83.040.20 橡胶合成配料 标准查询与下载

ASTM D7724-18(2023)e1 用机械冲洗法（NDM）测定炭黑不分散物质的标准试验方法

1.1 This test method covers the determination of nondispersible matter after mechanical water flushing of regular untreated carbon blacks. It may not be applicable to oil-treated carbon blacks because the oil would prevent proper wetting of the black by water. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM)

ASTM D1765-22 橡胶制品用炭黑的标准分类系统

1.1 This classification system covers the classification of rubber-grade carbon blacks by the use of a four-character nomenclature system. The first character gives some indication of the influence of the carbon black on the rate of cure of a typical rubber compound containing the black. The second character gives information on the average surface area of the carbon black. The last two characters are assigned arbitrarily. 1.2 All rubber-grade carbon blacks for which a number is currently assigned at the time of publication of this classification system are listed in Table 1 together with some of their typical properties. ASTM classification numbers (“N” or “S” designation) not listed in Table 1 have either been withdrawn or are not currently assigned. The use of inactive or unassigned N or S designations is prohibited until such a time as the designation is officially reactivated or assigned by Subcommittee D24.41 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification System for Carbon Blacks Used in Rubber Products

ASTM D8016-22 沉淀水合西尔斯值二氧化硅的标准试验方法

1.1 This test method is used to determine the number of silanol groups on the surface of silica by titration according to a method as developed by Sears. This test method is suitable for characterizing rubber-grade silicas. 1.2 Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Silica, Precipitated, Hydrated—Sears Number

ASTM D1619-22 炭黑硫含量的标准试验方法

1.1 These test methods cover the determination of the sulfur content of carbon black. The following test methods are included: Sections Test Method A High-Temperature Combustion With Infrared Absorption Detection Procedures 6 to 13 Test Method B X-Ray Fluorescence 14 to 19 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Carbon Black—Sulfur Content

ASTM D1992-17(2022) 橡胶用合成增塑剂试验的标准指南

1.1 This guide covers test methods for synthetic plasticizers that are used in rubber applications. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Testing Synthetic Plasticizers Used in Rubber

ASTM D4677-87(2022) 二氧化钛橡胶复合材料的标准分类

1.1 This classification covers the compounding material known as titanium dioxide. It is generally used in rubber compounds to impart whiteness to selected products. Typical chemical and physical properties are included. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification for Rubber Compounding Materials—Titanium Dioxide

HG/T 6044-2022 取水定额 沉淀水合二氧化硅

Water intake quota to precipitate hydrated silica

HG/T 6043-2022 取水定额 炭黑

Water intake quota carbon black

22/30458493 DC BS ISO 11235 橡胶混炼成分 亚磺酰胺促进剂 测试方法

BS ISO 11235. Rubber compounding ingredients. Sulfenamide accelerators. Test methods

BS ISO 1138:2022 橡胶配合剂 碳黑 硫含量的测定

1   Scope This document specifies two methods for the determination of the total sulfur in all types of carbon black for use in the rubber industry: — Method A, using a combustion furnace; — Method B, using an automatic analyser. With respect to safety aspects and test precision, it is preferable to use automatic systems. Method B is therefore the preferred method. Classical chemical analysis (Method A) is acceptable if automatic equipment is not available.

Rubber compounding ingredients. Carbon black. Determination of sulfur content

BS ISO 21869:2022 橡胶配合剂 氧化镁 测试方法

1   Scope This document specifies the test methods to be used for magnesium oxide intended for use in the rubber industry as a stabilizer and vulcanizing agent. The choice of the properties to be determined and the values required are subject to agreement between the interested parties.

Rubber compounding ingredients. Magnesium oxide. Methods of test

ISO 21869:2022 橡胶配合剂.氧化镁.试验方法

This document specifies the test methods to be used for magnesium oxide intended for use in the rubber industry as a stabilizer and vulcanizing agent. The choice of the properties to be determined and the values required are subject to agreement between the interested parties.

