77.140.20 不锈钢 标准查询与下载

YB/T 6124.2-2023 稀土钢 第2部分：高碳铬轴承钢

本文件规定了稀土高碳铬轴承钢的分类和代号、订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。本文件适用于制作轴承套圈和滚动体用稀土高碳铬轴承钢热轧和锻制圆棒、圆盘条、冷拉圆钢（直条或盘状）、钢丝及无缝钢管。

Rare Earth Steels Part 2: High Carbon Chromium Bearing Steels

YB/T 6136-2023 钢轨涡流检测方法

本文件规定了钢轨涡流检测的原理、一般要求、对比试样、检测设备、检测程序、结果评定和检测报告。本文件适用于43kg/m～75kg/m对称断面和非对称断面钢轨的涡流检测，其他钢轨的涡流检测亦可参照执行。

Rail eddy current detection method

ISO 630-5:2023 结构钢第5部分:耐大气腐蚀性能提高的结构钢交货技术条件

Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance

KS D 3595-2023 通用管道用不锈钢管

Stainless steel pipes for general purpose piping

23/30461471 DC BS ISO 17650 低合金钢 锰、磷、铬、镍、钼、钴、铜、钒、钛、砷和锡的测定 电感耦合等离子体原子发射光谱法

BS ISO 17650. Low-alloyed steel. Determination of Mn, P, Cr, Ni, Mo, Co, Cu, V, Ti, As and Sn. Inductively coupled plasma atomic emission spectrometric method

ASTM A1018/A1018M-23a 高强度低合金、高强度可成形性低合金和超高强度结构用热轧、商用、拉伸、碳素厚卷钢板和带材标准规范

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formabilit

ASTM A493-23 冷镦和冷锻用不锈钢丝和线材标准规范

Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging

ASTM A965/A965M-23 压力和高温部件用奥氏体钢锻件标准规范

Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

ASTM A1016/A1016M-23 铁素体合金钢、奥氏体合金钢和不锈钢管的一般要求标准规范

Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

ASTM A314-23 锻造用不锈钢坯料和棒材标准规范

Standard Specification for Stainless Steel Billets and Bars for Forging

KS D ISO 18632-2023 合金钢锰含量的测定电位滴定法或目视滴定法

Alloyed steel — Determination of manganese — Potentiometric or visual titration method

ISO 16143-4:2023 一般用途不锈钢 第 4 部分：光亮产品

Stainless steels for general purposes — Part 4: Bright products

ISO/DIS 17650:2023 低合金钢 锰、磷、铬、镍、钼、钴、铜、钒、钛、砷和锡的测定 电感耦合等离子体原子发射光谱法

Low-alloyed steel — Determination of Mn, P, Cr, Ni, Mo, Co, Cu, V, Ti, As and Sn — Inductively coupled plasma atomic emission spectrometric method

ASTM A484/A484M-23a 不锈钢棒材、坯料、型材和锻件的一般要求标准规范

Standard Specification for General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings

ASTM A276/A276M-23 不锈钢棒材和型材标准规范

1.1 This specification covers hot-finished or cold-finished bars except bars for reforging (Note 1). It includes rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels. The free-machining types (Note 2) for general corrosion resistance and high-temperature service are covered in a separate specification. NOTE 1—For bars for reforging, see Specification A314. NOTE 2—For free-machining stainless bars designed especially for optimum machinability, see Specification A582/A582M. NOTE 3—There are standards covering high nickel, chromium, austenitic corrosion, and heat-resisting alloy materials. These standards are under the jurisdiction of ASTM Subcommittee B02.07 and may be found in Annual Book of ASTM Standards, Vol. 02.04. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Stainless Steel Bars and Shapes

ISO/FDIS 11973:2023 一般用途的耐热铸钢和合金

Heat-resistant cast steels and alloys for general applications

T/GXAS 485-2023 红土镍矿生产不锈钢单位产品能耗限额

本文件界定了红土镍矿生产不锈钢单位产品能耗限额涉及的术语和定义，规定了红土镍矿生产不锈钢主要工序单位产品能耗限额等级、限定值和准入值的技术要求、统计范围和计算方法。  本文件适用于广西行政区域内以红土镍矿为原料冶炼不锈钢产品生产企业的能耗计算、控制和评价，以及对新建、改建和扩建项目的能耗控制。

The norm of energy consumption per unit product of stainless steel produced from laterite nickel

ASTM A1018/A1018M-23 高强度低合金、具有改进成形性的高强度低合金钢和超高强度结构用热轧、商用、拉伸、碳素厚卷材用薄钢板和带材标准规范

1.1 This specification covers hot-rolled, heavy-thickness coils beyond the size limits of Specification A1011/A1011M. 1.2 The product is available in six designations: Commercial Steel, Drawing Steel, Structural Steel, High-Strength Low-Alloy Steel, High-Strength Low-Alloy Steel with Improved Formability, and Ultra-High Strength Steel. 1.3 This material is available only in coils described as follows: Product Size Limits, Coils Only Width, in. [mm] Thickness, in. [mm] Strip Over 8 to 12, incl [Over 200 to 300] 0.230 to 1.000, incl [From 6.0 through 25] Sheet Over 12 [Over 300] 0.230 to 1.000, incl [From 6.0 through 25] NOTE 1—The changes in width limits with the publication of A635/ A635M – 06a result in a change in tensile testing direction for material from 0.180 in. [4.5 mm] to 0.230 in. exclusive [6.0 mm exclusive] over 48 in. [1200 mm] wide as that material is now covered by Specification A568/A568M – 06a. The purchaser is advised to discuss this change with the supplier. 1.4 Sheet and strip in coils of sizes noted in 1.3 are covered by this specification only with the following provisions: 1.4.1 The material is to be fed directly from coils into a blanking press, drawing or forming operation, tube mill, rolling mill, or sheared or slit into blanks for subsequent drawing or forming. 1.4.2 The material is not to be converted into steel plates for structural or pressure vessel use unless tested in complete accordance with the appropriate sections of Specifications A6/A6M (plates provided from coils) or A20/A20M (plates produced from coils). Plate converted from coils is no longer governed by this sheet steel specification and since this material is now a plate, the requirements of the appropriate plate specification shall apply, except in cases where there is a conflict between the requirements of the plate specification and this specification. In these cases, the more restrictive limits of either specification shall apply. 1.4.3 The dimensional tolerances of Specification A635/ A635M are applicable to material produced to this specification. 1.4.4 Not all strength levels are available in all thicknesses. The user should consult the producer for appropriate size limitations. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formabilit

ASTM A1011/A1011M-23 具有改进成形性和超高强度的高强度低合金结构热轧薄钢板和钢带

1.1 This specification covers hot-rolled, carbon, structural, high-strength low-alloy, high-strength low-alloy with improved formability, and ultra-high strength steel sheet and strip, in coils and cut lengths. 1.2 Hot rolled steel sheet and strip is available in the designations as listed in 4.1. 1.3 This specification is not applicable to the steel covered by Specification A635/A635M. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

T/FSMA 001-2022 不锈钢水管安装规程

前言 1 范围 2 规范性引用文件 3 术语和定义 4 水管与管件 5 设计 6 施工 7 附件 8 验收 9 巡查维护 附录 A 卡压式连接不锈钢水管安装方法(卡压钳) 附录 B 环压式连接不锈钢水管安装方法 附录 C 沟槽式连接不锈钢水管安装方法 附录 D 分水器的结构型式和规格尺寸

Stainless steel water pipe installation regulations