83.100 泡沫材料 标准查询与下载
共找到 893 条与 泡沫材料 相关的标准，共 60 页
本标准规定了硬质泡沫塑料试样在规定应力、温度和相对湿度条件下压缩蠕变的测定方法。 本标准适用于各种硬质泡沫塑料。
Cellular plastics,rigid.Determination of compressive creep
- ICS
- 83.100
- CCS
- Y20
- 发布
- 1994-04-12
- 实施
- 1994-12-01
本标准规定了测定硬质泡沫塑料滚动磨损的试验方法。 本标准适用于测定硬质泡沫塑料的滚动磨损特性。
Test method for tumbling friability of rigid cellular plastics
- ICS
- 83.100
- CCS
- G32
- 发布
- 1991-04-28
- 实施
- 1992-02-01
本标准规定了测定硬质泡沫塑料平均泡孔尺寸的试验方法。 本标准适用于硬质泡沫塑料平均泡孔尺寸的测定。
Test method for average cell size of rigid cellular plastics
- ICS
- 83.100
- CCS
- G32
- 发布
- 1991-04-28
- 实施
- 1992-02-01
本标准规定了软质泡沫塑料撕裂性能试验方法。 本标准适用于软质泡沫材料。
Cellular plastics--Tear resistance test for flexible materials
- ICS
- 83.100
- CCS
- G32
- 发布
- 1989-03-31
- 实施
- 1990-01-01
本标准规定了测定软质泡沫材料压陷硬度的试验方法。 本标准适用于开孔型乳胶、聚氨酯泡沫塑料、聚氯乙烯泡沫塑料及其他软质泡沫材料。
Polymeric materials cellular flexible--Determination of hardness(indentation technique)
- ICS
- 83.100
- CCS
- G32
- 发布
- 1989-03-31
- 实施
- 1990-01-01
本标准规定了软质聚氨酯泡沫塑料的分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于聚醚多元醇或聚酯多元醇与甲苯二异氰酸酯反应发泡制得的开孔聚醚（JM）型或聚酯（JZh）型软质聚氨酯泡沫塑料。
Cellular plastics--Flexible polyurethane foam
- ICS
- 83.100
- CCS
- G32
- 发布
- 1989-03-31
- 实施
- 1990-01-01
本标准规定了硬质泡沫塑料开孔与闭孔体积百分率的测定方法。 本标准适用于硬质泡沫塑料开孔与闭孔体积百分率的测定。
Cellular plastics--Determination of volume percentage of open and closed cells of rigid materials
- ICS
- 83.100
- CCS
- G32
- 发布
- 1989-03-31
- 实施
- 1990-01-01
Cellular plastics--Determination of volume percentage of open and closed cells of rigid materials
- ICS
- 83.100
- CCS
- G32
- 发布
- 1989-03-31
- 实施
- 1990-01-01
本标准规定了测定硬质泡沫塑料拉伸性能的试验方法。 本标准主要适用于能承受试样夹具压力的泡沫塑料，若试样不能承受夹具压力，则按第7章规定的方法试验。
Test method for tensile properties of rigid cellular plastics
- ICS
- 83.100
- CCS
- Y28
- 发布
- 1988-07-08
- 实施
- 1989-02-01
本标准规定了模拟软质泡沫聚合材料自然氧老化或湿老化的试验方法。 本标准适用于开孔素氨脂泡沫塑料和开孔泡沫乳胶.
Polymeric materials, Cellular flexible--Accelerated ageing tests
- ICS
- 83.100
- CCS
- Y28
- 发布
- 1988-07-08
- 实施
- 1989-02-01
Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen
- ICS
- 83.100
- CCS
- 发布
- 2024-02-01
- 实施
本文件规定了再生聚丙烯发泡保温片材（以下简称“产品”）的产品分类，要求，检验规则，标志、包装、运输和贮存。 本文件适用于以再生聚丙烯树脂为主要原料，添加一定量的发泡剂和少量添加剂，通过挤塑成型而制得具有泡孔结构的表观密度在20kg/m3～500 kg/m3的单层发泡片材的生产、检验和销售。
Recycled polypropylene foam insulation sheet
- ICS
- 83.100
- CCS
- C292
- 发布
- 2023-11-30
- 实施
- 2023-11-30
Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
- ICS
- 83.100
- CCS
- 发布
- 2023-11-01
- 实施
Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- ICS
- 83.100
- CCS
- 发布
- 2023-09-01
- 实施
Rigid cellular plastics. Determination of water vapour transmission properties
- ICS
- 83.100
- CCS
- 发布
- 2023-08-31
- 实施
- 2023-08-31
Polymeric materials, cellular, flexible. Determination of air flow value at constant pressure-drop
- ICS
- 83.100
- CCS
- 发布
- 2023-08-31
- 实施
- 2023-08-31
本文件规定了二氧化碳发泡挤塑聚苯乙烯泡沫保温板的术语和定义、分类和标记、技术要求、试验方法、检验规则、包装、标志与贮存。
Carbon dioxide foam extruded polystyrene foam insulation board
- ICS
- 83.100
- CCS
- C419
- 发布
- 2023-08-04
- 实施
- 2023-09-04
1.1 These test methods cover the preparation of a standardsize test sample and basic tests for physical property determinations of microcellular urethane materials. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—There is no known ISO equivalent to this standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Methods for Microcellular Urethane Materials
- ICS
- 83.100
- CCS
- 发布
- 2023-08-01
- 实施
Rigid cellular plastics — Determination of water vapour transmission properties
- ICS
- 83.100
- CCS
- 发布
- 2023-08
- 实施
- 2023-08
本标准规定了绝热用交联聚乙烯泡沫塑料的术语和定义、分类和标记、技术要求、试验方法、检验规则、标志、包装、运输和贮存。
Cross-linked polyethylene foam for thermal insulation
- ICS
- 83.100
- CCS
- C292
- 发布
- 2023-07-11
- 实施
- 2023-08-11
