73.100.30 钻井和挖掘设备 标准查询与下载

JB/T 8433-2006 现场混装炸药车地面辅助设施

本标准规定了现场混装炸药车地面辅助设施产品的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本部分适用于现场混装炸药车地面辅助设施（以下简称地面站）。该地面站适用于现场混制乳化、重铵油和粒状铵油炸药车（以下简称装药车）。

Ground auxiliaries for site mixed and charged explosive truck

JB/T 8432.3-2006 现场混装乳化炸药车

JB/T 8432的本部分规定了现场混装乳化炸药车产品的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本部分适用于现场混装乳化炸药车（以下简称装药车）。该装药车主要用于冶金、煤炭、建材、有色、化工、水利等露天矿山采矿或工程爆破作业中向炮孔（特别适用于水孔）现场混制装填乳化炸药。

Site mixed and charged emulsion explosive truck

JB/T 8432.2-2006 现场混装粒状铵油炸药车

JB/T 8432的本部分规定了现场混装粒状铵油炸药车产品的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本部分适用于现场混装粒状铵油炸药车（以下简称装药车）。该装药车主要用于冶金、煤炭、建材、有色、化工、水利等露天矿山采矿或工程爆破作业中向干孔现场混制装填粒状铵油炸药。

Site mixed and charged ANFO explosive truck

KS E ISO 1718-2006(2016) 凿岩设备冲击钻用锥形连接钻杆

Rock drilling equipment－Drill rods with tapered connection for percussive drilling

KS E ISO 1718-2006(2021) 凿岩设备－冲击钻进用锥形连接钻杆

Rock drilling equipment－Drill rods with tapered connection for percussive drilling

KS E ISO 722-2006(2016) 凿岩设备六角形和圆形条形空心钻钢

Rock drilling equipment－Hollow drill steels in bar form, hexagonal and round

KS E ISO 722:2006 凿岩钎具.六角形与圆形中空钎钢.棒材

이 규격은 착암기에 사용되는 막대형으로 이루어진 육각형 및 둥근형 드릴 강철의 치수에 대해

Rock drilling equipment－Hollow drill steels in bar form, hexagonal and round

KS E ISO 1718:2006 凿岩钎具.冲击凿岩锥形连接钻杆和可拆式钻头

이 규격은 충격 드릴링용 테이퍼 연결형 드릴봉의 기준 치수와 테이퍼 연결의 요구 치수에 대

Rock drilling equipment－Drill rods with tapered connection for percussive drilling

PD EN 14035-21-2005 焰火.第21部分:地面弹跳螺旋焰火.规范和试验方法

This European Standard specifies requirements for the construction, performance, primary packaging and labelling of jumping ground spinners and the corresponding test methods. It is applicable to fireworks which are classified as jumping ground spinners of category 2 in EN 14035-2. It is not applicable to jumping ground spinners containing any report charge. It is not applicable to jumping ground spinners containing pyrotechnic composition that includes any of the following substances: — arsenic or arsenic compounds; — mixtures containing a mass fraction of chlorates greater than 80 %; — mixtures of chlorates with metals; — mixtures of chlorates with red phosphorus; — mixtures of chlorates with potassium hexacyanoferrate(II); — mixtures of chlorates with sulfur; — mixtures of chlorates with sulfides; — lead or lead compounds; — mercury compounds; — white phosphorus; — picrates or picric acid; — potassium chlorate with a mass fraction of bromates greater than 0,15 %; — sulfur with an acidity, expressed as mass fraction of sulfuric acid, greater than 0,002 %; — zirconium with a particle size of less than 40 μm. NOTE In EN 14035-2, jumping ground spinners are classified as follows: — brief description: non-metallic tubes containing gas- and sparks-producing pyrotechnic composition, with or without an aural pyrotechnic composition; — principal effects: rotation on the ground frequently interrupted by a jumping motion and emission of sparks and flames with or without whistling effect. Schemes for type testing of jumping ground spinners and batch testing of jumping ground spinners are specified in Annex A and Annex B respectively.

Fireworks — Part 21: Jumping ground spinners — Specification and test methods

GOST R 52443-2005 气动凿岩机.一般技术要求

Pneumatic rock drills. General technical requirements

GOST R 52442-2005 气动套筒式凿岩机.一般技术要求

Pneumatic stopper drills. General technical requirements

DIN 22261-1:2004 褐煤露天矿中的挖掘机、抛煤机和附属装置.第1部分:建造、投产和监测

Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 1: Construction, commissioning and monitoring

KS E 3104-2004(2009) 罗德凿岩机

Rock drill rods

JB/T 5501-2004 地下铲运机 试验方法

　　本标准规定了地下铲运机的试验准备要求、整机性能试验方法、工业性试验方法、样机解体检查及其试验报告内容。 　　本标准适用于地下铲运机的型式试验、出厂试验及工业性试验。

Underground L.H.D - Test method

JB/T 6122-2004 破岩滚刀

本标准规定了破岩滚刀的型式、基本参数、技术要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于竖井钻机、工程钻机及隧道掘进机用滚刀。该滚刀主要用于钻凿矿山、军工、桥梁、水电站、港口、地质和城建等工程中的竖井、基桩孔及隧道。

Shaft drilling cutters

ASTM D4916-04 机械钻抽样的标准实施规范

1.1 This practice describes procedures for the collection of an increment, partial sample, or gross sample of material using mechanical augers. Reduction and division of the material by mechanical equipment at the auger is also covered. Further manual or mechanical reduction or division of the material elsewhere shall be performed in accordance with Method D 2013.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Mechanical Auger Sampling

GOST R 52218-2004 凿井绞车.一般技术要求和测试方法

Shaft sinking winches. General technical requirements and test methods

LST EN 1552-2003 地下采矿机 工作面移动式采掘机 采煤机装载机和犁系统的安全要求

Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems

KS E ISO 10097-1-2003(2018) 钢丝绳金刚石岩心钻探设备A系统第1部分:公制单位

Wireline diamond core drilling equipment－System A－Part 1：Metric units

KS E ISO 10097-1:2003 钢丝绳钻石芯钻孔设备.A系统.第1部分:米制单位

이 규격은 지름 27~63 mm까지의 항복 코어(yielding cores), 지름 4

Wireline diamond core drilling equipment－System A－Part 1：Metric units