77.140.30;77.140.50 标准查询与下载
共找到 99 条与 相关的标准，共 7 页
This part of ISO 9328 specifies the general technical delivery conditions for steel flat products (plate/sheet and strip) used principally for the construction of pressure equipment. The general technical delivery requirements in ISO 404 also apply to products supplied in accordance with this part of ISO 9328.
Steel flat products for pressure purposes - Technical delivery conditions - Part 1: General requirements
- ICS
- 77.140.30;77.140.50
- CCS
- H46
- 发布
- 2011-05-01
- 实施
This part of ISO 9328 specifies the requirements for flat products for pressure equipment made of quenched and tempered weldable fine grain steels as listed in Tables A.1 and B.1. The requirements and definitions in ISO 9328-1 also apply to this part of ISO 9328. NOTE 1 Fine grain steels are understood to be steels with a ferritic grain size of 6 or finer when tested in accordance with ISO 643. NOTE 2 This part of ISO 9328 offers the possibility of specifying products in accordance with European design codes and ASME-type design codes.
Steel flat products for pressure purposes - Technical delivery conditions - Part 6: Weldable fine grain steels, quenched and tempered
- ICS
- 77.140.30;77.140.50
- CCS
- H46
- 发布
- 2011-05-01
- 实施
This part of ISO 9328 specifies requirements for flat products for pressure purposes made of stainless steels, including austenitic creep-resisting steels, in thicknesses as indicated in Tables 7 to 10. Additionally the requirements of ISO 9328-1 also apply.
Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels
- ICS
- 77.140.30;77.140.50
- CCS
- H46
- 发布
- 2011-05-01
- 实施
This part of ISO 9328 specifies the technical delivery conditions for plates and strip for pressure equipment made of non-alloy and alloy steels as specified in Tables A.1 and B.1. The requirements and definitions of ISO 9328-1 also apply to this part of ISO 9328.
Steel flat products for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
- ICS
- 77.140.30;77.140.50
- CCS
- H46
- 发布
- 2011-05-01
- 实施
This part of ISO 9328 specifies the technical delivery conditions for plates and strip for pressure equipment made of nickel-alloy steels as specified in Tables A.1 and B.1. The requirements and definitions of ISO 9328-1 also apply to this part of ISO 9328. NOTE This part of ISO 9328 offers the possibility of specifying products in accordance with European design codes and ASME-type design codes.
Steel flat products for pressure purposes - Technical delivery conditions - Part 4: Nickel-alloy steels with specified low temperature properties
- ICS
- 77.140.30;77.140.50
- CCS
- H46
- 发布
- 2011-05-01
- 实施
This Japanese Industrial Standard specifies the hot-rolled steel sheet, plates and strip (hereafter referred to as "steel plates, sheets and strip")to be used for welded gas cylinders with a maximum capacity of 500 litres which contain such high-pressure gases as LP gas and acetylene.
