75.180.10 勘探和钻采设备 标准查询与下载

GSO ISO 10855-2:2022 海上集装箱和相关起重装置 第2部分：起重装置的设计、制造和标记

This document specifies requirements for lifting sets for use with containers in offshore service, including technical requirements, marking and statements of conformity for single and multi-leg slings, including chain slings and wire rope slings.

Offshore containers and associated lifting sets — Part 2: Design, manufacture and marking of lifting sets

GSO ISO 10855-3:2022 海上集装箱和相关起重设备 第3部分：定期检查、检查和测试

This document specifies requirements for the periodic inspection, examination and testing of offshore freight and service containers, built in accordance with ISO 10855‑1, with maximum a gross mass not exceeding 25 000 kg and their associated lifting sets, intended for repeated use to, from and between offshore installations and ships. Inspection requirements following damage and repair of offshore containers are also included. Recommended knowledge and experience of staff responsible for inspection of offshore containers is given in Annex B. Recommended knowledge and experience of staff responsible for inspection of lifting sets intended for use with offshore containers is given in Annex C.

Offshore containers and associated lifting sets — Part 3: Periodic inspection, examination and testing

GSO ISO 10855-1:2022 近海集装箱和相关起重装置 第1部分：近海集装箱的设计、制造和标记

This document specifies requirements for the design, manufacture and marking of offshore containers with a maximum gross mass not exceeding 25 000 kg, intended for repeated use to, from and between offshore installations and ships. This document specifies only transport-related requirements.

Offshore containers and associated lifting sets — Part 1: Design, manufacture and marking of offshore containers

GSO ISO 15546:2022 石油天然气行业—铝合金钻杆

ISO 15546:2011 specifies the technical delivery conditions, manufacturing process, material requirements, configuration and dimensions, and verification and inspection procedures for aluminium alloy drill pipes with or without attached steel tool joints, for use in drilling and production operations in the petroleum and natural gas industries. A typical drill pipe configuration is provided, showing main elements and lengths. The main dimensions and masses of the grades of drill pipe are given in both SI units and USC units. ISO 15546:2011 does not consider performance properties.

Petroleum and natural gas industries — Aluminium alloy drill pipe

ISO 24200:2022 石油、石化和天然气工业.海上项目用散装材料.管支架

This document specifies the requirements for design including shape and dimensions, material as well as strength for pipe support. Applicable pipe size range varies depending on support types. This document covers topside systems for fixed or floating offshore oil and gas projects. This document is applicable to design temperature of support within the range between –46 °C up to 200 °C. This document is limited to metallic pipes, covering the following pipe supports: — clamped shoe; — welded shoe; — U-bolt; — U-strap; — bracing for branch connection; — trunnion and stanchion; — guide support (guide, hold-down, guide and hold-down, line stop).

Petroleum, petrochemical and natural gas industries — Bulk material for offshore projects — Pipe support

T/ZAS 2005-2022 直推式双侧向测井仪

本文件规定了直推式双侧向测井仪的要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于不同温度和压力等级的直推式双侧向测井仪的设计、制造、检验和质量评价。

Pipe conveyance dual lateralog logging tool

T/CAS ES200912001-2022 工业品质量分级评价规则 石油专用设备 井口装置和采油树

1　范围 本文件规定了井口装置和采油树质量分级的评价程序和要求、评价方法、质量分级等内容。 本文件适用于陆上石油天然气油气井井口装置和采油树（包括油管头总成、采油树等）质量分级评价活动。 2　规范性引用文件 下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件，仅注日期的版本适用于本文件。凡是不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。 GB/T 22513 石油天然气工业 钻井和采油设备 井口装置和采油树 T/CAS ES000000001—2022（V01） 工业品质量分级评价规则 通则

Rules for quality grading and evaluating of industrial products—Wellhead and christmas tree equipment

