85.040 纸浆 标准查询与下载



共找到 952 条与 纸浆 相关的标准,共 64

This document specifies a method for determining the bacteria, yeast and mould population on the surface of paper and paperboard. The enumeration relates to specific media. This document is applicable to all kinds of paper and paperboard, to dry market pulp in sheet form and to packaging material.

Pulp, paper and board — Microbiological examination — Part 2: Enumeration of bacteria, yeast and mould on surface

ICS
85.040
CCS
发布
2023-05
实施
2023-05

Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)

ICS
85.040
CCS
发布
2023-05
实施

Pulps — Determination of drainability — Part 2: "Canadian Standard" freeness method

ICS
85.040
CCS
发布
2023-05
实施

1   Scope This document describes a procedure for determining the content of residual alkali in Kraft black liquors having a dry matter content up to 40 %. The method is based on a potentiometric titration with hydrochloric acid and is intended for black liquor samples with an initial pH ≥ 11,0. The lower limit of determination is 0,1 g/l of eq. NaOH.

Pulps. Kraft liquor. Determination of residual alkali using potentiometric titration

ICS
85.040
CCS
发布
2023-03-31
实施
2023-03-31

1   Scope This document describes a procedure for the determination of sulphide, i.e. the hydrosulphide ion concentration , in white, oxidized white and green liquors, as well as in black liquor having a dry matter content up to 40 %. The determination also includes the sulphide part of any polysulphide present in the solution.

Pulps. Kraft liquor. Determination of hydrosulphide ion concentrationusing potentiometric titration

ICS
85.040
CCS
发布
2023-03-31
实施
2023-03-31

1   Scope This document specifies a potentiometric titration procedure for the determination of total, active and effective alkali in white and green liquors obtained and used in the kraft or sulphate pulping process. This document is not applicable for the analysis of liquors such as oxidized white liquors which contain significant amounts of polysulphides. The method given in this document is not intended for the determination of particular ionic species, such as sulphides or carbonates.

Pulps. Kraft liquor. Determination of total, active and effective alkali using potentiometric titration

ICS
85.040
CCS
发布
2023-03-31
实施
2023-03-31

BS EN ISO 15360-3. Recycled pulps. Estimation of Stickies and Plastics - Part 3. Determination by applying near-infrared measurement

ICS
85.040
CCS
发布
2023-03-28
实施
2023-03-28

This document describes a procedure for the determination of sulphide, i.e. the hydrosulphide ion concentration, in white, oxidized white and green liquors, as well as in black liquor having a dry matter content up to 40 %. The determination also includes the sulphide part of any polysulphide present in the solution.

Pulps — Kraft liquor — Determination of hydrosulphide ion concentration using potentiometric titration

ICS
85.040
CCS
发布
2023-03-10
实施
2023-03

This document specifies a potentiometric titration procedure for the determination of total, active and effective alkali in white and green liquors obtained and used in the kraft or sulphate pulping process. This document is not applicable for the analysis of liquors such as oxidized white liquors which contain significant amounts of polysulphides. The method given in this document is not intended for the determination of particular ionic species, such as sulphides or carbonates.

Pulps — Kraft liquor — Determination of total, active and effective alkali using potentiometric titration

ICS
85.040
CCS
发布
2023-03-10
实施
2023-03

This document describes a procedure for determining the content of residual alkali in Kraft black liquors having a dry matter content up to 40 %. The method is based on a potentiometric titration with hydrochloric acid and is intended for black liquor samples with an initial pH ≥ 11,0. The lower limit of determination is 0,1 g/l of eq. NaOH.

Pulps — Kraft liquor — Determination of residual alkali using potentiometric titration

ICS
85.040
CCS
发布
2023-03-10
实施
2023-03

1   Scope This document specifies an apparatus and the procedures for the laboratory wet disintegration of mechanical pulps that exhibit latency except when brightness is measured. This apparatus and procedure can be used for preparation of the test portion in other International Standards dealing with pulps. This document is applicable to all kind of mechanical pulps (i.e. mechanical, semi-chemical and chemi-mechanical pulps) exhibiting latency .

Pulps. Laboratory wet disintegration. Disintegration of mechanical pulps at ≥ 85°C

ICS
85.040
CCS
发布
2023-02-28
实施
2023-02-28

This document specifies an apparatus and the procedures for the laboratory wet disintegration of mechanical pulps that exhibit latency except when brightness is measured. This apparatus and procedure can be used for preparation of the test portion in other International Standards dealing with pulps. This document is applicable to all kind of mechanical pulps (i.e. mechanical, semi-chemical and chemi-mechanical pulps) exhibiting latency.

Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at ≥ 85°C (ISO 5263-3:2023)

ICS
85.040
CCS
发布
2023-02-22
实施
2023-05-31

This document specifies an apparatus and the procedures for the laboratory wet disintegration of mechanical pulps that exhibit latency except when brightness is measured. This apparatus and procedure can be used for preparation of the test portion in other International Standards dealing with pulps. This document is applicable to all kind of mechanical pulps (i.e. mechanical, semi-chemical and chemi- mechanical pulps) exhibiting latency.

Pulps — Laboratory wet disintegration — Part 3: Disintegration of mechanical pulps at ≥85°C

ICS
85.040
CCS
发布
2023-02-08
实施
2023-02

BS ISO 6350. Lignins. Determination of dry matter content. Oven-drying and freeze-drying methods

ICS
85.040
CCS
发布
2023-01-31
实施
2023-01-31

This document specifies the general procedure for fibre furnish analysis of paper, board and pulps. It is applicable to all kinds of pulps and to most papers and boards, including those containing more than one kind of fibre, taking into account different pulping processes. This method is less suitable for heavily impregnated or highly coloured papers and boards, which cannot be dispersed or decoloured without affecting the structure or the staining reactions of the fibres.

Paper, board and pulps — Fibre furnish analysis — Part 1: General method

ICS
85.040
CCS
发布
2023-01-31
实施
2023-01

BS ISO 9795. Lignins. Determination of inorganics content in kraft lignin, soda lignin and hydrolysis lignin

ICS
85.040
CCS
发布
2023-01-31
实施
2023-01-31

1   Scope This document specifies two procedures for the preparation of laboratory sheets prior to measuring optical properties. One is the preparation of pads in a Büchner funnel using a filter paper or a wire screen and the other one is the preparation of laboratory sheets in a standard sheet former (conventional or Rapid Köthen). This document is applicable to all wood pulps and to most other types of pulp. It is not applicable to pulps with very long fibres, such as those made from unshortened cotton, flax and similar materials, unless they are reduced to a suitable fibre length (about 2 mm) before performing the methods. It is not applicable to recycled pulps (see ISO 21993). It is not applicable to opacity measurements or to the determination of light scattering and absorption coefficients.

Pulps. Preparation of laboratory sheets for the measurement of optical properties

ICS
85.040
CCS
发布
2022-12-31
实施
2022-12-31

Pulps — Sampling for testing

ICS
85.040
CCS
发布
2022-12-22
实施

Pulps — Sampling for testing

ICS
85.040
CCS
发布
2022-12-22
实施

Pulps — Preparation of laboratory sheets for physical testing — Part 2: Rapid-Köthen method

ICS
85.040
CCS
发布
2022-12-22
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号