79.060.01 木基板材综合 标准查询与下载

DIN CEN/TS 15534-1:2007 木塑复合材料(WPS).第1部分:木塑复合材料和产品特征的试验方法

Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products; German version CEN/TS 15534-1:2007

DIN CEN/TS 15534-2:2007 木塑复合材料(WPS).第2部分:木塑复合材料特征

Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials; German version CEN/TS 15534-2:2007

DIN CEN/TS 15534-3:2007 木塑复合材料(WPS).第3部分:木塑复合材料产品的特征

Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products; German version CEN/TS 15534-3:2007

DD CEN/TS 15534-1:2007 木塑复合材料（WPC） 第1部分：WPC材料及制品特性测试方法

This Technical Specification specifies test methods and their relevant parameters and test conditions to be used in determining selected properties of wood-plastics composites, usually called WPC, materials and products. It is applicable to cellular or non-cellular WPC materials processed through plastics processing techniques, as defined in Clause 3. The properties have been selected from the test methods usually used in the plastics and wood fields. These test methods are primarily intended to be used for the characterisation of WPC materials (see CEN/TS 15534-2 [1]) and WPC products (see CEN/TS 15534-3 [2]). NOTE This document may be revised when other parts of CEN/TS 15534 are being amended or added. The purpose of this document is to provide test methods to assess a wide range of performance characteristics for WPC materials and products. But, all the characteristics listed in this part of CEN/TS 15534 are not necessarily to be assessed for a given application. This Technical Specification takes into account the current state of the art and is intended to be used by WPC material suppliers and converters. No limitation has been introduced for the content of cellulosic materials.

Wood-plastics composites (WPC) — Part 1: Test methods for characterisation of WPC materials and products

BS DD CEN/TS 15534-3:2007 木塑复合材料(WPS).木塑复合产品特征

This Technical Specification identifies the required and optional properties of wood-plastics composite (WPC) products. It is intended to be used as a basis for the specifications of WPC products. This part is applicable to WPC products intended to be used as decking and siding. NOTE Other applications may be covered when this document will be revised.

Wood-plastics composites (WPC) - Characterisation of WPC products

BS DD CEN/TS 15534-1:2007 木塑复合材料(WPS).木塑复合材料和产品特征试验方法

This Technical Specification specifies test methods and their relevant parameters and test conditions to be used in determining selected properties of wood-plastics composites, usually called WPC, materials and products. It is applicable to cellular or non-cellular WPC materials processed through plastics processing techniques, as defined in Clause 3. The properties have been selected from the test methods usually used in the plastics and wood fields. These test methods are primarily intended to be used for the characterisation of WPC materials (see CEN/TS 15534-2 [1]) and WPC products (see CEN/TS 15534-3 [2]). NOTE This document may be revised when other parts of CEN/TS 15534 are being amended or added. The purpose of this document is to provide test methods to assess a wide range of performance characteristics for WPC materials and products. But, all the characteristics listed in this part of CEN/TS 15534 are not necessarily to be assessed for a given application. This Technical Specification takes into account the current state of the art and is intended to be used by WPC material suppliers and converters. No limitation has been introduced for the content of cellulosic materials.

Wood-plastics composites (WPC) - Test methods for characterisation of WPC materials and products

BS DD CEN/TS 15534-2:2007 木塑复合材料(WPS).木塑复合材料特征

This Technical Specification identifies the required and optional properties of wood-plastics composite (WPC) materials. It is intended to be used as a basis for the specifications of WPC materials.

Wood-plastics composites (WPC) - Characterisation of WPC materials

DD CEN/TS 15534-2:2007 木塑复合材料（WPC） 第2部分：WPC材料的表征

This Technical Specification identifies the required and optional properties of wood-plastics composite (WPC) materials. It is intended to be used as a basis for the specifications of WPC materials.

Wood-plastics composites (WPC) — Part 2: Characterisation of WPC materials

DD CEN/TS 15534-3:2007 木塑复合材料（WPC） 第3部分：WPC制品的表征

This Technical Specification identifies the required and optional properties of wood-plastics composite (WPC) products. It is intended to be used as a basis for the specifications of WPC products. This part is applicable to WPC products intended to be used as decking and siding. NOTE Other applications may be covered when this document will be revised.

