共找到 159 条与 相关的标准,共 11 页
Tyres for agricultural tractors and machines - Code-designated and service-description marked radial drive-wheel tyres
Tyres (ply rating marked series) and rims for agricultural tractors and machines. Tyre load ratings
This part of ISO 4251 specifies load ratings for the ply rating marked series of tyres for agricultural tractors and machines. Tyre designation and dimensions, and approved rim contours, rim dimensions, and tyre classification and nomenclature are given in ISO 4251-1, ISO 4251-3 and ISO 4251-4 respectively.
Tyres (ply rating marked series) and rims for agricultural tractors and machines. Tyre load ratings
Tyres (ply rating marked series) and rims for agricultural tractors and machines. Tyre designation and dimensions, and approved rim contours
Tyres and rims (metric series) for agricultural tractors and machines - Part 2 : service description and load ratings.
Tyres and rims (metric series) for agricultural tractors and machines - Part 1 : tyre designation, dimensions, marking and tyre/rim coordination.
Tyres and rims (metric series) for agricultural tractors and machines - Service description and load ratings
Tyres for agricultural tractors and machines - Code-designated and service description marked, radial drive-wheel tyres.
This part of ISO 4251 specifies load ratings for the ply rating marked series of tyres for agricultural tractors and machines. Tyre designation and dimensions, and approved rim contours, rim dimensions, and tyre classification and nomenclature are given in ISO 4251-1, ISO 4251-3 and ISO 4251-4 respectively.
Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 2: Tyre load ratings
This part of ISO 4251 establishes the designation in use and the dimensions of the ply rating marked series of tyres for agricultural tractors and machines. Tyre load ratings, rim dimensions, and tyre classification and nomenclature are given in ISO 4251-2, ISO 4251-3 and ISO 4251-4 respectively.
Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 1: Tyre designation and dimensions, and approved rim contours
This part of ISO 7867 establishes the size designation, the dimensional calculation and the markings of the metric series of tyres primarily intended for use on agricultural tractors and machines. Tyre and rim coordination is also given. It applies to bias-belted, diagonal and radial tyres mounted an 5°tapered rims, as specified in ISO 4251-3. Only established rim diameters and widths within the ranges in Tables 1 and 2 are recommended. This part of ISO 7867 also applies to different concepts and types of tyres and rims; in this case, however, appropriate rim/section ratios K1 and coefficients K2, a and b will be established and added. Dimensions of existing rims are specified in ISO 4251-3. NOTE Tyres (ply rating marked series) and rims for agricultural tractors and machines are specified in ISO 4251-1 to ISO 4251-5. Service description (load index —speed symbol) marking of the existing series of agricultural tractor-drive-wheel tyres is given in ISO 8664.
Tyres and rims (metric series) for agricultural tractors and machines - Tyre designation, dimensions and marking, and tyre/rim coordination
This part of ISO 7867 establishes the size designation, the dimensional calculation and the markings of the metric series of tyres primarily intended for use on agricultural tractors and machines. Tyre and rim coordination is also given. It applies to bias-belted, diagonal and radial tyres mounted an 5°tapered rims, as specified in ISO 4251-3. Only established rim diameters and widths within the ranges in Tables 1 and 2 are recommended. This part of ISO 7867 also applies to different concepts and types of tyres and rims; in this case, however, appropriate rim/section ratios K1 and coefficients K2, a and b will be established and added. Dimensions of existing rims are specified in ISO 4251-3. NOTE Tyres (ply rating marked series) and rims for agricultural tractors and machines are specified in ISO 4251-1 to ISO 4251-5. Service description (load index —speed symbol) marking of the existing series of agricultural tractor-drive-wheel tyres is given in ISO 8664.
Tyres and rims (metric series) for agricultural tractors and machines - Part 1: Tyre designation, dimensions and marking, and tyre/rim coordination
This International Standard specifies the marking, dimensions, load ratings and reference speeds for existing series of agricultural tractor drive-wheel tyres with service description (load index and speed symbol). It applies to tyres of radial construction in the speed categories 30 km/h (speed symbol A6), 40 km/h (speed symbol A8), and 50 km/h (speed symbol B).
Tyres for agricultural tractors and machines - Code-designated and service-description marked radial drive-wheel tyres
This part of ISO 7867 establishes the service description, the tyre load ratings in basic and special applications, and reference inflation pressure increments for the metric series of tyres primarily intended for agricultural tractors and machines. It applies to bias-belted, diagonal and radial tyres mounted on 5°tapered rims, as specified in ISO 4251-3. It also applies to different concepts and types of tyres and rims; in these cases, however, appropriate load/speed curves and reference inflation pressure increments will be established and added. Basic tyre load-carrying capacities for ranges of existing tyres are given in Annex A. NOTE Designation and marking of the metric series are defined in ISO 7867-1. Tyres (ply rating marked series) and rims for agricultural tractors and machines are specified in ISO 4251-1 to ISO 4251-5. Service description (load index and speed symbol) marking of existing series of agricultural tractor-drive-wheel tyres is given in ISO 8664.
Tyres and rims (metric series) for agricultural tractors and machines - Part 2: Service description and load ratings
This SAE Standard is established for the following purpose: a. Simplify the application of radial drive wheel tires toagricultural vehicles especially those with multiple drive axleshaving tires of different sizes. b. Provide a pattern to combine similar sized tires intorolling circumference index groups with uniform spacing betweengroups. c. Bias drive tires are not included in this Standard.
Rolling Circumference Index Groups for Radial Tractor Drive Tires
Pneumatic tyres for tractors and agricultural machinery. Specifications
Prezentul standard stabile?te m?rimile ?i marcarea camerelor de aer pentru anvelopele de tractoare, ma?ini ?i remorci agricole precum ?i tipurile de valve corespunz?toare acestora.
Tubes for tractor, agricultural machine and trailer tyres - Sizes and marking
Настоящий стандарт устанавливает единообразные предписания, касающиеся официального утверждения пневматических шин для сельскохозяйст
Uniform provisions concerning the approval of pneumatic tyres for agricultural vehicles and their trailers
This is Amendment 1 to ISO 4251-5-1992 (Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 5: Log skidder tyres)
Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 5: Log skidder tyres; Amendment 1
Tyres and wheels - Tyres - Agricultural tractor and machine tyres - Method of measuring tyre rolling circumference for agricultural tractor drive wheels
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号