共找到 129 条与 其他木基板材 相关的标准,共 9 页
本文件界定了结构用集成材的术语、定义和符号,规定了结构用集成材的要求、检验方法、检验规则与产品标识等。 本文件适用于结构用集成材。
Structural glued laminated timber
Structural laminated bamboo sliver curtain lumber
Bamboo winding composite pipe
Code of glued laminated timber production
Laminated impregnated paper strawboard composite flooring
Test methods for volatile content of ultraviolet curable coatings for wood products
Glued laminated bamboo flooring
本标准规定了热固性树脂浸渍纸高压装饰层积板的术语和定义、分类、要求、检验方法、检验规则以及标志、包装、运输和贮存。本标准适用于热固性树脂浸渍纸高压装饰层积板。
High-pressure decorative laminates.Sheets made from thermosetting resins
本标准规定了重组装饰单板的术语和定义、分类、要求、试验方法、检验规则以及包装、标志、运输和贮存。 本标准适用于重组装饰材加工而成的重组装饰单板。 本标准不适用于集成单板。
Multilaminar decorative veneer
本标准规定了重组装饰材的术语和定义、分类、要求、检量和试验方法、检验规则以及包装、标志、运输和贮存等。 本标准适用于采用经调色处理的单板为主要原材料以重组胶合方式生产的装饰板方材。 本标准不适用于集成材。
Multilaminar decorative lumber
本标准规定了结构用集成材的术语和定义、最低性能和生产要求,物理化学性能试验方法以及产品标识方法。 本标准给出了结构用集成材生产及质量控制方法和要求。 本标准适用于以承重为目的,将按等级区分的层板(可指接、斜接或拼宽)沿纤维方向相互平行在厚度方向层积胶合而成的结构用集成材。
Structural glued laminated timber
Polyvinyl chloride-based co-extruded bamboo plastic composite for outdoor use
Technical specification for green manufacturing of kenaf wood-based panels
本文件规定了户外竹基纤维复合材的术语和定义、分类和规格、技术要求、试验方法、检验规则、标志、包装、运输及贮存。
Outdoor bamboo based fiber composite
Zinc sulfide concentrates-Determination of zinc content-Ion-exchange and EDTA titrimetric method
This document provides information on the characteristic values for use in designing structures incorporating wood-based panels. The characteristic values given are as defined in EN 1995-1-1. This document includes the characteristic values of the mechanical properties and of the raw density for solid-wood panels complying with EN 13353:2022 technical classes SWP/1 S, SWP/2 S, SWP/3 S.
Wood-based panels - Characteristic values for structural design - Part 3: Solid wood panels
This document specifies requirements for solid wood panels as specified in EN 12775 with a maximum thickness of 80 mm for use in dry, humid and exterior conditions as specified in service classes 1, 2 and 3 of EN 1995-1-1. Additional information on supplementary properties for certain applications is given in Annex A.
Solid wood panels (SWP) - Requirements
本文件规定了结构用高强度胶合木的术语和定义、原材料要求、要求、试验方法、检验规则、包装、储存、运输的要求。
Structural high strength glulam
技术要求规定了尺寸与偏差、外观质量、理化性能、燃烧性能等级、抗菌性能。其中,理化性能包括耐磨性、耐沸水、耐干热、耐湿热、耐水蒸气、尺寸稳定性、抗小球冲击、抗大球冲击、耐开裂、耐划痕、耐污染、耐光色牢度、耐香烟灼烧、后成型、耐龟裂、弯曲强度、抗拉强度、甲醛释放量、阻燃、耐老化等要求。燃烧性能包括可燃性、单体燃烧性能和烟气毒性等级。抗菌性能包括金黄色葡萄球菌、大肠杆菌、肺炎杆菌和沙门氏菌。
Antibacterial and flame retardant high pressure decorative board
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号