87.100 涂料涂覆设备 标准查询与下载

NF T35-008:1986 查询用涂料和清漆型号项目的应用及干燥设施

Installation for the application and drying of paints and varnishes type items for enquiry.

CNS 2308-1983 毛笔刷

本标准适用于竹管及动物毛质制制成，用以扫药、加油、涂刷等用之毛笔刷。

Brushes

GOST 9.010-1980 腐蚀和老化联合防护系统.颜料雾化用压缩空气.操作技术要求和方法

Настоящий стандарт устанавливает технические требования и методы контроля сжатого воздуха, предназначенного для окрашивания пневматиче

Unified system of corrosion and ageing protection. Compressed air for atomization of paint materials. Technical requirements and methods of control

NF B90-004:1978 建筑和工业用油漆刷 尺寸标记 特性

Painting brushes for building and industry - Dimension marking - Characteristics

NF B90-001:1978 金属玫瑰

Viroles métalliques pour brosses à peindre

GOST 23093-1978 油漆涂层干燥装置.型式与基本尺寸

Настоящий стандарт распространяется на конвективные, терморадиационные и терморадиационно-конвективные сушильные установки с подвесны

Drying installations for varnish-and-paint coatings. Types and basic dimensions

CNS 2306-1972 白色卜特兰水泥

本标准适用于白色卜特兰水泥（简称白水泥）。

White Portland Cement

BS 2992:1970 当局机构和公共机关油漆工和装饰工用刷子(填料质量除外)规范

Dimensional requirements in metric system, weight of filling materials (does not specify quality). Covers distemper brushes, wash-down and lime-wash brushes, paint brushes, round and flat fitches and lining tools, glue brushes, sash tools, tar brushes, varnish brushes, paper hangers' smoothing brushes, jamb dusters, flat distemper brushes, stencil brushes, squirrel hair lacquer brushes.

Specification for painters' and decorators' brushes for local authorities and public institutions (excluding quality of fillings)

BS 2808:1969 地方当局用的美术水彩画笔的规范

Covers lining brushes, mops, pencils, retouching brushes, fitches, writing brushes and lacquer brushes for use by local authorities and similar uses where a professional artists' quality brush is not required. Manufacturing requirements, dimensions, materials, identification and marking.

Specification for artists' water-colour brushes for local authorities

FprEN 50176 可燃涂层材料的自动静电应用系统 安全要求

1.1 This document specifies the electrical requirements for the design of automatic electrostatic application systems for liquid coating materials which can be ignited in an atomised state, used within a temperature range from 5 °C to 40 °C. This document considers automatic electrostatic application systems for processing ignitable liquid coating materials, where the conductivity of the complete system is limited up to 50 nS/cm. Together with additional measures like e.g. potential separation systems, these requirements can also be applied to ignitable liquid coating materials, where the conductivity of the complete system is limited up to 2 000 μS/cm. Ignition hazards related to the generated explosive atmosphere and the protection of persons against electric shock are considered. 1.2 This document specifies requirements for interfaces to and additional requirements for machinery according to EN 16985:2018, prEN 12621:2020 and prEN 1953:2020. 1.3 This document also specifies requirements for a safe operation of electrostatic application systems, including the electrical installation. The requirements consider both the processing of coating materials and the cleaning and purge processes. 1.4 This document considers three types of spraying systems; see 5.1. Spraying systems are classified as equipment of group II, category 2G or category 3G. Only electrostatic spraying systems operating with a d.c. sinusoidal ripple of not more than 10 % of the r.m.s. value are considered. 1.5 For electrostatic spraying equipment used in food and pharmaceutical industry, additional requirements could apply. 1.6 This document is not applicable to: — liquid electrostatic application equipment for non ignitable liquid coating material, see EN 50348:2010 ; — electrostatic hand-held spraying equipment, see EN 50050 1:2013, EN 50050 2:2013 and EN 50050 3:2013 as well as prEN 50059:2021; — potential separation systems; — cleaning systems for spraying devices; — selection, installation and application of other electrical and non-electrical equipment in areas with explosion hazard, see EN 60079 14:2014 and EN 16985:2018; — quality assurance systems for electrostatic spraying equipment (see EN ISO/IEC 80079 34:2020, ZB.11). 1.7 This document is not applicable to equipment manufactured before the date of its publication as a European Standard.

Automatic electrostatic application systems for ignitable coating materials - Safety requirements

FprEN 50059 手持式静电喷涂设备 安全要求 不可燃液体涂料用手持式喷涂设备

1.1 This document specifies the requirements for hand-held or hand-operated electrostatic spraying equipment for non-ignitable liquid coating materials which — do not generate an explosive atmosphere inside the spraying area, — are used to process materials with a conductivity of less than 2 000 µS/cm, and — operate with direct current having a sinusoidal ripple of not more than 10 % of the rms value. This document deals with all electrical hazards significant for the electrostatic spraying of non-ignitable liquid coating materials, which could also contain small quantities of added metal particles, if the work is carried out under conditions recommended by the manufacturer. This document specifies the design-related and test requirements for electrostatic spraying equipment of type A-NL according to of EN 50348:2010, Table 1. 1.2 With regard to all other significant hazards relevant for applicators (e.g. ejection of fluids, mechanical strength, electrical (with the exception of electrostatic) hazards, noise, contact with or inhalation of dangerous substances, ergonomics), the requirements of EN 1953 apply. 1.3 This document also gives details regarding quality assurance systems for electrostatic spraying equipment; see Annex D. 1.4 For electrostatic spraying equipment used in food and pharmaceutical industry, additional requirements could apply. 1.5 This document is not applicable to: — electrostatic hand-held spraying equipment for non-ignitable coating materials which are manufactured before the date of its publication, — cleaning of spraying areas, see instruction manual of the spraying booth, — fire prevention and protection (for instance fire hazards due to other sources; see EN 16985), — requirements for machinery for the supply and recirculation of coating material under pressure (see EN 12621). The requirements of EN 12621 apply in terms of specific requirements regarding machinery for the supply and recirculation of coating materials under pressure.

Hand-held electrostatic spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable liquid coating materials

prEN ISO 1514 油漆和清漆 用于测试的标准面板 (ISO/DIS 1514:2023)

ISO 1514:2016 specifies several types of standard panels and describes procedures for their preparation prior to painting. These standard panels are for use in general methods of test for paints, varnishes and related products.

Paints and varnishes - Standard panels for testing (ISO/DIS 1514:2023)

FprEN 12621 液体涂层材料的供应和循环机械 安全要求

This document deals with all significant hazards, hazardous situations and events which are relevant to machinery for supply and circulation of liquid coating material, when used as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse. Together with this document, EN 50050 1:2013, EN 50059:- , EN 50176:- or EN 50348:2010 give requirements for electrostatic machinery for supply and circulation of liquid coating material. The specific significant risks related to the use of machinery for supply and circulation of liquid coating material with foodstuffs and pharmaceutical products are not dealt with in this document. Interfaces to connected machinery and systems are given in Figure 1, to specify the limit of the machinery for supply and circulation of liquid coating material. Figure 1 - Limits of the machinery This document does not apply to: - pressure related hazards of equipment classified as higher than category 1 of Directive 2014/68/EU Article 13; NOTE 1 For equipment of higher category than category 1 of Directive 2014/68/EU, see EN 13445 (all parts) and EN 13480 (all parts) . NOTE 2 See Annex B for guidance on the application of Directive 2014/68/EU. - machinery for the supply of powder coating material; - machinery for coating material recycling; - hand-held agitators; - agitators of more than 3 kW electrical power supply; - offline heating systems; - supply systems for CO2 shot-blasting machinery; - equipment used for manufacturing of coating material; - coating material packaging units (drums, containers, etc.). This document is not applicable to machinery for supply and circulation of liquid coating material manufactured before the date of its publication.

Machinery for supply and circulation of liquid coating materials - Safety requirements

FprEN 1953 涂层材料的应用设备-安全要求

This document deals with all significant hazards, hazardous situations and hazardous events which are relevant to hand-held and automatic application equipment for coating material, when used as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse. Together with this document, EN 50050-1:2013, EN 50050-2:2013, EN 50050-3:2013, EN 50059:-, EN 50176:-, EN 50177:20093, EN 50223:2015 or EN 50348:2010 give requirements for electrostatic application equipment. The specific significant risks related to the use of application equipment with foodstuffs and pharmaceutical products are not dealt with in this document. This document is not applicable to: - application equipment designed for pneumatic working pressure above 15 bar; - application equipment with rotating bell/disc designed for hydraulic working pressures above 25 bar; - non-atomizing application equipment (e. g. extruding equipment, dispenser); - fluidised bed powder coating machinery; - application equipment covered by EN 50580:2012; - supply hoses; - airbrushes for graphic and artistic works; - machinery for the supply and circulation of coating materials (see EN 12621:-). This document is not applicable to application equipment manufactured before the date of its publication.

Application equipment for coating materials - Safety requirements

YB/T 036.19-92 冶金设备制造通用技术条件涂装

General technical conditions for metallurgical equipment manufacturing coating