83.040.20 橡胶合成配料 标准查询与下载

ASTM D3191-10(2020) 丁苯橡胶（苯乙烯-丁二烯橡胶）和#x2014中炭黑的标准试验方法；配方和评估程序

1.1 These test methods cover the standard materials, test formula, mixing procedure, and test methods for the evaluation and production control of carbon blacks in styrene butadiene rubber (SBR). 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures

ASTM D4821-20 炭黑标准指南&8212；试验方法精密度和偏差的验证

1.1 This guide covers procedures for using the ASTM Standard Reference Blacks2 (SRBs) and the HT and INR Iodine Number Standards to continuously monitor the precision of those carbon black test methods for which reference values have been established. It also offers guidelines for troubleshooting various test methods. 1.2 This guide defines the environmental conditions that are required for laboratories that perform carbon black testing activities for those test methods under D24’s jurisdiction. 1.3 This guide establishes procedures for the use of x-charts to continuously monitor those tests listed in Section 2 for within-lab precision (repeatability) and between-lab accuracy (reproducibility). 1.4 This guide provides a statistical procedure for improving test reproducibility when a laboratory cannot physically calibrate its apparatus to obtain the reference values of the ASTM reference blacks, within the ranges given in this guide. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Carbon Black—Validation of Test Method Precision and Bias

ASTM D1506-15(2020) 炭黑的标准试验方法&x2014；灰分

1.1 These test methods cover the determination of the ash content of carbon black. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements see Sections 6 and 13. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Carbon Black—Ash Content

KS M ISO 1306-2019 橡胶配合料 炭黑（粒状） 浇注密度的测定

Rubber compounding ingredients－Carbon black (pelletized)－Determination of pour density

KS M ISO 4652-2019 橡胶配合剂 炭黑 氮气吸附法测定比表面积 单点法

Rubber compounding ingredients — Carbon black — Determination of specific surface area by nitrogen adsorption methods — Single-point procedures

KS M ISO 3858-2019 橡胶复合成分 - 炭黑 - 甲苯提取物透光率的测定

Rubber compounding ingredients — Carbon black —Determination of light transmittance of toluene extract

KS M ISO 3858:2019 橡胶复合成分 - 炭黑 - 甲苯提取物透光率的测定

Rubber compounding ingredients — Carbon black —Determination of light transmittance of toluene extract

HG/T 3072-2019 橡胶配合剂 沉淀水合二氧化硅 吸油值的测定

Determination of oil absorption value of rubber compound precipitated hydrated silica

T/ZZB 1420-2019 亲水型气相二氧化硅

本标准规定了亲水型气相二氧化硅的规格、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本标准适用于由卤代硅烷在高温火焰中水解而生成的，未经有机物表面改性的非晶质二氧化硅。

Hydrophilic fumed silica

ASTM D1991-15(2019) 橡胶化学品的标准试验方法&x2014；2-巯基苯并噻唑（MBT）和#x2014；化验

1.1 This test method covers a procedure for the assay of 2-mercaptobenzothiazole (MBT). It is based on a potentiometric titration of MBT with sodium hydroxide. 1.2 The assay is determined as percent by mass. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Rubber Chemicals—2-Mercaptobenzothiazole (MBT)—Assay

ASTM D1765-19 橡胶制品用炭黑标准分类体系

Standard Classification System for Carbon Blacks Used in Rubber Products

ASTM D5230-19 炭黑的标准试验方法&x2014；自动单颗粒硬度

Standard Test Method for Carbon Black—Automated Individual Pellet Hardness

ASTM D7772-15(2019) 炭黑萃取物的标准试验方法&x2013；环己烷提取物的吸光度

1.1 This method covers the determination of extinction (absorbance) of carbon black cyclohexane extract at 386 nm using a UV spectrophotometer. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Carbon Black Extractables – Absorbance of Cyclohexane Extract

ASTM D3493-19a 炭黑的标准试验方法&x2014；压缩样品吸油量（COAN）

Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)

BS ISO 20927:2019 橡胶配合剂 沉淀二氧化硅 通过盘式离心机测定聚集体粒度分布

What is ISO 20927 – Rubber compounding ingredients about? ISO 20927 provides methods and procedures for determining the aggregate size distribution by disc centrifuge. ISO 20927 specifies a general method for determining the aggregate size distribution (ASD) silica by using a disc centrifuge according to the principle of sedimentation. As pre-stage, the silica de-agglomerated in water using strong ultrasonic power treatment. The method described in ISO 20927 is used for precipitated silica. Who is ISO 20927 – Rubber compounding ingredients for? ISO 20927 on adhesives is relevant to: Manufacturers of rubber compounding ingredients Chemical Engineer Researchers and scientists Any entity responsible for testing and quality of compounding ingredients Why should you use ISO 20927 – Rubber compounding ingredients ? Compounding rubber involves mixing rubbers and rubber additives, such as processing aids, fillers, and curing agents, in definite proportions to achieve a uniform mixture with desirable physical and chemical properties for low-temperature processing. ISO 20927 defines the aggregate size distribution of silica by disc centrifuge photosedimentometry as a means of describing and specifying these products. It is widely accepted that the aggregate size distribution of silica could impact the performance of these products. Overall, ISO 20927 is a comprehensive guide to provide methods for determining the aggregate size by disc centrifuge, so users will gain a comprehensive understanding of the quality of rubber compounding ingredients to improve the quality and durability.

Rubber compounding ingredients. Precipitated silica. Determination of aggregate size distribution by disc centrifuge

T/CSTM 00087-2019 硫化剂 对叔丁基苯酚二硫化物聚合物

本标准规定了硫化剂对叔丁基苯酚二硫化物聚合物的结构式和CAS号、技术要求、试验方法、检验规则、包装、标志、运输和贮存。 本标准适用于由对叔丁基苯酚和一氯化硫经缩合反应而制得的硫化剂对叔丁基苯酚二硫化物聚合物。

Vulcanizing agent—Polymerized tert-butyl phenol disulfide

T/CSTM 00088-2019 硫化剂 对叔丁基苯酚二硫化物聚合物和硬脂酸复配物

本标准规定了硫化剂对叔丁基苯酚二硫化物聚合物和硬脂酸复配物的技术要求、试验方法、检验规则、包装、标志、运输和贮存。 本标准适用于由对叔丁基苯酚二硫化物聚合物和硬脂酸为原料按9:1的质量比例混合制得的复配物。

Vulcanizing agent—Polymerized tert-butyl phenol disulfide and stearic acid complex

T/CSTM 00089-2019 混凝土用消泡剂 消抑泡性能的测试方法

本标准规定了混凝土用消泡剂的消抑泡性能的测试方法。 本标准适用于应用在混凝土行业中的消泡剂的消泡性能及抑泡性能的测试。

Defoamer for concrete—Test method for defoaming and Antifoaming performance

ASTM D1799-19 炭黑的标准实施规程&x2014；包装货物抽样

Standard Practice for Carbon Black—Sampling Packaged Shipments

ASTM D8300-19 沉淀水合二氧化硅的标准试验方法&x2014；导电性

1.1 This test method is used to determine the electrical conductivity of silica and the electrical conductivity is suitable for characterizing rubber-grade silicas. 1.2 Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Silica, Precipitated, Hydrated—Electrical Conductivity