Rubber compounding ingredients — Magnesium oxide — Methods of test

ISO 1138:2022 橡胶配料.炭黑.硫含量的测定

This document specifies two methods for the determination of the total sulfur in all types of carbon black for use in the rubber industry: — Method A, using a combustion furnace; — Method B, using an automatic analyser. With respect to safety aspects and test precision, it is preferable to use automatic systems. Method B is therefore the preferred method. Classical chemical analysis (Method A) is acceptable if automatic equipment is not available.

Rubber compounding ingredients — Carbon black — Determination of sulfur content

ASTM D3849-22 用电子显微镜测定炭黑形态特征的标准试验方法

1.1 This test method covers (1) the morphological (for example, size and shape) characterization of carbon black from transmission electron microscope images which are used to derive the mean particle and aggregate size of carbon black in the dry (as manufactured) state, from CAB chip dispersion or removed from a rubber compound and (2) the certification of mean particle size using a correlation based on statistical thickness surface area measurements. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Carbon Black—Morphological Characterization of Carbon Black Using Electron Microscopy

ASTM D7771-17a(2022) 炭黑中苯并-α-芘（BaP）含量测定的标准试验方法

1.1 This test method covers the qualitative and quantitative determination of only benzo-α-pyrene (BaP), a specific polycyclic aromatic hydrocarbon (PAH), on carbon black. The procedure involves Soxhlet extraction with toluene and analysis by gas chromatography with mass spectrometry (GC/MS). This method is not intended to test for U.S. Food and Drug Administration (FDA 21 CFR 178.3297) compliance of carbon blacks used for indirect food contact applications. 1.2 Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Benzo-α-Pyrene (BaP) Content in Carbon Black

ASTM D4571-22 橡胶复合材料的标准试验方法挥发性物质的测定

1.1 These test methods cover the determination of the loss of volatile materials in various rubber chemicals based on the mass loss upon heating at 70°C. 1.2 These test methods for the determination of volatile matter include the following materials: Section Sulfur 7 – 13 p-Phenylenediamine antidegradants 14 – 21 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material

ASTM D4573-22 橡胶化学品的标准试验方法油处理硫中油含量的测定

1.1 This test method covers the determination of the amount of hydrocarbon oils added to oil-treated sulfurs. The test method is employed when the amount of oil added is 1 % or more of the total sample. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur

ASTM D4578-22 用萃取法测定橡胶化学品不溶硫百分比的标准试验方法

1.1 These test methods cover the determination of solvent insoluble materials in a sulfur sample. The two test methods available are: (1) Test Method A, Extraction by Carbon Disulfide, and (2) Test Method B, Extraction by Toluene. If there are no other solvent insoluble materials present in the sulfur, these test methods determine the insoluble sulfur content directly. If other materials are also present, additional testing is necessary to identify what portion of the insolubles is insoluble sulfur. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For a specific warning, see 5.1. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Rubber Chemicals—Determination of Percent Insoluble Sulfur by Extraction

ISO 5794-1:2022 橡胶配合剂.沉淀水合二氧化硅.第1部分:非橡胶试验

This document specifies methods of test for characterizing precipitated hydrated silica for use as a rubber compounding ingredient. This document specifies the test formulation, mixing equipment, mixing procedure and methods of test for use in determining the physical properties of styrene-butadiene rubber compounded with precipitated hydrated silica.

Rubber compounding ingredients — Silica, precipitated, hydrated — Part 1: Non-rubber tests

ASTM D4574-22 橡胶复合材料的标准试验方法灰分含量的测定

1.1 These test methods cover the determination of ash content of rubber chemicals. 1.2 The test methods include the following materials: Material Section Sulfur 7 – 13 p-Phenylenediamine Antioxidants 14 – 22 Benzothiazole Sulfenamide Accelerators 14 – 22 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content