85.100 造纸工业设备 标准查询与下载
共找到 236 条与 造纸工业设备 相关的标准，共 16 页
This European Standard applies to wood grinders intended for the production of pulp used in paper making including sharpening devices and shall be used together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to wood grinders when used as intended and under the conditions foreseen by the manufacturer (see clause 4).This standard does not apply to loading facilities. Hazards caused by overpressure are not covered byThis standard. Note: For hazards caused by overpressure, see the directive for pressure vessels.This European Standard is not applicable to wood grinders manufactured before the date of publication of this European Standard by CEN.
Safety of machinerie - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders (Incorporates Amendment A1: 2009)
- ICS
- 85.100
- CCS
- 发布
- 2005-06-01
- 实施
This standard applies to machines for the production of corrugated board and the conversion of flat and corrugated board: . corrugated board production machines; . folder gluer machines; . printer slotters, rotary die cutters and combined machines (inline machines); . hand-fed platen machines for cutting and creasing; . automatic platen machines for cutting and creasing; . tube winding machines. This document shall be used together with EN 1010-1:2004. Both parts together identify all significant hazards relevant to machines for the production of corrugated board and the conversion of flat and corrugated board when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements in EN 1010-5 take precedence over respective requirements in EN 1010-1:2004. This document does not deal with risks generated by noise emitted from the machines. These issues are fundamentally covered in EN 1010-1:2004 However, this document specifies requirements for noise reduction of corrugated board and flatbed punching machines.
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board
- ICS
- 85.100
- CCS
- 发布
- 2005-05-18
- 实施
- 2005-08-31
This European Standard applies to pulpers andTheir loading facilities intended for use in paper making and shall be used together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to pulpers andTheir loading facilities, whenThey are used as intended and underThe conditions foreseen byThe manufacturer (see clause 4).This European Standard is not applicable to pulpers andTheir loading facilities that have been manufactured beforeThe date of publication of this standard.
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities (Incorporates Amendment A1: 2009)
- ICS
- 85.100
- CCS
- 发布
- 2005
- 实施
This European Standard applies to reel splitters intended for use in paper making and shall be used together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazardous events relevant to reel splitters when used as intended and under the conditions reasonably foreseen by the manufacturer as incorrect application (see clause 4).This European Standard applies only to reel splitters with a movable knife and of the following designs: machines with a vertically moving knife pressed downwards from the top onto the reel, generally right to the core so that the layers of wound paper are separated one after the other and fall off; machines with a driven and movable circular knife that cuts the wound layers of the horizontal reel successively, beginning from the top down to the core, with the cut layers of wound paper falling off one after the other.This European Standard also applies to the integrated conveyor belts and the integrated pivoting platform.This European Standard also covers the guard rails at the interface of the reel splitter and a pulper that is charged with an integrated conveyor belt of the reel splitter. NOTE Pulpers are dealt with in EN 1034-4.This European Standard is not applicable to reel splitters which are manufactured before the date of publication of this EN.
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter (Incorporates Amendment A1: 2009)
- ICS
- 85.100
- CCS
- 发布
- 2005
- 实施
This European Standard applies to barking drums consisting of drum, drive, power transmission elements, supporting wheels and control systems intended for use in debarking plants for paper making and shall be used together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to barking drums, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).This standard does not apply to sawing equipment or log and bark conveying systems used in debarking plants.This European Standard is not applicable to barking drums that have been manufactured before the date of publication of this European Standard by CEN.
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums (Incorporates Amendment A1: 2009)
- ICS
- 85.100
- CCS
- 发布
- 2005
- 实施
This European Standard applies to sheeters, including unwinding units, sheet stacker, drive and control units intended for use in paper making and shall be used together with EN 1034-1:2000+A1:2010. Paper dust and edge strip suction devices are not covered byThis standard. It deals with all significant hazards, hazardous situations and hazard events relevant to sheeters, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).This standard does not apply to: sheeters for corrugated board (see EN 1010-5); sheeters for foil (see EN 1010-1); sheeters with sheet feeders (see EN 1010-1); guillotines (see EN 1010-3:2002).This document is not applicable to sheeters that have been manufactured before the date of publication of this document by CEN.
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters (Incorporates Amendment A1: 2009)
- ICS
- 85.100
- CCS
- 发布
- 2005
- 实施
This European Standard applies to machines for de-wiring bales and units and shall be used together with EN 1034-1:2000+A1:2010. It deals with all significant hazards, hazardous situations and hazard events relevant to machines for de-wiring bales and units, when used as intended and under conditions reasonably foreseeable byThe manufacturer as incorrect application (see clause 4).This European Standard is not applicable to hand-held devices.This European Standard is not applicable to machines for de-wiring bales and units which are manufactured beforeThe date of publication of this document by CEN.