Steel sheet, plates and strip for gas cylinders
- ICS
- 77.140.30;77.140.50
- CCS
- H46
- 发布
- 2010-10-20
- 实施
This European Standard specifies the requirements for flat products for pressure equipments made ofthermomechanically rolled steels as specified in Table 1.The steels are not suitable for hot forming.NOTE 1 At the time of publication of this European Standard, no sufficient data for the standardization of the elevated temperature properties of these steels was available. If their use at such temperatures is intended the conditions for this should be specially agreed between the interested parties.The requirements of EN 10028-1 also apply.NOTE 2 Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption o
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
- ICS
- 77.140.30;77.140.50
- CCS
- 发布
- 2010-08-30
- 实施
- 2010-08-30
This European Standard specifies the requirements for flat products for pressure equipments made of quenched and tempered steels as specified in Table 1.The requirements in EN 10028-1 also apply.NOTE Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard (Part 1 and this Part 6 of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard ag
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
- ICS
- 77.140.30;77.140.50
- CCS
- 发布
- 2010-08-30
- 实施
- 2010-08-30
This European Standard specifies requirements for flat products for pressure equipment made of nickel alloy steels as specified in Table 1.The requirements and definitions of EN 10028-1 also apply.NOTE Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard (Part 1 and this Part 4 of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
- ICS
- 77.140.30;77.140.50
- CCS
- 发布
- 2010-08-30
- 实施
- 2010-08-30
This European Standard specifies general technical delivery conditions for flat products for the construction of pressure equipment.The general technical delivery conditions in EN 10021 also apply.NOTE Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard (Part 1 and the other relevant part of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this materi
Flat products made of steels for pressure purposes - Part 1: General requirements
- ICS
- 77.140.30;77.140.50
- CCS
- 发布
- 2010-08-30
- 实施
- 2010-08-30
This European Standard specifies requirements for flat products for pressure equipment made of weldable nonalloy and alloy steels with elevated temperature properties as specified in Table 1.The requirements and definitions of EN 10028-1 also apply.NOTE Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard (Part 1 and this Part 2 of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
- ICS
- 77.140.30;77.140.50
- CCS
- 发布
- 2010-08-30
- 实施
- 2010-08-30
This European Standard specifies requirements for flat products for pressure equipment made of weldable fine grain steels as specified in Table 1.NOTE 1 Fine grain steels are understood as steels with a ferritic grain size of 6 or finer when tested in accordance with EN ISO 643.The requirements and definitions of EN 10028-1 also apply.NOTE 2 Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard (Part 1 and this Part 3 of the series) and does not presume
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
- ICS
- 77.140.30;77.140.50
- CCS
- 发布
- 2010-08-30
- 实施
- 2010-08-30
This Standard specifies the hot-rolled steel plates (hereafter referred to as "steel olates")with improved weldability to be used for pressure vessels for intermidiate temperature service
Steel plates for pressure vessels for intermediate temperature service
- ICS
- 77.140.30;77.140.50
- CCS
- H46
- 发布
- 2010-02-22
- 实施
This Standard specifies the hot-rolled carbon steel plates(hereafter referred to as "steel plates") to be used mainly for pressure vessels for intermediate and moderate temperature services.
Carbon steel plates for pressure vessels for intermediate and moderate temperature services
- ICS
- 77.140.30;77.140.50
- CCS
- H46
- 发布
- 2010-02-22
- 实施
Specifies requirements for flat products for pressure equipment made of nickel alloy steels as specified in table 1.
Flat products made of steels for pressure purposes Part 4: Nickel alloy steels with specified low temperature properties
- ICS
- 77.140.30;77.140.50
- CCS
- H46
- 发布
- 2009-12-04
- 实施
Specifies requirements for flat products for pressure equipment made of thermomechanically rolled steels as specified in table 1.
Flat products made of steels for pressure purposes Part 5: Weldable fine grain steels, thermomechanically rolled
- ICS
- 77.140.30;77.140.50
- CCS
- H46
- 发布
- 2009-12-04
- 实施
Specifies the requirements for flat products for pressure equipment made of quenched and tempered steels as specified in table 1.
Flat products made of steels for pressure purposes Part 6: Weldable fine grain steels, quenched and tempered
- ICS
- 77.140.30;77.140.50
- CCS
- H46
- 发布
- 2009-12-04
- 实施
Specifies requirements for flat products for pressure equipment made of weldable non-alloy and alloy steels with elevated temperature properties as specified in table 1.
Flat products made of steels for pressure purposes Part 2: Non-alloy and alloy steels with specified elevated temperature properties
- ICS
- 77.140.30;77.140.50
- CCS
- H46
- 发布
- 2009-12-04
- 实施
Specifies requirements for flat products for pressure equipment made of weldable fine grain steels as specified in table 1.
Flat products made of steels for pressure purposes Part 3: Weldable fine grain steels, normalized
- ICS
- 77.140.30;77.140.50
- CCS
- H46
- 发布
- 2009-12-04
- 实施
Flat products made of steels for pressure purposes - Part 5 : weldable fine grain steels, thermomechanically rolled.
- ICS
- 77.140.30;77.140.50
- CCS
- H46
- 发布
- 2009-09-01
- 实施
- 2009-09-26
