83.140 橡胶和塑料制品 标准查询与下载
共找到 370 条与 橡胶和塑料制品 相关的标准，共 25 页
This International Standard specifies requirements for ruber materials used in elastomeric bridge bearings,which may be of the plain-pad or laminated type. It also specifies methods of test and describes pro- cedures for the preparation of test pieces from fin- ished bearings. This International Standard does not contain aspects relating to design properties and quality control of the complete bearing, except where the complete bearing is used as the source of samples and test pieces to determine properties of the rubber material. Dimen- sions and tolerances are therefore not included in this International Standard.
Rubber products – Bridge bearings – Specification for rubber materials
- ICS
- 83.140
- CCS
- 发布
- 2007-06-05
- 实施
이 규격은 플라스틱 필름 및 시트가 동일 또는 다른 재료 위를 미끄러질 때의 정지 및 미끄
Plastics-Film and sheeting-Determination of the coefficients of friction
- ICS
- 83.140
- CCS
- G31
- 发布
- 2006-08-07
- 实施
- 2006-08-07
This part of IS0 11 193 specifies requirements for packaged sterile, or bulked non-sterile, rubber gloves intended for use in medical examinations and diagnostic or therapeutic procedures to protect the patient and the user from crosscontamination. It also covers rubber gloves intended for use in handling contaminated medical materials and gloves with smooth surfaces or with textured surfaces over part or all of the glove. This part of IS0 11193 is intended as a reference for the performance and safety of rubber examination gloves. The safe and proper usage of examination gloves and sterilizatioprocedures with subsequent handling, packaging and storage procedures are outside the scope of this part of IS0 11193.
Single-use medical rubber examination gloves
- ICS
- 83.140
- CCS
- 发布
- 2006-03-14
- 实施
- 2006-12-01
이 규격은 일반 차량, 항공기 및 그 밖의 기계에 쓰이는 고무 개스킷(이하 개스킷이라
Rubber gasket
- ICS
- 83.140
- CCS
- G31
- 发布
- 2004-12-24
- 实施
- 2004-12-24
1.1 本分类系统用表格表示了硫化橡胶材料(单一的或并用的天然橡胶、再生胶和合成橡胶)的性能。这些硫化橡胶材料预定用于汽车用橡胶制品，但又不局限于此。 注：本分类系统可满足其他工业的许多需要，与SAE钢材编号大致相同。但务必记住，为了满足汽车工业的需要，本系统会被修订。建议始终使用最新版本。 1.2 本分类系统以所有橡胶制品的性能都能用特有的材料代号列出这一前提为基础。这些材料代号由类型和级别而确定，类型以耐热为基础，级别以耐油溶胀为基础，这样就确立了基本要求，基本要求与表述附加要求的数字一起就可以完整地说明所有弹性体材料的性能。 1.3 当本分类系统的条款与某一特定产品的详细规范的规定相抵触的情况下，则应以后者优先。 注：当橡胶制品用于要求太特殊以致无法用本分类系统完整规定的场合，采购方有必要事先同供货方协商，以便确定合适的性能、试验方法和试验所限定的规范。 1.4 以国际单位制规定的数值才被认为是标准的。
Standard classification system for rubber products in automotive application
- ICS
- 83.140
- CCS
- G40
- 发布
- 2004-12-14
- 实施
- 2005-06-01
本标准规定了降解塑料片材的术语和定义、分类和标识、降解性能要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以生物分解材料或/和非生物分解树脂为主要原料，添加或不添加降解助剂加工成型的降解塑料片材(以下简称片材)。
Define,classify,marking and degradability requirement of degradable plastic sheet
- ICS
- 83.140
- CCS
- G33
- 发布
- 2004-12-14
- 实施
- 2005-06-01
本标准规定了生物分解塑料片材的术语和定义、标识、生物分解性能要求、生物分解试验方法和标志、包装、运输、贮存。 本标准适用于以可生物分解材料为原料而加工成型的生物分解塑料片材(以下简称片材)。这些材料包括天然和/或合成聚合物或它们的混合物， 以及含有增塑剂、颜料或其他化合物等添加剂的生物分解材料。
Define,marking and biodegradable requirement of biodegradable plastic sheet
- ICS
- 83.140
- CCS
- G33
- 发布
- 2004-12-14
- 实施
- 2005-06-01
本标准规定了可堆肥塑料片材的术语和定义、标识、可堆肥能要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以可生物分解材料为原料而加工成型的生物分解塑料片材(以下简称片材)。这些材料包括天然和/或合成聚合物或它们的混合物，以及含有增塑剂、颜料或其他化合物等添加剂的生物分解材料。
Define,marking and compostability requirement of compostable plastic sheet
- ICS
- 83.140
- CCS
- G33
- 发布
- 2004-12-14
- 实施
- 2005-06-01
이 규격은 콘크리트 거푸집용으로 사용되는 합성 수지 판(이하 거푸집용 합성 수지 판이라
Plastic boards for concrete form
- ICS
- 83.140
- CCS
- Q13
- 发布
- 2004-10-19
- 实施
- 2004-10-19
이 규격은 콘크리트 거푸집용 합성 수지 판의 면판 및 보강재로 된 콘크리트 거푸집용 합
Plastic panels for concrete form
- ICS
- 83.140
- CCS
- Q13
- 发布
- 2004-10-19
- 实施
- 2004-10-19
DIMENSIONS OF POLYAMIDE(NYLON 6,66) SHEETS AND RODS
- ICS
- 83.140
- CCS
- 发布
- 20040630
- 实施
- 20040630
