的设备和部件

This European Standard specifies the explosion protection requirements for the construction and marking of equipment that may be an individual item or form an assembly. This includes machinery and components placed on the market by a single supplier for use in mines susceptible to explosive atmospheres of firedamp and/or combustible dust (at atmospheric conditions as defined in EN 1127-2). NOTE 1 This European Standard deals only with the ignition protection of mining machinery and manufacturers will need to take account of all other relevant EU Directives relating to the construction of machines e.g. the consolidated Machinery Directive 98/37/EC D and Directive 2006/42/EC . Additionally, manufacturers will need to take account of any national legislation in the country where they intend to market their equipment. NOTE 2 Where the flammable gas in the atmosphere is not predominantly methane, reference will need to be made to 4.1 in either EN 60079-0:2004 or EN 13463-1:2001. NOTE 3 The definition of 'equipment' is contained in EN 13463-1. The definition of 'assembly' can be found the ATEX guidelines, published by the European Commission. Equipment complying with the relevant clauses of this European Standard is considered to meet the requirements for equipment of Group I - Category M2. This European Standard also deals with the prevention of ignitions of explosive atmospheres caused by burning (or smouldering) of combustible material such as fabric fibres, plastic "O"-rings, rubber seals, lubricating oils or greases used in the construction of the equipment if such items could be an ignition source. For example, the mechanical failure of rotating shaft bearings can result in frictional heating that ignites its plastic cage, plastic seal or lubricating grease. See also 5.2.4 of EN 13465-1:2001. NOTE 4 The above clause of EN 13463-1 requires the ignition hazard assessment to include those components which, if they failed, could ignite any flammable substance (e.g. lubricating oil) contained within the equipment and which could consequently become, or create, an ignition source. In the case of coal mining equipment and components, the ignition temperature of the mineral oils or greases used is often below that of firedamp, i.e. below 560 ~C.

Equipment and components intended for use in potentially explosive atmospheres in underground mines(includes Amendment A1:2008); English version of DIN EN 1710:2008-08

ICS: 73.100.30
CCS: K35;D92
发布: 2008-08
实施: 2008-08-01

LST EN 1710-2006+A1-2008 用于地下矿井潜在爆炸性环境的设备和部件

Equipment and components intended for use in potentially explosive atmospheres in underground mines

ICS: 73.100.30
CCS
发布: 2008-07-29
实施: 2008-07-29

NF S66-502:2008 地下矿井中潜在易爆环境用设备和组件

Equipment and components intended for use in potentially explosive atmospheres in underground mines.

ICS: 73.100.30
CCS: K35;D92
发布: 2008-06-01
实施: 2008-06-21

GSO ISO 723:2008 凿岩设备用于空心六角钻钢的锻造带箍柄和相应的卡盘衬套

This gulf standard specifies the dimensions of forged collared shanks for hollow hexagonal drill steels in bar form for rock drilling, which comply with GSO …../…… **. It also specifics the dimensions for the corresponding chuck bushings.

Rock drilling equipment – Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels