83.040.20 橡胶合成配料 标准查询与下载

ASTM D1508-23 炭黑、颗粒细粒和损耗的标准试验方法

1.1 This test method covers the determination of the fines and attrition of pelleted carbon black. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Carbon Black, Pelleted Fines and Attrition

ASTM D1937-23 炭黑颗粒质量强度的标准试验方法

1.1 This test method covers the determination of the mass strength of pelleted carbon black. It is designed to determine the force required to pack a cylindrical column of pelleted carbon black. The results of this test are believed to relate to the ability of the carbon black to flow in bulk handling systems. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Carbon Black, Pelleted—Mass Strength

ASTM D4122-17(2023) 工业参考炭黑的炭黑评定标准实施规程

1.1 This practice covers guidelines for the production and testing for uniformity of a lot of carbon black to be used as an Industry Reference Black (IRB). 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Carbon Black—Evaluation of an Industry Reference Black

ASTM D1765-23a 橡胶制品中使用的炭黑的标准分类系统

1.1 This classification system covers the classification of rubber-grade carbon blacks by the use of a four-character nomenclature system. The first character gives some indication of the influence of the carbon black on the rate of cure of a typical rubber compound containing the black. The second character gives information on the average surface area of the carbon black. The last two characters are assigned arbitrarily. 1.2 All rubber-grade carbon blacks for which a number is currently assigned at the time of publication of this classification system are listed in Table 1 together with some of their typical properties. ASTM classification numbers (“N” or “S” designation) not listed in Table 1 have either been withdrawn or are not currently assigned. The use of inactive or unassigned N or S designations is prohibited until such a time as the designation is officially reactivated or assigned by Subcommittee D24.41 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification System for Carbon Blacks Used in Rubber Products

ASTM D1514-23 炭黑筛余物的标准试验方法

1.1 This test method covers the determination of the water wash sieve residue in regular untreated carbon blacks. It may not be applicable to oil-treated carbon blacks because the oil would prevent proper wetting of the black by water. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 6. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Carbon Black—Sieve Residue

T/CSTM 00865-2023 金属加工液用消泡剂 消抑泡性能的测试方法

本文件规定了金属加工液行业用消泡剂消抑泡性能测试的术语和定义、原理、一般规定、试剂和材 料、仪器和设备、性能测试、结果计算和数据处理及允许差。  本文件适用于金属加工液行业用消泡剂消抑泡性能的测试。 

Defoamer for metalworking fluid industry—Test method for defoaming and

T/CSTM 00861-2023 橡胶助剂 预分散母胶粒 ZEHBP-50

本文件规定了橡胶助剂预分散母胶粒ZEHBP-50的术语和定义、分类和编码、技术要求、试验方法，检验规则和标志、包装、贮存、运输。 本文件适用于橡胶助剂预分散母胶粒ZEHBP-50（以下简称产品）的质量检验。

Rubber additives—Predispersed masterbatch—ZEHBP-50

T/CSTM 00864-2023 橡胶助剂 预分散母胶粒 多硫化物硅烷偶

本文件规定了橡胶助剂预分散母胶粒多硫化物硅烷偶联剂 Si17-50 的术语和定义、分类和编码、 技术要求、实验方法、检验规则，以及标志、包装、运输和贮存等内容。  本文件适用于橡胶助剂预分散母胶粒多硫化物硅烷偶联剂 Si17-50（以下简称产品）的检验。

Rubber additives—Predispersed masterbatch—Polysulfide silane coupling agent

T/CSTM 00866-2023 工业发酵用消泡剂 消抑泡性能的测试方法

本文件规定了工业发酵行业用消泡剂消抑泡性能的测试方法。 本文件适用于工业发酵行业使用的消泡剂的消抑泡性能的测试。

Defoamer for fermentation industry—Test method for defoaming and antifoaming performance

T/CSTM 00867-2023 充油型不溶性硫磺分散性能的等级及评价方法

本文件规定了充油型不溶性硫磺在橡胶混合胶料中分散性能的等级及评价方法。 本文件适用于评价充油型不溶性硫磺在橡胶混合胶料中的分散性能。

Dispersibility grade and evaluation method of oil-treated insoluble sulfur

T/QGCML 625-2023 易混再生橡胶

本标准规定了易混再生橡胶的术语和定义、命名与分类、技术要求、检验方法、检验规则、标志、包装、运输和贮存。      本标准适用于易混再生橡胶的生产及检验。

Mixable recycled rubber

ASTM D3265-23 炭黑着色强度的标准试验方法

1.1 This test method covers the determination of the tint strength of carbon black relative to an industry tint reference black (ITRB). 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Carbon Black—Tint Strength

ASTM D1513-05(2023) 炭黑颗粒浇注密度的标准试验方法

1.1 This test method covers the determination of the pour density of pelleted carbon blacks. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Carbon Black, Pelleted—Pour Density

ASTM D1511-12(2023) 炭黑颗粒尺寸分布的标准试验方法

1.1 This test method covers the determination of the pellet size distribution of carbon black. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Carbon Black—Pellet Size Distribution

ASTM D1765-23 橡胶制品中使用的炭黑的标准分类系统

Standard Classification System for Carbon Blacks Used in Rubber Products

ASTM D7724-18(2023)e1 用机械冲洗法（NDM）测定炭黑不分散物质的标准试验方法

1.1 This test method covers the determination of nondispersible matter after mechanical water flushing of regular untreated carbon blacks. It may not be applicable to oil-treated carbon blacks because the oil would prevent proper wetting of the black by water. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM)

ASTM D1509-18(2023) 炭黑热损失的标准试验方法

1.1 These test methods cover the determination of the heating loss of carbon black at 125°C. This heating loss consists primarily of moisture, but other volatile materials may also be lost. These test methods are not applicable to treated carbon blacks that contain added volatile materials, if moisture loss is to be measured. 1.2 These test methods may also be used for the determination of the heating loss of recovered carbon fillers (rCF/rCB) at 125°C. However, these materials were not included in the precision studies and therefore, the precision statements contained in this standard may not be valid for these materials. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Carbon Black—Heating Loss

ASTM D4527-18(2023) 炭黑溶剂提取物的标准试验方法

1.1 This test method covers the procedure for measuring carbon black solvent extractables. 1.1.1 This test method determines the total material extracted from carbon black by toluene under specified conditions. The procedure is also applicable to other solvents such as cyclohexane, etc. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For a specific precautionary statement, see Section 7. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Carbon Black—Solvent Extractables

ASTM D1765-22 橡胶制品用炭黑的标准分类系统

1.1 This classification system covers the classification of rubber-grade carbon blacks by the use of a four-character nomenclature system. The first character gives some indication of the influence of the carbon black on the rate of cure of a typical rubber compound containing the black. The second character gives information on the average surface area of the carbon black. The last two characters are assigned arbitrarily. 1.2 All rubber-grade carbon blacks for which a number is currently assigned at the time of publication of this classification system are listed in Table 1 together with some of their typical properties. ASTM classification numbers (“N” or “S” designation) not listed in Table 1 have either been withdrawn or are not currently assigned. The use of inactive or unassigned N or S designations is prohibited until such a time as the designation is officially reactivated or assigned by Subcommittee D24.41 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification System for Carbon Blacks Used in Rubber Products

ASTM D1619-22 炭黑硫含量的标准试验方法

1.1 These test methods cover the determination of the sulfur content of carbon black. The following test methods are included: Sections Test Method A High-Temperature Combustion With Infrared Absorption Detection Procedures 6 to 13 Test Method B X-Ray Fluorescence 14 to 19 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Carbon Black—Sulfur Content