77.140.70 型钢 标准查询与下载

GSO ISO 657-16:2013 热轧型钢 第16部分：斜翼缘柱型钢（公制系列） 尺寸和截面性能

This International Standard specifies dimensions and sectional properties of metric series hot-rolled sloping flange steel column sections

Hot-rolled steel sections -- Part 16: Sloping flange column sections (metric series) -- Dimensions and sectional properties

KS W 9011-2012 滑翔机起飞用橡胶绳

Rubber rope for glider

YB/T 4291-2012 塔机用带尖角冷弯矩形钢管

本标准规定了塔机用带尖角冷弯矩形钢管的产品代号、订货内容、截面尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书。本标准适用于热轧钢带在连续辊式冷弯机组上生产的用于塔机机身构件的带尖角矩形钢管(以下简称钢管)。

Roll-forming rectangle steel tube with a sharp corner for tower crane

YB/T 4274-2012 海洋石油平台用热轧H型钢

本标准规定了海洋石油平台用热轧H型钢的牌号、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书等。本标准适用于制造海洋石油平台结构用的一般强度和高强度热轧H型钢(以下简称H型钢),其翼缘厚度不大于50mm。海洋石油平台用热轧H型钢的生产厂应由中国船级社或其他船级社认可。

Hot rolling H section steel for offshore oil drilling platform

ANSI/AISI S201-2012 冷轧成型钢框架的北美标准.产品数据

North American Standard for Cold-Formed Steel Framing - Product Data

GOST 30245-2012 建筑物用钢弯曲封闭焊接方形和矩形截面. 规格

Steel bent closed welded square and rectangular section for building. Specifications

GOST 32603-2012 带有矿棉绝热性的三层金属板. 规格

Three-layered metal panels with mineral wool insulation. Specifications

ASTM A1075-12 凸缘钢制U形槽柱的标准规格

1.1 This specification covers flanged U-channel carbon steel posts having a nominal weight ranging from 0.75 to 6.0 lb/ft and a nominal width ranging from 1.25 to 4.0 in. These posts are furnished in the as-wrought condition intended for applications requiring high tensile strength or crashworthiness and with a lower carbon (LC) designation for use where higher ductility or improved weldability are required. These materials are available in multiple yield strength levels of 50, 60, 70, and 80 ksi (345, 420, 485, and 550 MPa). The 50- and 60-ksi (345- and 420-MPa) yield strength grades are available as lower carbon posts, designated as Grades 50LC or 60LC. Note 18212;This specification does not cover high-strength low-alloy (HSLA) post. Refer to Specification A572/A572M for HSLA. For structural Grade 36, refer to Specification A36/A36M. 1.2 Units8212;The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Flanged Steel U-Channel Posts

YB/T 4262-2011 钢筋混凝土用钢筋桁架

本标准规定了钢筋混凝土用钢筋桁架的术语和定义、分类与标记、订货内容、技术要求、试验方法、检验规则、包装标志及质量证明书。 本标准适用于采用冷轧带肋钢筋、热轧带肋钢筋以电阻焊接方式制造的钢筋桁架，采用其他类别钢筋焊接而成的钢筋桁架可参考使用。 本标准适用于工业与民用建筑及一般构筑物、高速铁路等领域。

Lattice girder for the reinforcement of concrete

YB/T 4261-2011 耐火热轧H型钢

本标准规定了耐火热轧H型钢的牌号、订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书等。 本标准适用于具有耐火性能的结构用热轧H型钢（以下简称H型钢）。

Hot rolled fire-resistant H section steel

BS 2853:2011 起重机块用钢制高空跑道梁的试验用规范

This British Standard specifies requirements for the testing of fixed overhead runway beams made from rolled steel sections. This British Standard applies to the runway beams and their components only.It does not apply to supporting structures,travelling trolleys or lifting appliances operating on the beams,nor to runway beas for cranes that run on rails.

Specification for the testing of steel overhead runway beams for hoist blocks

GSO EN 14195:2011 石膏板系统的金属框架组件 定义、要求和测试方法

This European Standard specifies the characteristics of metal framing components intended to be used in building construction works in conjunction with gypsum plasterboard conforming to prEN 520 where the assembly is non-loadbearing. These include, for example, partitions, wall and ceiling linings and the cladding of beams, columns, ducts and lift shafts. It covers the following performance characteristics : reaction to fire, flexural (yield) strength to be measured according to the corresponding European test methods. It defines the reference test methods for technical specifications. It provides for the evaluation of conformity of the product to this European Standard. This EN also covers additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry and the reference tests for these characteristics. A method of designation has been incorporated to cover the multiplicity of metal sections currently in use, without recourse to a means of rationalisation of their shape, profile or dimensions. This standard does not cover load-bearing steel framing components.

Metal framing components for gypsum plasterboard systems - Definitions, requirements and test methods

JIS G 3353:2011 一般结构物用轻型焊接H型钢

Welded light gauge steel H sections for general structure

ABNT NBR 15980-2011 结构用轧制型钢 尺寸和公差

This Standard standardizes the dimensions and tolerances of hot rolled profi les for structural use.

Rolled steel shapes for structural use - Dimensions and tolerances

SNI 2610-2011 H型钢（Bj P H型钢）

Baja profil H (Bj P H-beam)

DS/EN 10163-3:2010 热轧钢板、宽扁钢和型钢表面状态交货要求第3部分：型材

This Part 3 in addition to Part 1 of this European Standard specifies the delivery requirements for surface condition of sections to which the European Standards mentioned in clause 2 apply and applies to all surfaces excluding edges.NOTE In this European Standard section toes (see EN 10055) are considered as part of the surfaces of a section.

Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections

JIS G 3192 AMD 1:2010 热轧型钢的尺寸、质量和容许偏差

Dimensions, mass and permissible variations of hot rolled steel sections (Amendment 1)

GOST 24045-2010 建筑用梯形波纹钢板冷弯部分.规范

Steel sheet cold-formed sections with trapezoidal corrugations for building. Specifications

ASTM A276-10 不锈钢钢筋和型材的标准规范

1.1 This specification covers hot-finished or cold-finished bars except bars for reforging (Note 1). It includes rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels. The free-machining types (Note 2) for general corrosion resistance and high-temperature service are covered in a separate specification. Note 18212;For bars for reforging, see Specification A314. Note 28212;For free-machining stainless bars designed especially for optimum machinability, see Specification A582/A582M. Note 38212;There are standards covering high nickel, chromium, austenitic corrosion, and heat resisting alloy materials. These standards are under the jurisdiction of ASTM Subcommittee B02.07 and may be found in Annual Book of ASTM Standards, Vol. 02.04. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Stainless Steel Bars and Shapes

KS D 3589-2009 聚乙烯镀层钢管

이 표준은 가스, 기름, 물 등의 수송에 사용하는 것으로서, 주로 지중1) 매설용의 바깥면

Extruded polyethylene coated steel pipes