共找到 1331 条与 铁合金 相关的标准,共 89 页
本标准规定了钒铁的要求、试验方法、检验规则以及包装、储运、标志和质量说明书。 本标准适用于炼钢或合金材料中作为钒元素添加剂的钒铁。
Ferrovanadium
本部分规定了用高氯酸脱水重量法测定硅含量的原理、试剂和材料、仪器、取制样、分析步骤、结果计算等。 本部分适用于锰铁及高炉锰铁中硅含量的测定,测定范围(质量分数):0.10%~5.O0%。
Ferromanganese and blast furnace ferromanganese--Determination of silicon content--Gravimetric method after perchloric acid dehydration
本部分规定了用电位滴定法和硝酸铵氧化滴定法测定锰含量的原理、试剂和材料、仪器、取制样、分析步骤、结果计算等。 本部分适用于锰铁及高炉锰铁中锰含量的测定,测定范围(质量分数):50.00%~95.00%。方法一不适于铬含量(质量分数)>0.5%、钒含量(质量分数)>0.4%的锰铁及高炉锰铁中锰含量的测定。
Ferromanganese and blast furnace ferromanganese--Determination of manganese content--Potentiometric method and titrimetric method after ammonium nitrate oxidation
本标准规定了红外线吸收法测定硫含量。 本标准适用于锰铁及高炉锰铁中硫含量的测定。测定范围0.005%(m/m)~0.045%(m/m)。
Methods for chemical analysis of ferromanganese and blast furnace ferromanganese The infrared absorption method for the determination of sulfur content
本标准规定了红外线吸收法测定碳含量。 本标准适用于锰铁及高炉锰铁中碳含量的测定。测量范围:0.025%(m/m)~10.00%(m/m)。
Methods for chemical analysis of ferromanganese and blast furnace ferromanganese The infrared absorption method for the determination of carbon content
本标准规定了检查铁合金取样和制样偏差的试验方法的一般要求、试验方法、标准分析和试验结果评定。 本标准规定的试验方法适用于检查有关的标准中规定的铁合金取样和制样方法与仲裁方法之间的偏差或与其他两种方法之间的偏差。
Ferroalloys-Experimental methods for checking the bias of sampling and sample preparation
本标准规定了火焰原子吸收光谱法测定锰量。 本标准适用于钨铁中锰量的测定。测定范围:0.05%~0.70%。
Methods for chemical analysis of ferrotungsten-The flame atomic absorption spectrometric method for the determination of manganese content
本标准规定了火焰原子吸收光谱法测定铜量。 本标准适用于钨铁中铜量的测定。测定范围:0.02%~0.2%。
Methods for chemical analysis of ferrotungsten-The flame atomic absorption spectrometric method for the determination of copper content
本标准规定了铌铁的技术要求、试验方法、检验规则、包装、储运、标志和质量证明书。 本标准适用于以五氧化二铌及铌铁精矿为原料生产的供炼钢、铸造作添加剂和电焊条合金剂用的铌铁。
Ferroniobium
本标准适用于碳素锰铁、中碳锰铁、低碳锰铁及高炉锰铁中磷量的测定。 本标准规定了以下两个方法测定锰铁中磷量。 方法I:钼蓝分光光度法测定范围:0.050%~0.450%。 方法Ⅱ:磷量滴定法测定测定范围:0.080%~0.650%。
Methods for chemical analysis of ferromanganese. The determination of phosphorus content
本标准规定了用EDTA容量法测定硅铁中的铝量。 本标准适用于硅铁中铝量的测定。测定范围:0.60%~5.00%。
Methods for chemical analysis of ferrosilicon the EDTA volumetric method for the determination of aluminium content
本标准规定了钨铁的技术要求、试验方法、检验规则、包装、储运、标志和质量证明书。 本标准适用于炼钢和铸造中作为钨元素加入剂用的钨铁。
Ferrotungsten
本标准规定了稀土硅铁合金、稀土镁硅铁合金中钛含量的测定方法。 本标准适用于稀土硅铁合金、稀土镁硅铁合金中钛含量的测定。测定范围:0.30%~3.00%。
Methods for chemical analysis of rare earth ferrosilicon alloy and rare earth ferrosilicon magnesium alloy.Determination of titanium content
本标准规定了稀土硅铁合金、稀土镁硅铁合金中稀土总量的测定方法。 本标准适用于稀土硅铁合金、稀土镁硅铁合金中稀土总量的测定。测定范围:2%~42%。
Methods for chemical analysis of rare earth ferrosilicon alloy and rare earth ferrosilicon magnesium alloy--Determination of total rare earth content
本标准规定了稀土硅铁合金、稀土镁硅铁合金中钙、镁、锰量的测定方法。 本标准适用于稀土硅铁合金、稀土镁硅铁合金中钙、镁、锰量的测定。测定范围:钙0.50%~6.00%;镁0.20%~11.00%;锰0.20%~4.00%。
Methods for chemical analysis of rare earth ferrosilicon alloy and rare earth ferrosilicon magnesium alloy.Determination of calcium, magnesium, and manganese contents
本标准规定了稀土硅铁合金中硅含量的测定方法。 本标准适用于稀土硅铁合金中硅含量的测定。测定范围:20%~50%。
Methods for chemical analysis of rare earth ferrosilicon alloy and rare earth ferrosilicon magnesium alloy--Determination of silica content
本标准规定了稀土镁硅铁合金中氧化镁的测定方法。 本标准适用于稀土镁硅铁合金中氧化镁的测定。测定范围:0.30%~3.00%。
Methods for chemical analysis of rare earth ferrosilicon alloy and rare earth ferrosilicon magnesium alloy.Determination of magnesia content
本标准规定了硼铁交货的技术要求、试验方法、检验规则、包装、储运、标志和质量证明书。 本标准适用于炼钢、铸造和供非晶、超微晶母合金、钕铁硼合金及其他用途作硼元素加入剂用的硼铁。
Ferroboron
本标准规定了铁合金验收、包装、储运、标志和质量证明书。 本标准适用于铁合金产品的交付。
The general rules for inspection、packing、storing transportation、marking and certification of ferroalloy
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号