Wood-plastics composites (WPC) — Part 3: Characterisation of WPC products

CSA O325-2007(C2012) 中间建筑涂料

1 Domaine d'application 1.1 Cette norme de produits volontaire énonce les exigences structurales qui permettent d'évaluer l'acceptabilité des panneaux structuraux dérivés du bois utilisés comme revêtement intermédiaire de construction et pour la construction de planchers simples et fournit aux producteurs, aux distributeurs et aux utilisateurs de ces produits des critères permettant une compréhension identique par tous. La norme n'aborde pas les questions qui ne sont pas d'ordre structural comme la résistance aux agents biologiques. Les produits utilisés à d'autres fins que le revêtement intermédiaire de construction et la construction de planchers simples peuvent nécessiter des évaluations techniques additionnelles qui ne sont pas abordées dans ce document. 1.2 Cette norme traite de la tenue en service, de la résistance au décollement, de la fabrication et de la qualité d'exécution des panneaux, des dimensions et des tolérances, des marquages et de la teneur en eau des panneaux structuraux. 1.3 Cette norme énonce des méthodes d'essai visant à déterminer la conformité et contient un glossaire des termes utilisés dans l'industrie et des définitions. La norme contient aussi un programme de certification de la qualité en vertu duquel des organismes de mise à l'essai qualifiés inspectent, prélèvent des échantillons et mettent à l'essai des produits pour les qualifier selon cette norme. Des renseignements visant les pratiques de l'industrie en ce qui a trait aux nouvelles inspections sont présentés à l'appendice A. 1.4 Dans cette norme les grandeurs sont exprimées selon les unités du système international d'unités (SI) de même que selon les unités anglosaxonnes. Les grandeurs exprimées en unités SI constituent la norme. Les valeurs entre parenthèses sont données à titre d'information seulement. Si les unités anglosaxonnes sont converties et s'il n'est pas absolument nécessaire que les valeurs soient exactes, par exemple l'espacement de clouage, les valeurs SI indiquées sont arrondies à un chiffre plus pratique. Si la précision est de rigueur, par exemple pour l'épaisseur d'un panneau, les conversions aux valeurs SI sont exactes. En ce qui a trait aux pièces de conception spéciales, les dimensions réelles sont exprimées en unités SI. 1.5 Dans cette norme, les notes ne constituent pas une partie obligatoire.

Intermediate construction coatings

PD CEN/TS 15534-2:2007 木塑复合材料(WPS).第2部分:木塑复合材料特征

This Technical Specification identifiesThe required and optional properties of wood-plastics composite (WPC) materials. It is intended to be used as a basis forThe specifications of WPC materials.

Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials

PD CEN/TS 15534-1:2007 木塑复合材料(WPS).第1部分:WPC材料和制品的特性用试验方法

This Technical Specification specifies test methods and their relevant parameters and test conditions to be used in determining selected properties of wood-plastics composites, usually called WPC, materials and products. It is applicable to cellular or non-cellular WPC materials processed through plastics processing techniques, as defined in Clause 3. The properties have been selected from the test methods usually used in the plastics and wood fields. These test methods are primarily intended to be used for the characterisation of WPC materials (see CEN/TS 15534-2 [1]) and WPC products (see CEN/TS 15534-3 [2]). NOTE This document may be revised when other parts of CEN/TS 15534 are being amended or added. The purpose of this document is to provide test methods to assess a wide range of performance characteristics for WPC materials and products. But, all the characteristics listed in this part of CEN/TS 15534 are not necessarily to be assessed for a given application. This Technical Specification takes into account the current state of the art and is intended to be used by WPC material suppliers and converters. No limitation has been introduced for the content of cellulosic materials.

Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products

ASTM D7033-07 定向刨花板（OSB）木基结构用板材设计能力确定的标准实施规程

The procedures described in this practice are intended to be used to establish design capacity (both strength and stiffness) values based on testing of OSB that, at a minimum, satisfies the performance requirements of PS-2. Review and reassessment of values derived from this practice shall be conducted on a periodic basis. If a change is found to be significant, retesting or reevaluation, or both, in accordance with the procedures of this practice shall be considered.1.1 This practice covers the basis for code recognition of design capacities for OSB structural-use panels. Procedures are provided to establish or re-evaluate design capacities for OSB structural-use panels. Procedures for sampling and testing are also provided. Design values stated as capacity per unit dimension are to be regarded as standard. Design capacities developed in accordance with this practice are applicable to panels intended for use in dry in-service conditions.Note 18212;This practice is based on ICC-ES Acceptance Criteria AC-182. Relative to the scope of AC-182, this practice is limited to OSB panels.Note 28212;While this practice makes reference to PS-2, this practice applies similarly to products certified to other standards such as CAN/CSA O325.Note 38212;OSB produced under PS-2 is rated with the "Exposure 1" bond classification. Exposure 1 panels covered by PS-2 are intended for dry use applications where the in-service equilibrium moisture content conditions are expected to be less than 16 %. Exposure 1 panels are intended to resist the effects of moisture due to construction delays, or other conditions of similar severity. Guidelines on use of OSB are available from manufacturers and qualified agencies.

Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels

ASTM D3737-07 建立结构胶合层压木材允许性能的标准实践（胶合）

1.1 This practice covers the procedures for establishing allowable properties for structural glued laminated timber. Included are the allowable stresses for bending, tension and compression parallel to the grain, horizontal shear, compression perpendicular to the grain, and radial tension and compression in curved members. Also included are modulus of elasticity and modulus of rigidity.1.2 This practice is limited to the calculation of allowable properties subject to the given procedures for the selection and arrangement of grades of lumber of the species considered.1.3 Requirements for production, inspection and certification are not included, but in order to justify the allowable properties developed using procedures in this practice, manufacturers must conform to recognized manufacturing standards. Refer to ANSI/AITC A190.1 and CSA 0122.1.4 The values stated in inch-pound units are to be regarded as standard.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)

CSA O325-2007(R2012) 建筑护套

This CSA Standard is based on NIST (National Institute of Standards and Technology) Voluntary Product Standard PS 2, Performance Standard for Wood-Based Structural-Use Panels (December 2004). 1. SCOPE 1.1. This Voluntary Product Standard primarily establishes structural criteria for assessing the acceptability of wood-based structural-use panels for construction sheathing and single-floor applications and provides a basis for common understanding among the producers, distributors, and the users of these products. The standard does not address non-structural issues such as resistance to biological agents. Applications other than construction sheathing and single-floor sheathing may require additional engineering considerations that are not covered by this document. 1.2. This Standard covers the performance requirements, adhesive bond performance, panel construction and workmanship, dimensions and tolerances, marking and moisture content of structural-use panels. 1.3. This Standard includes test methods to determine compliance and a glossary of trade terms and definitions. A quality certification program is provided whereby qualified testing agencies inspect, sample, and test products for qualification under this Standard. Information regarding industry practices for reinspection is provided in Appendix A. 1.4. This Standard incorporates the International System of Units (SI) as well as customary units of measurement. The values given in SI units are the standard. The values given in parentheses are for information only. In conversion of customary units where exact placement is not an issue, such as nail spacing, approximate conversions to SI units are made to yield more easily recognizable numbers. In critical matters, such as panel thickness, exact conversions to SI units are made. For nominal customary units, actual dimensions in SI units are given. 1.5. Advisory notes in this Standard shall not be considered mandatory.

Construction sheathing

KS M 7084-2006 的木屑和锯末水分测定法（甲苯法）

Testing method for moisture in wood chips and sawdusts(Toluene method)

DS/EN 13986:2006 建筑用人造板 特性、合格评定和标记

This European Standard defines wood-based panels for use in construction and specifies the relevant characteristics and the appropriate test methods to determine these characteristics for wood-based panels unfaced, overlaid veneered or coated.

Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

KS F ISO 16983:2006 木质板材.浸水后厚度膨胀的测定

이 규격은 목질 판재(1)의 흡수 두께 팽창율 측정 방법에 대하여 규정하며, 이 시험 방법

Wood-based panels-Determination of swelling in thickness after immersion in water

KS F ISO 16998:2006 木质板材.耐湿测定.煮沸试验

이 규격은 습한 환경에서 사용될 수 있도록 내수 접착제로 제조된 목질 판재(1)의 삶음 처

Wood-based panels-Determination of moisture resistance-Boil test

KS F ISO 16987-2006(2011) 根据木材板方法的冷热重复条件耐水性试验

Wood-based panels－Determination of moisture resistance under cyclic test conditions