75.160.20 液体燃料 标准查询与下载
共找到 3194 条与 液体燃料 相关的标准，共 213 页
本标准适用于高温炼焦回收所得到的粗苯及经过洗涤、分馏所制得的苯类产品；高温煤焦油加工所得到的粗酚及经分馏所制得的酚类产品；高温炼焦回收所得到的稀氨水及经加工制得的浓氨水；高温炼焦回收所得到的轻粗吡啶及经分馏制得的吡啶类产品等的试样采取。
Sampling method for light oils of coking products
- ICS
- 75.160.20
- CCS
- G18
- 发布
- 1980-08-15
- 实施
- 1981-05-01
本标准适用于按国家规定的鉴定程序通过的试样所采用的原料和工艺生产的活塞式航空发动机燃料。根据辛烷值不同分为75号、95号和100号三种。其代号分别为RH-75、RH-95/130、RH-100/130。
Aviation gasoline
- ICS
- 75.160.20
- CCS
- E31
- 发布
- 1979-11-23
- 实施
- 1980-07-01
本标准适用于天然原油加工制得的喷气燃料，本产品是按国家规定之鉴定程序通过的试样所采用的原料和生产工艺进行生产的，其代号为RP-2。 本产品允许单独或复合加入各种有利于提高或改进喷气燃料质量的添加剂，加入量和类型根据具体情况另外规定。
Jet fuel No.2
- ICS
- 75.160.20
- CCS
- E31
- 发布
- 1979-11-23
- 实施
- 1980-07-01
本方法系用沸腾的乙醇抽出试样中的有机酸，然后用氢氧化钾乙醇溶液进行滴定。中和100毫升石油产品所需氢氧化钾的毫克数称为酸度。本方法适用于测定未加乙基液的汽油、煤油和柴油的酸度。
Determination of acidity of gasoline,kerosene and diesel fuels
- ICS
- 75.160.20
- CCS
- E31
- 发布
- 1977-11-08
- 实施
- 1978-01-01
本方法适用于测定发动机燃料中硫醇性硫的含量。测定方法系基于以氨FG 硫酸铜溶液与燃料中的硫 醇相互作用而形成铜的硫醇化合物。
Determination of mercaptan-sulfur in engine fuels(ammonia-copper sulfate method)
- ICS
- 75.160.20
- CCS
- E31
- 发布
- 1965-01-20
- 实施
- 1965-10-01
本方法适用于测定汽油中的四乙基铅含量。测定的手续是用盐酸分解乙基液汽油中的四乙基铅，然后用重铬酸钾沉淀所得的铅，将所得的沉淀溶于铬酸铅溶剂中，最后用硫代硫酸钠溶液进行滴定。
Determinations of tetra-ethyl lead content in gasoline(chromate method)
- ICS
- 75.160.20
- CCS
- E31
- 发布
- 1964-10-24
- 实施
- 1965-07-01
本方法适用于检查发动机燃料中的活性硫化物或游离硫对铜片腐蚀所生成的颜色变化。
Test for copper strip corrosion of engine fuels
- ICS
- 75.160.20
- CCS
- E31
- 发布
- 1964-10-24
- 实施
- 1965-07-01
发动机燃料在雷德式饱和蒸气压测定器中与燃料蒸气的体积比为1：4以及在38℃时所测出的燃料蒸气最大压力，称为雷德饱和蒸气压。 雷德饱和蒸气压适用于评定发动机燃料的蒸发强度、起动性能、生成气阻的倾向和在运输保管时损失轻质馏分的倾向。
Determination of saturated vapor pressure of engine fuels(Reid method)
- ICS
- 75.160.20
- CCS
- E31
- 发布
- 1964-04-04
- 实施
- 1964-10-01
汽油在压力为7公斤/厘米2的氧气中以及在温度为100℃时未被氧化所经过的时间，称为诱导期。 诱导期适用于评定汽油在贮存期间产生氧化和形成胶质的倾向。
Determination of induction period of automobile gasoline
- ICS
- 75.160.20
- CCS
- E31
- 发布
- 1964-04-04
- 实施
- 1964-10-01
Light Oil Safety Static Conductivity
- ICS
- 75.160.20
- CCS
- C66
- 发布
- 实施
- 2008-03-01
本文件规定了汽油辛烷值试验机检查维修的内容，包括每次开机检查和维护保养内容，以及中短期、长期和超长期的检查维修内容。
Technical specification for the services of gasoline octane number machines
- ICS
- 75.160.20
- CCS
- C401
- 发布
- 2024-06-06
- 实施
- 2024-06-06
本文件规定了柴油十六烷值试验机检查维修的内容，包括每次开机检查和维护保养内容，以及中短期、长期和超长期的检查维修内容。
Technical specification for the services of diesel cetane number machines
- ICS
- 75.160.20
- CCS
- C401
- 发布
- 2024-06-06
- 实施
- 2024-06-06
1 Scope This document defines the detailed classification of marine fuels within class F (fuels). It is intended to be read in conjunction with ISO 8216‑99. NOTE Class F for fuels was originally defined as part of the method of classification for petroleum products given in ISO 8681.
Products from petroleum, synthetic and renewable sources. Fuels (class F) classification - Categories of marine fuels
- ICS
- 75.160.20
- CCS
- 发布
- 2024-05-31
- 实施
- 2024-05-31
1 Scope This document in its entirety defines the general requirements and specifications for fuels used in marine diesel engines and boilers, prior to onboard fuel handling (storage, settling, centrifuging, filtration, heating) before use. For the purposes of this document, the term “fuels” comprises of the following: — hydrocarbons from petroleum crude oil, oil sands and shale oil; — synthetic hydrocarbons , renewable hydrocarbons or hydrocarbons from recycled sources, with molecular structures that are indistinguishable from petroleum hydrocarbons; — fatty acid methyl ester ( FAME ), where permitted as specified in this document; — blends of any of the above, where permitted as specified in this document. The general requirements and specifications for fuels in this document can also be applied to fuels used in stationary diesel engines of the same or similar type as those used for marine purposes. This document specifies seven categories of distillate fuels, one of which is for diesel engines used for emergency purposes. It also specifies four categories of residual fuels for sulfur content at or below 0,50 % by mass, five ca...
Products from petroleum, synthetic and renewable sources. Fuels (class F). Specifications of marine fuels
- ICS
- 75.160.20
- CCS
- 发布
- 2024-05-31
- 实施
- 2024-05-31
Products from petroleum, synthetic and renewable sources — Fuels (class F) — Specifications of marine fuels
- ICS
- 75.160.20
- CCS
- 发布
- 2024-05-30
- 实施
Standard Test Method for Burning Quality of Kerosene
- ICS
- 75.160.20
- CCS
- 发布
- 2024-05-01
- 实施
Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
- ICS
- 75.160.20
- CCS
- 发布
- 2024-05-01
- 实施
Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
- ICS
- 75.160.20
- CCS
- 发布
- 2024-05-01
- 实施
Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
- ICS
- 75.160.20
- CCS
- 发布
- 2024-05-01
- 实施