BS EN ISO 19901-5:2021 石油和天然气工业 海上结构的具体要求 体重管理

1   Scope This document specifies requirements for managing and controlling the weight and centre of gravity (CoG) of offshore facilities by means of mass management during all lifecycle phases including; conceptual design, front end engineering design (FEED), detail engineering, construction and operations. These can be new facilities (greenfield) or modifications to existing facilities (brownfield). Weight management is necessary throughout operations, decommissioning and removal to facilitate structural integrity management (SIM). The provisions of this document are applicable to fixed and floating facilities of all types. Weight management only includes items with static mass. Snow and ice loads are excluded as they are not considered to be part of the facility. Dynamic loads are addressed in ISO 19904-1, ISO 19901-6 and ISO 19901-7. This document specifies: a) requirements for managing and controlling weights and CoGs of assemblies and entire facilities; b) requirements for managing weight and CoG interfaces; c) standardized terminology for weight and CoG estimating and reporting; d) requirements for determining not-to-exceed (NTE) weights and budget weights; ...

Petroleum and natural gas industries. Specific requirements for offshore structures. Weight management

BS EN ISO 19901-10:2022 石油和天然气工业 海上结构物的具体要求 海洋地球物理调查

1   Scope This document provides requirements and guidelines for marine geophysical investigations . It is applicable to operators/end users, contractors and public and regulatory authorities concerned with marine site investigations for offshore structures for petroleum and natural gas industries. This document provides requirements, specifications, and guidance for: a) objectives, planning, and quality management; b) positioning ; c) seafloor mapping, including instrumentation and acquisition parameters, acquisition methods, and deliverables; d) sub-seafloor mapping, including seismic instrumentation and acquisition parameters, and non-seismic- reflection methods; e) reporting; f) data integration, interpretation, and investigation of geohazards . This document is applicable to investigation of the seafloor and the

Petroleum and natural gas industries. Specific requirements for offshore structures - Marine geophysical investigations

EN ISO 10423:2022 石油和天然气工业.钻井和开采设备.井口设施和采油树设备

This document specifies requirements and gives recommendations for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, and purchasing of wellhead and tree equipment for use in the petroleum and natural gas industries. This document does not apply to field use or field testing. This document does not apply to repair of wellhead and tree equipment except for weld repair in conjunction with manufacturing. This document does not apply to tools used for installation and service (e.g. running tools, test tools, wash tools, wear bushings, and lubricators). This document supplements API Spec 6A, 21st edition (2018), the requirements of which are applicable with the exceptions specified in this document.

Petroleum and natural gas industries - Drilling and production equipment - Wellhead and tree equipment (ISO 10423:2022)

ISO 10423:2022 石油和天然气工业.钻井和生产设备.井口和树木设备

This document specifies requirements and gives recommendations for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, and purchasing of wellhead and tree equipment for use in the petroleum and natural gas industries. This document does not apply to field use or field testing. This document does not apply to repair of wellhead and tree equipment except for weld repair in conjunction with manufacturing. This document does not apply to tools used for installation and service (e.g. running tools, test tools, wash tools, wear bushings, and lubricators). This document supplements API Spec 6A, 21st edition (2018), the requirements of which are applicable with the exceptions specified in this document.

Petroleum and natural gas industries — Drilling and production equipment — Wellhead and tree equipment

ISO/FDIS 13702:2022 石油和天然气工业 海上生产装置火灾和爆炸的控制和缓解 要求和指南

Oil and gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines

ISO/DIS 13628-1:2022 包括低碳能源在内的石油和天然气工业 海底生产系统的设计和运行 第 1 部分：一般要求和建议

Oil and gas industries including low carbon energy — Design and operation of subsea production systems — Part 1: General requirements and recommendations

22/30412638 DC BS EN ISO 19905-1 石油和天然气工业 移动式海上平台的现场评估 第 1 部分：自升式钻井平台

BS EN ISO 19905-1. Petroleum and natural gas industries. Site-specific assessment of mobile offshore units - Part 1. Jack-ups

