81.060.20 陶瓷制品 标准查询与下载

DB21/T 3014-2018 地理标志产品 喀左紫砂

Geographical indication product Kazuo purple sand

DB13/T 2761-2018 餐（饮）具集中清洗消毒服务单位卫生规范

Hygienic Specifications for Centralized Cleaning and Disinfection Service Units for Catering (Drinking) Utensils

QB/T 2580-2018 精细陶瓷烹调器

Fine ceramic cookware

QB/T 2579-2018 普通陶瓷烹调器

本标准规定了普通陶瓷烹调器的术语和定义、产品分类、要求、试验方法、检验规则，以及标志、包装、运输、贮存。 本标准适用于普通陶瓷烹调器。

Ordinary ceramic cookware

ASTM C674-13(2018) 陶瓷白瓷材料弯曲性能的标准试验方法

1.1 These test methods cover determination of the modulus of rupture and the modulus of elasticity of fired ceramic whitewares bodies, formed by any fabrication method, and are applicable to both glazed and unglazed test specimens. 1.2 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units may be approximate. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials

ASTM C373-18 用真空法测定压制陶瓷砖和玻璃砖的吸水率和相关性能的标准试验方法以及挤压陶瓷砖和非瓷砖烧制陶瓷制品的沸腾方法

3.1 Measurement of density, porosity, and specific gravity is a tool for determining the degree of maturation of a ceramic body, or for determining structural properties that may be required for a given application. 1.1 These test methods covers procedures for determining water absorption, bulk density, apparent porosity, and apparent specific gravity of non-tile fired unglazed ceramic whiteware2 products, glazed or unglazed ceramic tiles, and glass tiles. 1.2 The values stated in metric units are normative. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not normative. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile

ASTM C1870-18 测定陶瓷砖上落球冲击直径的标准试验方法

1.1 This test method covers procedures for measuring impact properties of ceramic tile, bonded to a standardized concrete substrate, from a falling 2-in. steel ball. 1.2 This test method is intended solely for evaluating standardized laboratory test specimens and does not purport to simulate actual installed performance. 1.3 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Impact Diameter from Falling Ball on Ceramic Tile

ASTM C1161-18 环境温度下先进陶瓷弯曲强度的标准试验方法

1.1 This test method covers the determination of flexural strength of advanced ceramic materials at ambient temperature. Four-point-1⁄4-point and three-point loadings with prescribed spans are the standard as shown in Fig. 1. Rectangular specimens of prescribed cross-section sizes are used with specified features in prescribed specimen-fixture combinations. Test specimens may be 3 by 4 by 45 to 50 mm in size that are tested on 40-mm outer span four-point or three-point fixtures. Alternatively, test specimens and fixture spans half or twice these sizes may be used. The method permits testing of machined or as-fired test specimens. Several options for machining preparation are included: application matched machining, customary procedure, or a specified standard procedure. This method describes the apparatus, specimen requirements, test procedure, calculations, and reporting requirements. The test method is applicable to monolithic or particulateor whisker-reinforced ceramics. It may also be used for glasses. It is not applicable to continuous fiberreinforced ceramic composites. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature

KS G 3305-2017 瓷釉家居用品

Porcelain enameled household ware

T/ZZB 0271-2017 淡水珍珠项链

本标准规定了淡水珍珠项链的原材料要求、设计要求、加工工艺要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存和售后服务承诺。 本标准适用于淡水无核珍珠项链，不适用于淡水有核珍珠项链。 本标准适用于经过抛光、钻孔的淡水珍珠项链，可经过无荧光漂白及增光优化，不适用于经辐照、染色等处理的淡水珍珠项链。

Freshwater cultured pearl necklace

KS L 9104-2017(2022) 陶瓷纤维毯

Ceramic fiber blanket

KS L 8021-2017 热电偶用非金属绝缘管

Non metallic insulating tube for thermocouples

KS L 9104-2017 陶瓷纤维毯

Ceramic fiber blanket

KS L 8021-2017(2022) 热电偶用非金属绝缘管

Non metallic insulating tube for thermocouples

SN/T 4847-2017 卫生洁具耐急冷急热性试验方法

Test method for resistance to rapid cooling and heating of sanitary ware

T/ZZB 0155-2016 建筑外墙用水性多彩涂料

本标准规定了建筑外墙用水性多彩涂料产品的分类、基本要求、技术要求、应用要求、试验方法、检验规则、包装、标志及贮存、质量承诺等内容。 本标准适用于将水性着色胶体颗粒分散于以水性成膜物质（合成树脂乳液等）、颜填料或彩砂、水、助剂等构成的体系制成的水包水型多彩涂料。该涂料通过喷涂等工艺获得仿花岗石、天然石材等外观装饰效果，与底漆，中涂，罩光清漆等形成配套体系，主要用于建筑物外墙的装饰和保护。

Waterborne multicolor architectural coatings for exterior wall

ASTM C949-80(2016) 通过染色渗透法测定玻璃质白瓷中孔隙率的标准试验方法

1.1 This test method covers procedures for detecting pores, cracks, or other voids that may be present in otherwise impermeable whiteware ceramics, or as porosity in underfired ware. NOTE 1—This test method was partially derived from ANSI C29.1. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use

Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration

T/ZZB 0126-2016 龙泉传统艺术青瓷（弟窑）

本标准规定了龙泉传统艺术青瓷（弟窑）的作品分类、原料要求、工艺要求、生产过程基本条件要求、技术要求、艺术要求、试验方法、检验规则、包装、标志、运输及贮存和质量承诺。 本标准适用于地理标志保护浙江省龙泉市行政管辖区范围内，以瓷石和紫金土等为主要原料，以氧化铁含量较高的紫金土为着色剂，在1310 ℃左右的还原条件下烧成的弟窑类艺术青瓷。 本标准仅适用于龙泉青瓷传统经典颜色为梅子青、粉青的弟窑类作品。

Longquan traditional art’s celadon porcelain ware (di kiln)

ASTM C373-16e1 用真空法测定压制陶瓷砖和玻璃砖的吸水率和相关性能的标准试验方法以及挤压陶瓷砖和非瓷砖烧制陶瓷制品的沸腾方法

1.1 These test methods covers procedures for determining water absorption, bulk density, apparent porosity, and apparent specific gravity of non-tile fired unglazed ceramic whiteware2 products, glazed or unglazed ceramic tiles, and glass tiles. 1.2 The values stated in metric units are normative. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not normative. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile

ASTM C773-88(2016) 燃烧白色材料的压缩（粉碎）强度的标准测试方法

1.1 This test method covers two test procedures (A and B) for the determination of the compressive strength of fired whiteware materials. 1.2 Procedure A is generally applicable to whiteware products of lowto moderately high-strength levels (up to 150 000 psi or 1030 MPa). 1.3 Procedure B is specifically devised for testing of highstrength ceramics (over 100 000 psi or 690 MPa). 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials