75.180.10 勘探和钻采设备 标准查询与下载

T/CPI 13004-2023 石油钻机和修井机定期检验 推荐做法

本文件规定了石油钻机和修井机检验管理、检验周期、检验内容和检验方式。 本文件适用于GB/T 23505中定义的陆地石油钻机和修井机。 本文件不适用于带压作业机、连续油管修井机。

Recommended practices for periodic inspection of oil drilling rigs and workover rigs

T/CPI 13002-2023 石油天然气钻采设备 可溶桥塞性能指标和检测规范

本文件规定了可溶桥塞的术语和定义、产品型号表示方法、性能指标、技术要求及检测规范。 本文件适用于可溶桥塞的设计、制造及室内性能检测。

Performance indicators and testing specifications of soluble bridge plugs for oil and gas drilling equipment

T/CPI 11023-2023 钻柱转换接头

本文件规定了钻柱转换接头的型式、规格、结构和工艺、材料要求、检验和试验、标志、包装等要求。 本文件适用于石油、天然气钻井、修井以及非开挖作业中连接钻柱构件的转换接头。

Drill string adapter

T/CPI 11022-2023 石油天然气用水下井口装置

本文件规定了石油天然气用水下井口装置的产品设计、材料及焊接要求、工厂试验、装置标识、防护及运输等内容。 本文件适用于额定工作压力不超过103.5MPa且额定工作温度不高于177℃的水下井口装置。

Oil and gas underwater wellhead equipment

T/CPI 11018-2023 石油天然气钻采设备 自动化连续管作业机

本文件规定了石油天然气钻采设备自动化连续管作业机的型式、型号、基本参数、配置要求、技术要求、试验和检验等要求。 本文件适用于石油天然气钻采设备自动化连续管作业机的设计、制造和验收。

Oil and gas drilling equipment automated coiled tubing operating machine

T/CPI 11020-2023 特种合金防腐抽油杆

本文件规定了特种合金防腐抽油杆的术语和定义、型式和型号表示方法、技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本文件适用于特种合金防腐抽油杆的设计、制造及检验。

Special alloy anti-corrosion sucker rod

T/CPI 11017-2023 无绷绳修井机

本文件规定了无绷绳修井机的术语和定义、型式和型号、基本参数、配置、要求、试验规则、标志、出厂文件、包装、运输和贮存、使用与维护。 本文件适用于无绷绳修井机的设计、制造、验收。

Tielineless workover rig

T/CPI 11019-2023 石油天然气钻采设备 全金属单螺杆抽油泵

本文件规定了全金属单螺杆抽油泵的分类和型号表示方法、选型信息、设计要求、质量控制、性能试验、检验规则、标志、包装、运输、搬运及储存。 本文件适用于人工举升用全金属单螺杆抽油泵，其它场合用全金属单螺杆抽油泵也可以参照执行。

Oil and gas drilling equipment all-metal single screw pump

SY/T 7692-2023 石油天然气钻采设备 海洋钻井隔水管检验、修理与再制造

Oil and gas drilling equipment offshore drilling riser inspection, repair and remanufacturing

SY/T 7693-2023 石油天然气钻采设备 防喷器胶芯

Blowout preventer rubber core for oil and gas drilling equipment

SY/T 6841-2023 电法勘探时频电磁仪

Electrical exploration time-frequency electromagnetic instrument

SY/T 7691-2023 盐穴型储气库地面工程设计规范

Design specifications for ground engineering of salt cavern type gas storage

SY/T 7685-2023 陆地节点地震仪

land node seismometer

SY/T 7694-2023 石油天然气钻采设备 井口装置和采油树的修理和再制造

Repair and remanufacturing of oil and gas drilling equipment wellheads and Christmas trees

SY/T 5585-2023 地震勘探电缆

seismic survey cable

GSO ISO 19901-8:2023 石油和天然气工业 海上结构物的特殊要求 第8部分：海洋土壤调查

ISO 19901-8:2014 specifies requirements, and provides recommendations and guidelines for marine soil investigations regarding: a) objectives, planning and execution of marine soil investigations; b) deployment of investigation equipment; c) drilling and logging; d) in situ testing; e) sampling; f) laboratory testing; and g) reporting. Rock materials are only covered by ISO 19901-8:2014 to the extent that ordinary marine soil investigation tools can be used, e.g. for chalk, calcareous soils, cemented soils or similar soft rock. ISO 19901-8:2014 is intended for clients, soil investigation contractors, designers, installation contractors, geotechnical laboratories and public and regulatory authorities concerned with marine soil investigations for any type of offshore and nearshore structures, or geohazard assessment studies, for petroleum and natural gas industries.

Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil investigations

GSO ISO 11960:2023 石油和天然气工业 用作井套管或油管的钢管

This document specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material. By agreement between the purchaser and manufacturer, this document can also be applied to other plain-end pipe sizes and wall thicknesses. This document is applicable to the following connections: — short round thread casing (SC); — long round thread casing (LC); — buttress thread casing (BC); — non-upset tubing (NU); — external upset tubing (EU); — integral-joint tubing (IJ). NOTE 1 For further information, see API Spec 5B. For such connections, this document specifies the technical delivery conditions for couplings and thread protection. NOTE 2 Supplementary requirements that can optionally be agreed for enhanced leak resistance connections (LC) are given in A.9 SR22. This document can also be applied to tubulars with connections not covered by ISO or API standards. This document is applicable to products including the following grades of pipe: H40, J55, K55, N80, L80, C90, R95, T95, P110, C110 and Q125. This document is not applicable to threading requirements. NOTE 3 Dimensional requirements on threads and thread gauges, stipulations on gauging practice, gauge specifications, as well as, instruments and methods for inspection of threads are given in API Spec 5B.

Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells

GSO ISO 19901-10:2023 石油和天然气工业 海上结构物的特殊要求 第10部分：海洋地球物理调查

This document provides requirements and guidelines for marine geophysical investigations. It is applicable to operators/end users, contractors and public and regulatory authorities concerned with marine site investigations for offshore structures for petroleum and natural gas industries. This document provides requirements, specifications, and guidance for: a) objectives, planning, and quality management; b) positioning; c) seafloor mapping, including instrumentation and acquisition parameters, acquisition methods, and deliverables; d) sub-seafloor mapping, including seismic instrumentation and acquisition parameters, and non-seismic-reflection methods; e) reporting; f) data integration, interpretation, and investigation of geohazards. This document is applicable to investigation of the seafloor and the sub-seafloor, from shallow coastal waters to water depths of 3 000 m and more. It provides guidance for the integration of the results from marine soil investigations and marine geophysical investigations with other relevant datasets. NOTE 1 The depth of interest for sub-seafloor mapping depends on the objectives of the investigation. For offshore construction, the depths of investigation are typically in the range 1 m below seafloor to 200 m below seafloor. Some methods for sub-seafloor mapping can also achieve much greater investigation depths, for example for assessing geohazards for hydrocarbon well drilling. There is a fundamental difference between seafloor mapping and sub-seafloor mapping: seafloor signal resolution can be specified, while sub-seafloor signal resolution and penetration cannot. This document therefore contains requirements for the use of certain techniques for certain types of seafloor mapping and sub-seafloor mapping (similarly, requirements are given for certain aspects of data processing). If other techniques can be shown to obtain the same information, with the same or better resolution and accuracy, then those techniques may be used. Mapping of pre-drilling well-site geohazards beneath the seafloor is part of the scope of this document. NOTE 2 This implies depths of investigation that are typically 200 m below the first pressure-containment casing string or 1 000 m below the seafloor, whichever is greatest. Mapping of pre-drilling well-site geohazards is therefore the deepest type of investigation covered by this document. In this document, positioning information relates only to the positioning of survey platforms, sources and receivers. The processes used to determine positions of seafloor and sub-seafloor data points are not covered in this document. Guidance only is given in this document for the use of marine shear waves (A.8.3.3), marine surface waves (A.8.3.4), electrical resistivity imaging (A.8.3.5) and electromagnetic imaging (A.8.3.6).

Petroleum and natural gas industries — Specific requirements for offshore structures — Part 10: Marine geophysical investigations

GSO ISO 19901-9:2023 石油和天然气工业 海上结构物的特殊要求 第9部分：结构完整性管理

This document specifies principles for the structural integrity management (SIM) of offshore structures subjected to known or foreseeable types of actions. This document specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries: — caissons, free-standing and braced; — jackets; — monotowers; — towers. This document is applicable to topsides, including but not limited to the main decks, deck legs, topsides modules, crane pedestals, helideck, drilling derrick, skid beams, flare booms, exhaust towers, radio tower, conductor support frames, and lifeboat davits. In addition, it is applicable to compliant bottom founded structures, steel gravity structures, jack-ups, other bottom founded structures and other structures related to offshore structures (e.g. underwater oil storage tanks, bridges and connecting structures), to the extent to which its requirements are relevant. This document contains requirements for planning and engineering of the following tasks: a) integrity management data requirements; b) in-service inspection and integrity management of both new and existing structures; c) assessment of existing structures; d) evaluation of structures for reuse at different locations; e) evaluation of structures for their future removal.

Petroleum and natural gas industries — Specific requirements for offshore structures — Part 9: Structural integrity management

T/SXBX 001-2023 生产测井四参数组合测井仪

6 技术要求

Production logging four-parameter combination logging tool