共找到 97 条与 有色金属产品综合 相关的标准,共 7 页
Technical regulations for disease assessment of movable cultural relics Metallic cultural relics
1.1 This practice covers a system for designating die casting alloys of zinc, tin and lead. Those designations currently being used in specifications under the jurisdiction of Committees B02 on Nonferrous Metals are listed in 8201;Table X2.1 in Appendix X2. Note 1: The alloy designations now being used in Committee B07 specifications for aluminum and aluminum-alloy wrought and cast products conform to ANSI H35.1. Alloys formerly codified by this practice and the corresponding ANSI designations are shown in Tables X3.1 and X3.2 of Appendix X3 for legacy purposes. Note 2: The alloy designations now being used in Committee B07 specifications for magnesium and magnesium-alloy wrought and cast products conform to Practice B951, as indicated in Appendix X4. Alloy designations formerly codified by this practice are no longer relevant. 1.2 The equivalent Unified Numbering System (UNS) alloy designations shown in the appendixes are in accordance with Practice E527.
Standard Practice for Codification of Certain Zinc, Tin and Lead Die Castings
本标准规定了氰化堆浸提金工艺安全生产的基本要求和作业技术。本标准适用于氰化堆浸提金工艺的生产及现场试验。
The safety technical specification for gold heap leaching process
本标准规定了含金矿石全泥氰化浸金试验的技术要求。本标准适用于含金矿石全泥氰化浸金试验。
Technical specification for test work of whole ore gold leaching with cyanide
本标准规定了金矿石磨矿功指数的测定方法。本标准适用于金矿石磨矿功指数的测定试验。本标准仅适用于球磨磨矿功指数的测定。
Testing procedure of grinding work index of gold-bearing ore
本标准规定了炭浆工艺金回收率的计算方法。本标准适用于金矿石、浮选金精矿或经焙烧、生物氧化及其他工艺预处理后的含金物料氰化炭浆工艺金理论回收率的计算。本标准也适用于树脂矿浆工艺金理论回收率的计算。
Calculation of gold recovery rate for CIP Process
Beryllium bronze strips and tapes. Specifications
本标准规定了铝熔体在线除气、过滤的装置要求、生产工艺要求、熔体质量控制要求。本标准适用于铝熔体在线除气、过滤。
Technical specification for process of on-line degassing and filtering for aluminium and aluminium alloy melts
本标准规定了铝合金建筑用隔热型材穿条复合工艺的术语和定义、设备要求、基材质量要求、生产工艺要求及产品质量控制、本标准适用于建筑用穿条式铝合金隔热型材、本标准不适用于建筑用浇注式铝合金隔热型材、
Technical specification for assembling process of architecture aluminium alloy profiles with thermal barrier strip
本标准规定了散装浮选铜精矿中伴生金、银分析的取样、制样方法。 本标准适用于散装浮选铜精矿中伴生金(1g/t-15g/t)、银(≤2000g/t)分析的取制样,适用范围:Au:1g/t-15g/t,Ag:≤2000g/t。金、银含量不在其范围内的铜精矿参照此方法执行。
The methods of sampling and assaying for gold and silver content in the bulk flotation copper concentrates
Rough castings of heavy metal alloys - Sand mouldings - General tolerances, machining allowances; inactive for new design
Настоящий стандарт распространяется на детали, изделия, полуфабрикаты и заготовки из цветных металлов и сплавов и устанавливает требован
Pieces, products, semi-finished products and billets of non-ferrous metals and alloys. Grade designation
Настоящий стандарт устанавливает правила маркировки заготовок и полуфабрикатов из цветных металлов и их сплавов. Настоящий стандарт не р
Billets and semiproducts of nonferrous metals and their alloys. Marking
本标准适用于往复连杆之含金属线填料(以下简称填料)。
Packing Material with Metallic Wire
本标准适用于往复连杆、旋转杆 、阀杆柱塞等紧密用之可挠性金属填料。(以下简称填料)。
Flexible Metallic Packing Material
Rough castings of light metal alloys; gravity die castings; general tolerances, machining allowances
Light metal alloy raw castings; gravity die castings; general tolerances, machining allowances
Настоящий стандарт устанавливает требования к отбору проб для испытания на растяжение полуфабрикатов из цветных металлов и их сплавов, и
Half-finished products out of non-ferrous metals and their alloys. Sampling for tensile test
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号