共找到 23 条与 相关的标准,共 2 页
本标准规定污水及一般用内衬聚乙烯之聚氯乙烯塑料硬质管之直管及活套管(以下简称 PVC-PE 管)检验法。备考:本标准中{ } 内之单位系公制,数值为近似值。
Method of Test for Unplasticized Polyvinyl Chloride Pipes with Polyethylene Lining for Wastewater and General Uses
本标准规定玻璃纤维强化塑料管配件(以下简称 GFRP 管配件)之检验方法。
Methods of Test for Glass - Fibor - Reinferced Plastic Pipe Fittings
本标准适用于化学工业及一般用丙烯晴–丁二烯–苯乙烯 (简称 ABS)塑料管之直管、活套头及接头配件检验法。备考:本标准{ } 内之单位系公制,数值系近似值。
Method of Test for Acrylonitrile - Butadiene - Styrene (ABS) Plastic Pipes and Fittings for Chemical Industrial and General Uses
本标准规定地下配油管线系统之玻璃纤维强化塑料管(以下简称 GFRP 管)及配件之检验法。备考:本标准中{ } 内之单位系公制,数值系近似值。
Method of Test for Glassfiber Reinforced Plastic Underground Petroleum Pipes and Fittings
本标准规定自来水用丙烯睛一丁二烯一苯乙烯(ABS)塑料管之接头配件检验法。备考﹕本标准中﹛﹜内之单位系公制,数值系近似值。
Method of Test for Acrylonitrile - Butadiene - Styrene (ABS) Plastic Fittings for Water Works
本标准规定导电线管用聚氯乙烯塑料硬质管之检验方法。
Method of Test for Unplasticized Polyvinyl Chloride Pipe for Electric Conduit Use
本标准规定冷热自来水用交连高密度聚乙烯夹铝塑料管之检验法。备考:本标准中{ } 内之数值系公制单位。
Method of Test for Crosslinked Polyethylene-Aluminum-Crosslinked Polyethylene Pipes for Water Works
本标准规定天然气用聚乙烯塑料管检验法。备考:本标准中{ } 内之单位及数值系国际单位制(SI)。
Method of Test for Polyethylene Pipes for Natural Gas Supply
本标准规定管筏用聚氯乙烯塑料硬质管(以下简称 PVC 筏管)之检验法。
Method of Test for Unplasticized Polyvinyl Chloride Pipes for Raft
本标准规定玻璃纤维强化塑料加强聚氯乙烯塑料硬质管(以下简称 FRP 加强 PVC 管)之检验方法。
Method of Test for Unplasticized Polyvinyl Chloride Pipes with Fiberglass Reinforced Plastic Reinforcement
本标准规定橡胶用配合剂之一般试验方法。备注:本标准中{ } 内之单位及数值,系依国际单位制(SI)。
Methods of Test for Rubber Compounding Ingredients
本标准规定电线导管用及农业灌溉排水用聚氯乙烯硬质塑料浪管之检验方法。
Method of Test for Rigid Polyvinyl Chloride Corrugated Pipes
本标准规定聚丁烯塑料冷热水配管系统组件之检验方法。
Method of Test for Polybutylene(PB) Plastic Hot - Water Distribution Systems
1.1 本标准定热塑性塑料管直径、管壁厚度及长度等尺寸之测定法,包括由内部接头接合之管内,圆管平均外径(不考虑不圆度)、不圆度及非圆管平均外径之测量步骤,并测定长度及直度。1.2 本方法亦包含热塑性塑料管配件尺寸之测定步骤。
Method of Determination for Dimensios of Thermoplastic Pipe and Fittings
本方法规定塑料管(包括热塑性及强化热固性)在内部恒压下破壤时间之测定法,但限制管外径与管壁厚比在 5:1 以上。本法并提供在一条件下管型塑料性质之测定法。
Time to Failure of Plastic Pipe Under Constant Internal Pressure
1.1 本标准规定热塑性塑料及强化热固性塑料管及配件短时间断裂强度之测定。1.2 本方法适合于建立实验皱对质量管理及获得规格之要求。
Method of Test for Short - Time Rupture Strength of Plastic Pipe, Tubing and Fittings
本标准规定聚丁烯塑料薄管之检验方法。
Method of Test for Polybutylene Plastic Tubing
本标准适用于测定聚丙烯塑料管在高温下之长度变化。
Polypropylene (PP) Pipes- Determination of Longitudinal Reversion
本标准适用于测定硬质聚氯乙烯塑料管高温下之长度变化。
Unplasticized Polyvinyl Chloride(PVC) Pipes - Determination of Longitudinal Reversion - Liquid Bath Immersion Method
本标准适用于硫酸对硬质氯乙烯塑料管之影响,并规定其检验法。
Unplasticized Polyvinyl Chloride(PVC) Pipes - Effect of Sulphuric Acid - Requirement and Test Method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号