EN ISO 19901-10:2022 石油和天然气工业.海上结构物的特殊要求.第10部分：海洋地球物理调查

This document provides requirements and guidelines for marine geophysical investigations. It is applicable to operators/end users, contractors and public and regulatory authorities concerned with marine site investigations for offshore structures for petroleum and natural gas industries. This document provides requirements, specifications, and guidance for: a) objectives, planning, and quality management; b) positioning; c) seafloor mapping, including instrumentation and acquisition parameters, acquisition methods, and deliverables; d) sub-seafloor mapping, including seismic instrumentation and acquisition parameters, and non-seismic-reflection methods; e) reporting; f) data integration, interpretation, and investigation of geohazards. This document is applicable to investigation of the seafloor and the sub-seafloor, from shallow coastal waters to water depths of 3 000 m and more. It provides guidance for the integration of the results from marine soil investigations and marine geophysical investigations with other relevant datasets. NOTE 1 The depth of interest for sub-seafloor mapping depends on the objectives of the investigation. For offshore construction, the depths of investigation are typically in the range 1 m below seafloor to 200 m below seafloor. Some methods for sub-seafloor mapping can also achieve much greater investigation depths, for example for assessing geohazards for hydrocarbon well drilling. There is a fundamental difference between seafloor mapping and sub-seafloor mapping: seafloor signal resolution can be specified, while sub-seafloor signal resolution and penetration cannot. This document therefore contains requirements for the use of certain techniques for certain types of seafloor mapping and sub-seafloor mapping (similarly, requirements are given for certain aspects of data processing). If other techniques can be shown to obtain the same information, with the same or better resolution and accuracy, then those techniques may be used. Mapping of pre-drilling well-site geohazards beneath the seafloor is part of the scope of this document. NOTE 2 This implies depths of investigation that are typically 200 m below the first pressure-containment casing string or 1 000 m below the seafloor, whichever is greatest. Mapping of pre-drilling well-site geohazards is therefore the deepest type of investigation covered by this document. In this document, positioning information relates only to the positioning of survey platforms, sources and receivers. The processes used to determine positions of seafloor and sub-seafloor data points are not covered in this document. Guidance only is given in this document for the use of marine shear waves (A.8.3.3), marine surface waves (A.8.3.4), electrical resistivity imaging (A.8.3.5) and electromagnetic imaging (A.8.3.6).

Petroleum and natural gas industries - Specific requirements for offshore structures - Part 10: Marine geophysical investigations (ISO 19901-10:2021)

ISO/PAS 24565:2022 石油和天然气工业.陶瓷内衬管

Petroleum and natural gas industries — Ceramic lined tubing

22/30440724 DC BS EN ISO 19901-8 石油和天然气工业 海上结构物的特殊要求 第 8 部分：海洋土壤调查

BS EN ISO 19901-8. Petroleum and natural gas industries. Specific requirements for offshore structures - Part 8. Marine soil investigations

EN ISO 19901-5:2021 石油和天然气工业.海上结构的特殊要求.第5部分:设计和施工中的重量控制

This document specifies requirements for managing and controlling the weight and centre of gravity (CoG) of offshore facilities by means of mass management during all lifecycle phases including; conceptual design, front end engineering design (FEED), detail engineering, construction and operations. These can be new facilities (greenfield) or modifications to existing facilities (brownfield). Weight management is necessary throughout operations, decommissioning and removal to facilitate structural integrity management (SIM). The provisions of this document are applicable to fixed and floating facilities of all types. Weight management only includes items with static mass. Snow and ice loads are excluded as they are not considered to be part of the facility. Dynamic loads are addressed in ISO 19904-1, ISO 19901-6 and ISO 19901-7. This document specifies: a) requirements for managing and controlling weights and CoGs of assemblies and entire facilities; b) requirements for managing weight and CoG interfaces; c) standardized terminology for weight and CoG estimating and reporting; d) requirements for determining not-to-exceed (NTE) weights and budget weights; e) requirements for weighing and determination of weight and centre of gravity (CoG) of tagged equipment, assemblies, modules and facilities; This document can be used: f) as a basis for costing, scheduling or determining suitable construction method(s) or location(s) and installation strategy; g) as a basis for planning, evaluating and preparing a weight management plan and reporting system; h) as a contract reference; i) as a means of refining the structural analysis or model.

Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight management (ISO 19901-5:2021)

21/30444400 DC BS EN ISO 13703-2 石油、石化和天然气工业 海上平台和陆上工厂的管道系统 第 2 部分：材料

BS EN ISO 13703-2. Petroleum, petrochemical and natural gas industries. Piping systems on offshore platforms and onshore plants - Part 2. Materials

SY/T 7634-2021 海底输气管道工艺设计规范

Submarine gas pipeline process design specifications