纤维和刨花板标准-分析测试百科网

BS PD CEN/TS 16368:2014 轻质刨花板. 规范

Lightweight Particleboards. Specifications

ICS: 79.060.20
CCS: B70
发布: 2014-04-30
实施: 2014-04-30

DIN CEN/TS 16526:2014 家具夹芯板(SWB-F).工厂制产品.性能特性测定的定义、分类和试验方法.德文版本CEN/TS 16526-2013

Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristics; German version CEN/TS 16526:2013

ICS: 79.060.20
CCS: Y82
发布: 2014-03
实施

PD CEN/TS 16368:2014 轻质刨花板规格

This European Technical Specification specifies the requirements for uncoated particleboards for use in dry conditions in non load-bearing applications with density below 600 kg/m3. This Technical Specification applies to particleboard which is mostly homogenous and continuous in its composition and which does not contain hollow spaces, chambers or other type of cavities which can be encountered as honeycombs in sandwich panels or as tubes in extruded boards. This Technical Specification does not give requirements for extruded particleboards (see EN 14755), flaxboards (see EN 15197) and sandwich panels. NOTE Typical applications for lightweight boards are in furniture and non-structural applications e. g. in doors, packaging.

Lightweight Particleboards - Specifications

ICS: 79.060.20
CCS
发布: 2014-03
实施

GOST 10632-2014 木质碎料板. 规格

Wood particle boards. Specifications

ICS: 79.060.20
CCS
发布: 2014
实施: 2015-07-01

GOST 32687-2014 采用干燥生产法层压浸渍有热固树脂的纸制成的纤维板. 规格

Fiberboards of a dry method of production, laminated with paper impregnated with thermosetting resins. Specifications

ICS: 79.060.20
CCS
发布: 2014
实施: 2015-07-01

GOST 8904-2014 硬木纤维板的涂料和清漆涂层. 规格

Hard wood-fibre boards varnish and paint coatings. Specificafications

ICS: 79.060.20
CCS
发布: 2014
实施: 2015-07-01

GOST 32716-2014 基于深程度或树脂固化浸渍纸的覆面材料. 规格

Facing material based on impregnated papers with a deep degree or resin cure. Specifications

ICS: 79.060.20
CCS
发布: 2014
实施: 2015-07-01

GOST 27678-2014 木基人造板和胶合板. 测定甲醛含量的穿孔方法

Wood-based panels and plywood. Perforatory method for determination of formaldehyde content

ICS: 79.060.20
CCS
发布: 2014
实施: 2016-01-01

ASTM E1333-14 采用大型腔室测定空气中木制品的甲醛浓度及其排放率的标准试验方法

4.1 Significance and Use: 4.1.1 Limitations on formaldehyde concentrations in air have been established for some building products permanently installed in manufactured and conventional homes. This test method provides a standard means of testing typical product sizes, such as 1.2 by 2.48201;m (4 by 88201;ft) sheets, at product loadings consistent with product end use. 4.2 Summary of Test Method: 4.2.1 This test method incorporates a chamber of 228201;m3 (8008201;ft3) minimum size to evaluate formaldehyde concentrations in air and emission rates from building products over a specified duration of time. This test method employs a single set of environmental conditions but different product loading ratios to assess formaldehyde concentrations in air and emission rates from certain wood products. Conditions controlled in the procedure are as follows: 4.2.1.1 Conditioning of specimens prior to testing, 4.2.1.2 Exposed surface area of the specimens in the test chamber, 4.2.1.3 Test chamber temperature and relative humidity, 4.2.1.4 Number of air changes per hour, and 4.2.1.5 Air circulation within the chamber. 4.2.1.6 At the end of a 16 to 20-h8201;period in the test chamber, the air is sampled and the concentration of formaldehyde in air and emission rate are determined. Note 3: Care must be exercised in the extension of the results to formaldehyde concentrations in air and emission rates from products under different conditions of air change rate or loading ratio, or both. 1.1 This test method measures the formaldehyde concentration in air and emission rate from wood products containing formaldehyde under conditions designed to simulate product use (see 11.5 and Note 9). The concentration in air and emission rate is determined in a large chamber under specific test conditions of temperature and relative humidity. The general procedures are also intended for testing product combinations at product-loading ratios and at air-exchange rates typical of the indoor environment (1).2 The products tested, the loading ratios and the air exchange rates employed are described in the test report. 1.2 This test method determines the average formaldehyde concentration in air and emission rate from a number of large size samples. T......

Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber