83.140 橡胶和塑料制品 标准查询与下载

KS M 3523-2002 聚四氟乙烯塑胶板

Polytetrafluoroethylene sheets

KS M 3042-2002(2012) 如何衡量塑料制品公理的尺寸

General rules for method for determination of dimension of plastics parts

KS M 3053-2002 塑料薄膜和片材的静摩擦系数和动摩擦系数的测试方法

TESTING METHOD FOR STATIC AND KINETIC COEFFICIENTS OF FRICTION OF PLASTIC FILMS AND SHEETS

KS M 3052-2002 塑料薄膜和薄片气体透过率的测试方法

TESTING METHOD FOR GAS TRANSMISSION RATE THROUGH PLASTIC FILM AND SHEETING

KS M 3522-2002 聚四氟乙烯带

Polytetrafluoroethylene tapes

KS M 3030-2002 薄膜形式塑料的可燃性和燃烧率的测定

DETERMINATION OF FLAMMABILITY AND BURNING RATE OF PLASTICS IN THE FORM OF FILM

HG/T 2289-2001 可曲挠橡胶接头

本标准规定了可曲挠橡胶接头的定义、分类、产品标记、要求、试验方法、检验规则及标志、包装、贮存和运输等。 本标准适用于金属管路的柔性连接件--可曲挠橡胶接头。

Flexible rubber joint

KS M 6704-2001 稻谷脱壳机橡胶辊

이 규격은 정미용 고무 롤러(이하 고무 롤러라 한다.)에 대하여 규정한다.

Rice hulling rubber roll

KS M 3009-2001 测试塑料膜的摩擦系数的方法

Testing methods for coefficients of friction of plastic film

KS M 3106-2001 防X射线和γ射线用含铅甲基丙烯酸酯片材

Lead-containing methacrylate sheets forprotection against X-rays and γ-rays

KS M 3847-2000(2005) 再生塑料板

Reclaimed plastics pannels

GSA A-A-3139 ADMIN CHG NOTICE 1-2000 弹性地板粘合剂(水基)

Commercial Item Description, A-A-3 I39 doted March 3,1998, needs the IMPROVEMENT BLOCK corrected asshown below:

ADHESIVE, RESILIENT FLOORING, (WATER-BASED)

KS M 3604-1999 再生聚乙烯坐便器垃圾处理厂施工部位

Construction parts of recyled polyethylene water closet wastes disposal plant

JB/T 7898-1999 填充聚四氟乙烯导轨软带

本标准规定了填充聚四氟乙烯导轨软带的技术要求，检验规则，包装、标志和贮存。 本标准适用于厚度在0.3～3.2 mm，需要减摩、抗磨、防爬的金属切削机床、仪器和其他机械导轨的软带。

Filled polytetrafluoroethylene slideway soft strips

HG/T 3658-1999 双面压敏胶带

本标准规定了双面压敏胶粘带的分类、要求、试验方法、检验规则、标志、包装、运 输及储存。 本标准适用于以纸(包括非织造布，俗称无纺布)、塑料薄膜、发泡体为基材，两面均匀地涂布压敏胶粘剂的双面压敏胶粘带。

Pressure Sensitive Adhesive Double Sided Tapes

DLA A-A-59412-1999 地板安装旋转型锻机 取代 DLA MIL-S-80035 C CANC公告1,DLA MIL-S-80035 C,DLA MIL-S-80035 B,DLA MIL-S-80035 A,DLA MIL-S-80035

This commercial item description (CID) covers floor-mounted rotary swaging machines and accessories intended for use in pointing, reducing diameters, and forming shapes on tubing and solid stock and swaging fittings to cables and hoses.

SWAGING MACHINE, ROTARY, FLOOR-MOUNTED [Superseded: DLA MIL-S-80035 C CANC NOTICE 1, DLA MIL-S-80035 C, DLA MIL-S-80035 B, DLA MIL-S-80035 A, DLA MIL-S-80035]

MS 672-1999 给排水管道橡胶密封件规范（第一次修订）

Specification of rubber seals in water supply, drainage and sewerage plpelines (first revision)

EN 1013-3:1997 单层顶板光透明截面塑料板.第3部分:聚氯乙烯板的特殊要求和试验方法(PVC)

This part of EN 1013-3 specifies requirements for materials and performance of lighttransmitting profiled sheets of polyvinyl chloride produced toThe desired profile by extrusionand/or forming for single skin applications. It has to be read in conjunction withThe generalrequirements contained in EN 1013-1.

Light Transmitting Profiled Plastic Sheeting for Single Skin Roofing - Part 3: Specific Requirements and Test Methods for Sheets of Polyvinyl Chloride (PVC)

ONORM EN ISO 12017:1996 塑料．聚（甲基丙烯酸甲酯）双合板和三合板．试验方法(ISO 12017-1995)

Diese internationale Norm beschreibt die Prüfverfahren zur Qualit?tskontrolle von extrudierten, flachen Poly(methyl methacrylat) (PMMA) Stegdoppel- und Stegdreifachplatten, die aus farblosen und eingef?rbten durchsichtigen, durchscheinenden und undurchsichtigen Materialien gem?? Abschnitt 4 hergestellt sind. Die minimale Breite der Platten betr?gt 600 mm. Die Hauptanwsndungsbereiche dieser Platten sind in Geb?uden und in der Landwirtschaft (Gew?chsh?user).

Plastics-Poly(methyl methacrylate) double-and triple-skin sheets-Test methods

TIS 524-1996 三聚氰胺器具

Melamine utensils