77.080.10 铁 标准查询与下载

KS D ISO 10719-2021 铸铁.非结合碳含量的测定.感应炉燃烧后的红外吸收法

Cast irons — Determination of non-combined carbon content —Infrared absorption method after combustion in an induction furnace

T/SDAS 266-2021 风电设备铸造用生铁

本文件规定了风电设备铸造用生铁的牌号表示、技术要求、试验方法、检验规则、标志、运输、贮存及质量证明书。 本文件适用于风电设备铸造用生铁。

Cast iron for wind power equipment

GSO ISO/TR 945-3:2021 铸铁的显微组织 第3部分：基体组织

ISO/TR 945-3:2016 gives the designations, descriptions and reference micrographs of the matrix structures of cast irons. It applies to the following types of cast irons: - grey cast irons (Table 4.1); - spheroidal graphite cast irons (Table 4.2); - austenitic cast irons (Table 4.3); - malleable cast irons (Table 4.4); - compacted (vermicular) graphite cast irons (Table 4.5); - ausferritic spheroidal graphite cast irons (Table 4.6); - abrasion-resistant cast irons (Table 4.7). Each matrix structure is defined with explanations and micrographs. Unless otherwise stated in Clause 4, the micrographs shown correspond to samples etched with a solution of 2 % nitric acid in ethanol (Nital).

Microstructure of cast irons — Part 3: Matrix structures

EC 1-2021 UNI EN 1563-2021 创立 球墨铸铁

Founding - Spheroidal graphite cast irons

DS/EN 1563:2021 创始 球墨铸铁 修正 1

Founding – Spheroidal graphite cast irons – CORRECTIONS 1

T/CFA 0102012-2021 耐热低合金铁素体球墨铸铁件

本文件规定了耐热低合金铁素体球墨铸铁件的牌号及表示方法、基本要求、技术要求、试验方法、检验规则、标志和质量证明书、防锈、包装、贮存和运输。

Ferritic ductile iron casting with low alloy for heat resist

T/CFA 020101242-2021 含碳化物的等温淬火球墨铸铁磨球

本文件规定了等温淬火球墨铸铁磨球的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和储存。

Austempered ductile iron grinding balls containing carbides

T/CFA 020101243-2021 等温淬火球墨铸铁件

本文件规定了等温淬火球墨铸铁件的术语和定义、牌号的表示方法、生产方法和化学成分、技术要求、取样、检验方法、检验规则、标志及质量证明书、防锈、包装、贮存和运输要求 。

Austempered ductile iron (ADI) castings

T/CFA 020101141-2021 铸铁炊具

本文件规定了铸铁炊具产品的术语和定义、分类及型号、技术要求、试验方法、检验规则以及标识、包装、运输及贮存。

Cast iron cooking utensils

OENORM EN 16079-2021 铸造 蠕墨铸铁

Founding - Compacted (vermicular) graphite cast irons

PN-EN 1563-2018-10 P 创始 球墨铸铁

Founding -- Spheroidal graphite cast irons

T/CFA 020101031-2020 轨道交通用低温铁素体球墨铸铁件

本文件规定了使用温度在-20℃至-60℃的轨道交通用低温铁素体球墨铸铁件的术语和定义、生产方法、化学成分和热处理、技术要求、取样、试验方法、复检、铸件的其他检验、记录、标识和质量证明书、防锈、包装、运输、贮运要求。 

Low temperature ferritic spheroidal graphite iron castings for railway transportation application

T/SSEA 0086-2020 HIsmelt熔融还原高纯生铁

本文件规定了HIsmelt熔融还原高纯生铁的术语和定义、技术要求、试验方法、检验规则、贮存、运输、标志和质量证明书。 本文件适用于HIsmelt熔融还原高纯生铁（以下简称“高纯生铁”）。

HIsmelt Smelting Reduction High Purity Pig Iron

20/30425803 DC BS EN 16079 成立 蠕墨铸铁（蠕墨铸铁）

BS EN 16079. Founding. Compacted (vermicular) graphite cast irons

20/30425800 DC BS EN 1561 成立 灰铸铁

BS EN 1561. Founding. Grey cast irons

prEN 1561-2020 创立 灰口铸铁

Founding - Grey cast irons

prEN 16079-2020 铸造 蠕墨铸铁

Founding - Compacted (vermicular) graphite cast irons

T/CFA 0203041.1-2020 汽车铸件抛喷清理用金属丸料 订货技术条件 第 1 部分：铸铁件

本文件规定了汽车铸铁件抛喷清理用金属丸料的分类及标记、技术要求、检验方法及规则，订货  及验收条件以及标识和包装，相关附件作为铸造厂及材料生产厂家的使用建议。  

Technical requirements of ordering of metal abrasives for shot blasting and peening cleaning of automobile castings Part 1：Iron castings

BS ISO 17804:2020 创立 奥铁素体球墨铸铁 分类

What is ISO 17804 about? ISO 17804 defines the grades and the corresponding requirements for ausferritic spheroidal graphite cast irons. ISO 17804 specifies five grades of ausferritic spheroidal graphite cast iron by a classification based on mechanical properties determined on machined test pieces prepared from: Separately cast samples, side-by-side cast, or cast-on samples Samples cut from a casting ISO 17804 also specifies two grades by classification as a function of hardness. Who is ISO 17804 f or? ISO 17804 on ausferritic spheroidal graphite cast irons is relevant to: Mining, earthmoving, and manufacturing industries Suppliers of graphite Why should you use ISO 17804? Ausferritic spheroidal graphite cast iron is a cast alloy, iron, carbon, and silicon-based, carbon primarily in the form of spheroidal graphite particles.  ISO 17804 deals with the classification of ausferritic spheroidal graphite cast irons in accordance with the mechanic...

Founding. Ausferritic spheroidal graphite cast irons. Classification

BS ISO 185:2020 灰铸铁 分类

What is ISO 185 - Grey cast irons   about?   ISO 185 specifies the properties of unalloyed and low-alloyed grey cast irons used for castings that have been manufactured in sand moulds or in moulds with comparable thermal behaviour.   ISO 185 also specifies the characterizing properties of grey cast irons by any of the following:   The tensile strength of cast samples   If agreed by the manufacturer and the purchaser, the tensile strength of samples cut from a casting   If agreed between the manufacturer and the purchaser, the hardness of the material is determined on castings or on a cast-on knob  

Grey cast irons. Classification