共找到 1960 条与 勘探和钻采设备 相关的标准,共 131 页
1 范围 本文件规定了油管质量分级的评价程序和要求、评价方法、质量分级等内容。 本文件适用于油管的质量分级评价活动。 2 规范性引用文件 下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件,仅注日期的版本适用于本文件。凡是不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。 GB/T 21267 石油天然气工业 套管及油管螺纹连接试验程序 T/CAS ES000000001—2022(V01) 工业品质量分级评价规则 通则 API Spec 5B 套管、油管和管线管螺纹的加工、测量和检验 API Spec 5CT 套管和油管 ASTM A370 钢制品力学性能试验的标准试验方法和定义 ASTM A751 钢产品化学分析的试验方法、规程和术语 ASTM E23 金属材料缺口冲击测试的标准试验方法 ASTM E112 测定平均粒径的标准试验方法
Rules for quality grading and evaluating of industrial products—Tubing
1 范围 本文件规定了抽油杆中PE包覆抽油杆质量分级的评价程序和要求、评价方法、质量分级等内容。 本文件适用于PE包覆抽油杆(包括PE半包覆抽油杆、异型接头PE全包覆抽油杆)质量分级评价活动。 2 规范性引用文件 下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中,注日期的引用文件,仅该日期对应的版本适用于本文件;不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。 GB/T 228.1 金属材料 拉伸试验 第1部分:室温试验方法 GB/T 230.1 金属材料 洛氏硬度试验 第1部分:试验方法 GB/T 1033.1 塑料 非泡沫塑料密度的测定 第1部分:浸渍法、液体比重瓶法和滴定法 GB/T 1633 热塑性塑料维卡软化温度(VST)的测定 GB/T 2411 塑料和硬橡胶 使用硬度计测定压痕硬度(邵氏硬度) GB/T 3960 塑料 滑动摩擦磨损试验方法 GB/T 4340.1 金属材料 维氏硬度试验 第1部分:试验方法 GB/T 6461 金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级 GB/T 6462 金属和氧化物覆盖层 厚度测量 显微镜法 GB/T 6671 热塑性塑料管材 纵向回缩率的测定(包含修改单1) GB/T 8804.3 热塑性塑料管材 拉伸性能测定 第3部分:聚烯烃管材 GB/T 10125 人造气氛腐蚀试验 盐雾试验 GB/T 11170 不锈钢 多元素含量的测定 火花放电原子发射光谱法(常规法) SY/T 5029—2013 抽油杆 SY/T 6662.1—2012 石油天然气工业用非金属复合管 第1部分:钢骨架增强聚乙烯复合管 T/CAS ES000000001—2022(V01) 工业品质量分级评价规则 通则
Rules for quality grading and evaluating of industrial products—Sucker rods—PE coated sucker rods
1 范围 本文件规定了铁钻工质量分级的评价程序和要求、评价方法、质量分级等内容。 本文件适用于铁钻工质量分级评价活动。 2 规范性引用文件 下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中,注日期的引用文件,仅该日期对应的版本适用于本文件;不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。 GB/T 8423.5 石油天然气工业术语 第5部分:设备与材料 GB/T 9286 色漆和清漆 划格试验 SY/T 5074 钻井和修井用动力钳、吊钳 SY/T 7421 石油天然气钻采设备 钻井和修井用管柱自动化处理系统 T/CAS ES000000001—2022(V01) 工业品质量分级评价规则 通则
Rules for quality grading and evaluating of industrial products—Iron roughneck
1 范围 本文件规定了动力猫道(自动甩钻杆装置、管杆自动运输机)质量分级的评价程序和要求、评价方法、质量分级等内容。 本文件适用于动力猫道(自动甩钻杆装置、管杆自动运输机)质量分级评价活动。 2 规范性引用文件 下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中,注日期的引用文件,仅该日期对应的版本适用于本文件;不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。 GB/T 8423.5 石油天然气工业术语 第5部分:设备与材料 GB/T 9286 色漆和清漆 划格试验 SY/T 7421 石油天然气钻采设备 钻井和修井用管柱自动化处理系统 T/CAS ES000000001—2022(V01) 工业品质量分级评价规则 通则
Rules for quality grading and evaluating of industrial products—Power catwalk(automatic chucking device for drill pipe、automatic pipe and rod conveyer)
BS EN ISO 13702. Petroleum and natural gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines
Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels
Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels
Drill string shock absorbers and hydraulic thrusters for oil and gas drilling equipment
Technical regulations for onshore multi-wave multi-component seismic data interpretation
Structural steel forgings for offshore oil and gas drilling equipment
Technical regulations for electromagnetic exploration in wells
Oil and gas drilling equipment combination pump barrel type oil pump
Technical regulations for collecting longitudinal wave seismic data on land
Carbon steel, alloy steel, stainless steel and nickel-based alloy castings for the oil and gas industry
Technical specifications for the use of vibrator
Specification for performance testing and evaluation of simulated geophones
Oil and gas drilling equipment submersible electric screw pump unit
Technical regulations for seabed seismic exploration data processing
Centrifugal turbine torque converter for oil and gas drilling equipment
1.1 This practice describes the features and processes that should be included in an oil-spill trajectory and fate model. 1.2 This practice applies only to oil-spill models and does not consider the broader need for models in other fields. This practice considers only computer-based models, and not physical modeling of oil-spill processes. 1.3 This practice is applicable to all types of oil in oceans, lakes, and rivers under a variety of environmental and geographical conditions. 1.4 This practice applies primarily to two-dimensional models. Consideration is given to three-dimensional models for complex flow regimes. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Practice for Development and Use of Oil-Spill Trajectory Models
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号