77.120.60 铅、锌、锡及其合金 标准查询与下载

GB/T 1978-1988 电池锌板

本标准适用于电池工业制造锌-锰干电池负极用锌板。

Zinc plate for dry cell

GB/T 1474-1988 铅及铅锑合金线

本标准适用于各工业部门用铅及铅锑合金线。

Lead and lead-antimony alloy wire

GB/T 1473-1988 铅及铅锑合金棒

本标准适用于各工业部门用的铅及铅锑合金棒。

Lead and lead-antimony alloy rod

GB/T 1471-1988 铅阳极板

本标准适用于电解工业用铅阳极板。

Lead plate for anode

GB/T 1470-1988 铅及铅锑合金板

本标准适用于做放射性防护、稀硫酸容器的衬里和其他工业部门做耐酸材料用的铅及铅锑合金板。

Lead and lead-antimony alloy plate

GB/T 8738-1988 铸造锌合金锭

本标准适用于制造锌合金铸件用的铸造锌合金锭。

Zinc alloy ingots for casting

GB/T 5191-1985 锡、铅及其合金箔和锌箔

本标准适用于电气、仪表等工业部门制造零件使用的锡、铅及其合金箔和锌箔。

Tin and tin alloy foil--Lead and lead alloy foil--Zinc foil

GB/T 3626-1983 五氧化二钽技术条件

本标准适用于液液萃取法制得的五氧化二钽，供生产钽粉、钽条、碳化钽等用。

Technical requirements of tantalum pentoxide

T/CASME 1338-2024 铅锑合金生产工艺技术规范

本文件规定了铅锑合金生产的生产条件、生产工艺、生产过程管理、技术指标、试验方法、检验规则。

Technical specifications for production process of lead-antimony alloy

ASTM E536-23 锌和锌合金化学分析的标准试验方法

1.1 These test methods cover the chemical analysis of zinc and zinc alloys having chemical compositions within the limits of Table 1. TABLE 1 Scope of Mass Fraction Ranges for Zinc and Zinc Alloys Element Composition Range, % Aluminum 0.005 to 4.5 Cadmium 0.001 to 0.5 Copper 0.001 to 1.3 Iron 0.001 to 0.1 Lead 0.001 to 1.6 Magnesium 0.001 to 0.1 Tin 0.001 to 0.1 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 These test methods appear as follows: Sections Aluminum by the EDTA Titrimetric Method (0.5 to 4.5 %) 10 – 17 Aluminum, Cadmium, Copper, Iron, Lead, and Magnesium by the Atomic Absorption Spectrometry Method 18 – 28 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 6. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys

ASTM E634-23 火花原子发射光谱法分析用锌和锌合金取样的标准实施规程

1.1 This practice covers the sampling of zinc and zinc alloys to obtain a sample suitable for quantitative spark atomic emission spectrochemical analysis. Included are procedures for obtaining representative samples from molten metal, from fabricated or cast products that can be melted, and from other forms that cannot be melted. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Sampling Zinc and Zinc Alloys for Analysis by Spark Atomic Emission Spectrometry

ASTM B897-23 锌及锌合金大块、块状、半块状和扁锭结构的标准规范

1.1 This specification covers zinc and zinc alloy jumbo, block, half block, and slab ingot meeting dimensional requirements. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot

ASTM B6-23 锌的标准规范

1.1 This specification covers zinc metal made from ore or other material by a process of distillation or by electrolysis in five grades as follows: 1.1.1 LME Grade 1.1.2 Special High Grade 1.1.3 High Grade 1.1.4 Intermediate Grade 1.1.5 Prime Western Grade NOTE 1—Certain continuous galvanizing grades are specified in Specification B852. Other continuous galvanizing and controlled lead grades are not included in this specification but are covered by specific user purchasing specifications. 1.2 This specification does not cover zinc produced by “sweating” or remelting of secondary zinc. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Zinc

T/CNIA 0195-2023 废铅膏制备粗铅（悬浮电解和固相电解工艺）污染控制技术规范

本文件规定了废铅膏制备粗铅(悬浮电解和固相电解工艺)污染控制总则、技术要求、污染排放控制和环境管理。 本文件适用于废铅膏采用悬浮电解和固相电解工艺制备粗铅过程的污染控制，可用于指导废铅膏制备粗铅生产线或生产企业的污染控制和环境管理。

Technical specifications for pollution control in preparing crude lead from waste lead paste (suspension electrolysis and solid phase electrolysis processes)

T/CNIA 0196-2023 废铅膏制备精铅（选择性浸出和旋转电积工艺）污染控制技术规范

本文件规定了废铅膏制备精铅（选择性浸出和旋转电积工艺）工艺污染控制总则、技术要求、污染排放控制和环境管理。 本文件适用于废铅膏采用选择性浸出和旋转电积工艺制备精铅过程的污染控制，可用于指导废铅膏制备精铅生产线或生产企业的污染控制和环境管理。

Technical Specification for Pollution Control in Preparing Refined Lead from Waste Lead Paste (Selective Leaching and Rotary Electrodeposition Process)

T/CNIA 0197-2023 废铅膏制备电池级氧化铅（定向络合和转化工艺）污染控制技术规范

本文件规定了废铅膏制备电池级氧化铅(定向络合和转化工艺)污染控制的总则、技术要求、污染排放控制和环境管理。 本文件适用于废铅膏采用定向络合和转化工艺制备电池级氧化铅过程的污染控制，可用于指导废铅膏制备电池级氧化铅生产线或生产企业的污染控制和环境管理。

Technical Specification for Pollution Control in Preparation of Battery Grade Lead Oxide from Waste Lead Paste (Directed Complexation and Conversion Process)

KS D 1970-2022 铅金属化学分析方法

Methods for chemical analysis of lead metal

ASTM B960-18(2022) 优质西方级回收（PWG-R）锌标准规范

1.1 This specification covers prime western grade-recycled (PWG-R) zinc made by recycling zinc secondary materials including but not limited to drosses and skimmings. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc

ASTM B852-16(2022) 钢板热浸镀锌用连续镀锌级（CGG）锌合金标准规范

1.1 This specification covers grades of zinc alloys, commonly known as Continuous Galvanizing Grade (CGG) alloys that contain aluminum, or aluminum and lead, that are used in continuous hot-dip galvanizing of steel sheet. The compositions for CGG grades made from primary zinc are shown in Table 1. Exceptions for grades made from secondary zinc are found in footnote C. 1.2 CGG alloys specified in Specification B852 are used in continuous hot-dip galvanizing of steel sheet to produce product, as specified in Specification A653/A653M. 1.3 Other alloy compositions not included in Specification B852, and as may be agreed upon between the producer and the user, may be used for continuous galvanizing. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel

ASTM B860-18(2022) 热浸镀锌用锌母合金标准规范

1.1 This specification covers zinc master alloys which are used in hot dip galvanizing for the purpose of adjusting the concentration of certain alloying elements in the molten zinc bath. Table 1 covers the chemical composition of these materials which include six master alloys of zinc-aluminum (brightener) and one master alloy of zinc-antimony. ASTM Common UNS Type A-1 90/10 Zn/Al High Purity Z30750 Type A-2 90/10 Zn/Al Low Purity Z31710 Type A-3 95/5 Zn/Al High Purity Z30503 Type A-4 95/5 Zn/Al Low Purity Z31510 Type A-5 96/4 Zn/Al High Purity Z31520 Type A-6 96/4 Zn/Al Low Purity Z30504 Type S-1 90/10 Zn/Sb Z55710 NOTE 1—The master alloys in Specification B860 are intended to be used primarily in hot-dip galvanizing to adjust the concentration of certain elements in a molten zinc bath, and differ from the zinc-aluminum alloys in Specification B997 which are intended to be used primarily in molten zinc-aluminum. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing