75.040 原油 标准查询与下载

BS EN ISO 9029:1997 石油及其产品的试验方法 原油 水的测定 蒸馏法

Identical with IP 358/97.

Methods of test for petroleum and its products. Crude petroleum. Determination of water. Distillation method

DS/EN ISO 9029:1996 原油 水分的测定 蒸馏法

This standard specifies a method for determining water in crude oil by distillation. The precision data have only been determined for water contents up to 1 % (V/V).

Crude petroleum - Determination of water - Distillation method

STAS SR ISO 9029:1995 原油．水蒸馏法的测定

Crude petroleum - Determination of water -Distillation method

DIN EN ISO 9029:1995 原油.水分测定.蒸馏法 (ISO 9029:1990); 德文版本 EN ISO 9029:1995

The document specifies a method for determining water in crude oil by distillation. The precision data have only been determined for water contents up to 1 % (V/V).

Crude petroleum - Determination of water - Distillation method (ISO 9029:1990); German version EN ISO 9029:1995

EN ISO 9029:1995 原油 水分的测定 蒸馏法

The precision data of this procedure have only been determined for water contents up to 1 % (V/V). Includes principle, apparatus, solvent, calibration and recovery test, sampling, procedure, expression of results, precision and test report. The distillation apparatus is shown in figures 1 and 2. The precision of the method is shown in figure 3. The sample handling is described in annex A.

Crude petroleum - Determination of water - Distillation method (ISO 9029:1990)

DL/T 567.9-1995 燃油元素分析

Ultimate Analysis of Liquid Fuel

DL/T 567.8-1995 燃油发热量的测定

Test Methods for Clorific Value of Liquid Fuel

DL/T 568-1995 燃料元素的快速分析方法(高温燃烧红外热导法)

Fast test methods for ultimate analysis of fuel by infrared absorption & thermal conductivity

ASTM D5661-95(2001) PKP法测试石油相对溶解能力标准试验方法

PKP values indicate high aromatic or high naphthenic content, or both, which contributes to high relative solvency of the oil.1.1 This test method covers a procedure for determining the relative solvency of petroleum oils used in ink formulations by a pentaerythritol ester of resin acids (PKP) titration. 1.2 This test method is applicable to petroleum oils that have an initial boiling point over 90oC and a dry point under 500oC as determined by Method D86. 1.3 This test method, along with viscosity measurements as determined by Test Method D445, is used to ensure the compositional consistency of petroleum oils. It can also differentiate between hydrotreated and non-hydrotreated oils that have the same viscosity. 1.4 This test method includes the use of a U.S. Occupational Safety and Health Administration (OSHA)-designated flammable chemical, pentane. Consult the suppliers'' material safety data sheet for specific hazard information and guidance relative to use. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in 1.3.

Standard Test Method for Relative Solvency of Petroleum Oils by the PKP Method

GOST R 50802-1995 石油.硫化氢,甲基与乙基硫醇的测定方法

Настоящий стандарт распространяется на меркаптансодержащие стабилизированные товарные нефти и устанавливает метод определения массово

Petroleum. Method for determination of hydrogen sulfide, methyl- and ethylmercaptans

GOST R 50442-1992 石油及石油制品.测定含硫量的X-射线荧光法

Настоящий стандарт устанавливает метод определения массовой доли серы в нефтях и нефтепродуктах в диапазоне 0,05 - 5,0%. Сущность метода закл

Petroleum and petroleum products. X-ray fluorescence method for determination of sulphur content

ISO 9029:1990 原油 水分的测定 蒸馏法

The precision data of this procedure have only been determined for water contents up to 1 % (V/V). Includes principle, apparatus, solvent, calibration and recovery test, sampling, procedure, expression of results, precision and test report. The distillation apparatus is shown in figures 1 and 2. The precision of the method is shown in figure 3. The sample handling is described in annex A.

Crude petroleum; determination of water; distillation method

ISO 9030:1990 原油 水和沉淀物含量的测定 离心法

Specifies a method for the laboratory determination. The precision data of this procedure have only been determined for water contents up to 1 % (V/V). Includes principle, apparatus, reagents, sampling, procedure, expression of results, precision and test report. A centrifuge tube is shown in figure 1. The procedure for reading the volume of water and sediment is shown in figure 2. The precision of the method is shown in figure 3. The sample handling is described in annex A.

Crude petroleum; determination of water and sediment; centrifuge method

JIS K 2601:1990 原油试验方法

Testing methods for crude petroleum

GSO 129:1990 原油和石油产品的测试方法 石油产品中灰分的测定

This standard is concerned with the method of determination of ash from distillate and residual fuels, crude oils, lubricating oils, waxes and other petroleum products in which any ash-forming materials present are normally considered to be undesirable impurities or contaminants (Note 1). The method is limited to petroleum products which are free from added ash-forming additives, including certain phosphorus compounds (Note 2). NOTE: 1 In certain types of samples, all of the ash-forming metals may not be retained quantitatively in the ash. This is particularly true for distillate oils, which require a special ash procedure in order to retain metals quantitatively. NOTE: 2 This method is not intended for the analysis of unused lubricating oils containing additives; for such samples use Gulf Standard GS 130 “Determination of Sulfated Ash from Lubricating Oils and Additives”, neither is it intended for the analysis of lubricating oils containing lead nor for used engine crank case oils.

METHODS OF TESTING FOR CRUDE PETROLEUM AND PETROLEUM PRODUCTS – DETERMINATION OF ASH FROM PETROLEUM PRODUCTS

GSO 128:1990 原油和石油产品的测试方法 石油产品和沥青材料中水的测定（蒸馏法）

1.1 This Gulf standard is concerned with the method of determination of water in petroleum products, tars and products derived from this material. 1.2 The specific products listed in Table 1 are the materials considered in developing the details of this standard. 1.3 This test is not concerned with the determination of water in bituminous and asphalt emulsions and crude petroleum.

METHODS OF TESTING FOR CRUDE PETROLEUM AND PETROLEUM PRODUCTS – DETERMINATION OF WATER IN PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS (DISTILLATION METHOD)

GSO 127:1990 原油和石油产品的测试方法 用比重计法测定原油和液体石油产品的密度、相对密度和 API 比重

This standard is concerned with the method for the determination of density, relative density (specific gravity) and API gravity of crude petroleum, petroleum, products, or mixtures of petroleum and non-petroleum products normally handled as liquids, and having a Reid vapour pressure of 179 kPa or less. Values are measured on a hydrometer at convenient temperatures, reading of density being reduced to 15oC, and readings of relative density (specific gravity) and API gravity to 15.5oC, by means of standard tables.

METHODS OF TESTING FOR CRUDE PETROLEUM AND PETROLEUM PRODUCTS – DETERMINATION OF DENSITY, RELATIVE DENSITY AND API GRAVITY OF CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS BY HYDROMETER METHOD

BOCA ARTICLE 30 NFPC-1990 液化石油气体.第8版

The provisions requiring that the excavation left when an unfit structure has been removed be filled in is an obvious, but often neglected means of protecting the public health and safety.

Liquefied Petroleum Gases Eighth Edition

BOCA ARTICLE 30 NFPC COMM-1990 液化石油气体

APPENDIX A SYSTEM LAYOUT ILLUSTRATIONS

Liquefied Petroleum Gases

BOCA ARTICLE 16 NFPC-1990 石油和天然气生产.第8版

Each of the BOCA National Codes is completely updated and published in a new edition every three years. Code change activity is conducted annually within each three-year edition cycle. The first and second year’s approved changes are published in supple

Oil and Gas Production Eighth Edition