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units (Incorporates Amendment A1: 2009)
- ICS
- 85.100
- CCS
- 发布
- 2005
- 实施
This European Standard applies to calenders intended for use in paper making and finishing and shall be used together with EN 1034-1:2000+A1:2010. It deals with all significant hazards listed in clause 4. Related safety requirements and/or measures are described in clause 5. It does not cover hazards connected with lifting operations required for changing rolls, inserting reels into the unwinding unit, removal of reels from the winding unit and heating systems for heating calender rolls.This European Standard is not applicable to calenders that have been manufactured before the date of publication of this standard.
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender (Incorporates Amendment A1: 2009)
- ICS
- 85.100
- CCS
- 发布
- 2005
- 实施
本标准规定了纸与纸板油墨吸收性测定仪的要求，试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于平版、凹版、凸版印刷用白纸或近白色、涂布或未涂布纸和纸板的油墨吸收性测定仪。油墨仪使用中的周期技术状态检查亦应参照使用。
Paper and board - Tester of ink absorbency
- ICS
- 85.100
- CCS
- N72
- 发布
- 2004-08-15
- 实施
- 2005-01-01
本标准规定了纸与纸板平滑度仪的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于纸张和纸板表面平滑度试验使用别克式纸和纸板平滑仪(以下简称"平滑仪”)。平滑仪使用中的周期技术状态检验亦应参照使用。
Paper and board-Tester of smoothness
- ICS
- 85.100
- CCS
- N72
- 发布
- 2004-08-15
- 实施
- 2005-01-01
本标准规定了纸与纸板耐折度仪的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于纸张、纸板及烟草薄片等片状材料进行耐折度疲劳强度试验的耐折度仪 (以下简称“耐折仪”)。耐折仪使用周期技术状态检验亦参照使用。
Paper and board-Tester of folding endurance
- ICS
- 85.100
- CCS
- N72
- 发布
- 2004-08-15
- 实施
- 2005-01-01
本标准规定了纸与纸板耐破度仪的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于纸、纸板及其它低强度片状材料的耐破度仪(以下简称"耐破仪")。耐破仪使用中的周期技术状态检查亦应参照使用。
Paper and board-Tester of bursting strength
- ICS
- 85.100
- CCS
- N72
- 发布
- 2004-08-15
- 实施
- 2005-01-01
本标准规定了纸与纸板厚度测定仪的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于纸张、纸板及瓦楞纸板等片状材料，采用接触法测量其厚度的厚度测定仪亦参照使用。
Paper and board-Tester of thickness
- ICS
- 85.100
- CCS
- N72
- 发布
- 2004-08-15
- 实施
- 2005-01-01
本标准规定了纸板及纸箱抗压试验机的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于纸板及瓦楞纸箱等类纸板制品的抗压试验机(以下简称"试验机")试验机使用中的周期技术状态检查亦应参照使用。
Board and carton box-Tester of crush resistance
- ICS
- 85.100
- CCS
- N72
- 发布
- 2004-08-15
- 实施
- 2005-01-01
本标准规定了纸和纸板抗强试验机的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于纸和纸板及其它低强度片状材料的抗张强度及伸长率的抗张试验机（以下简称“试验机”）。试验机使用中的周期技术状态检验亦参照使用。
Paper and board-Tester of tensile properties
- ICS
- 85.100
- CCS
- N72
- 发布
- 2004-08-15
- 实施
- 2005-01-01
本标准规定了纸浆打浆度测定仪的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存等基本内容。 本标准适用于造纸生产过程中检验纸浆水悬浮液滤水能力的纸浆打浆度测定仪〈以下简称"打浆仪”〉。打浆仪使用中的技术状态检验亦参照使用。
Pulps-Tester of beating degree
- ICS
- 85.100
- CCS
- N72
- 发布
- 2004-08-15
- 实施
- 2005-01-01
本标准规定了瓦楞纸板输送带的规格、型号、技术要求、检验方法、检验规则、以及产品的标志、包装、运输与储存等。 本标准适用于以聚酯等化学纤维、棉纱及耐高温材料等复合而成的使用与瓦楞纸板生产线的输送带。
Conveyer belt for corrugated cardboard
- ICS
- 85.100
- CCS
- Y91
- 发布
- 2004-01-09
- 实施
- 2004-06-01
本标准规定了热分散机的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于制浆造纸行业在废纸处理流程中对热熔物、油墨进行离解分散的ZDR2-5型单辑式热分散机。
Hot disperser
- ICS
- 85.100
- CCS
- Y91
- 发布
- 2003-12-11
- 实施
- 2004-05-01
本标准规定了内流式网前筛(以下简称网前筛)的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于制浆造纸行业中纸机网前筛选的ZSL72~75型网前筛。
Inflow headbox pressurized screen
- ICS
- 85.100
- CCS
- Y91
- 发布
- 2003-12-11
- 实施
- 2004-05-01
本标准规定了造纸用异形丝干燥网的产品型号与分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于造纸干燥部用的干燥网。
Special-shaped-yarn drier fabric for paper-making
- ICS
- 85.100
- CCS
- Y91
- 发布
- 2003-12-11
- 实施
- 2004-05-01
