87.100 涂料涂覆设备 标准查询与下载

KS B 6151-2005 喷枪及杯

이 규격은 압축 공기에 의해 도료를 분무하여 피도장물에 부착시켜서 도장하는 일반 도장용 스

Spray guns & cups

KS B 6151-2005(2020) 喷枪

Spray guns & cups

BS EN 12757-1:2005+A1:2010 涂层材料用搅拌机械.安全性要求.车辆表面整修用的搅料机械

1.1 This European Standard applies to the design and construction of mixing machinery for liquid coating materials equipped with container of maximal volume ≤ 10 l used by vehicle refinishers and their coating materials distributors. The pressure related parts of the machines covered are classified as no higher than category I under article 9 of the Pressure Equipment Directive 97/23/EC. NOTE Pressure related parts of the machines referred to in this European Standard exceeding the limits of category I may lead to additional application of the Pressure Equipment Directive 97/23/EC. This European Standard deals with all significant hazards, hazardous situations and events relevant to mixing machinery mentioned above, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Mixing machinery can operate by stirring or vibrating (shaking) and consists of the following equipment: ? cabinet; ? stirrer; ? vibrator; ? shaker; ? drive unit and related devices; ? container for coating material; ? safety, measuring and control devices; ? lighting; ? heating equipment and/or air conditioning inside the mixing cabinet. The mixing machinery may be fixed or mobile. 1.2 The following is excluded from this European Standard: ? Mixing machinery intended for: ? pressure vessels; ? open or closed material containers larger than 10 l; ? hand-held mixing tools. 1.3 This European Standard is not applicable to mixing machinery which is manufactured before the date of publication of this European Standard by CEN.

Mixing machinery for coating materials. Safety requirements. Part 1: Mixing machinery for use in vehicle refinishing

BS EN 12757-1:2005 涂层材料用搅拌机械.安全要求.车辆表面整修用的搅料机械

1.1 This European Standard applies to the design and construction of mixing machinery for liquid coating materials equipped with container of maximal volume ≤ 10 l used by vehicle refinishers and their coating materials distributors. The pressure related parts of the machines covered are classified as no higher than category I under article 9 of the Pressure Equipment Directive 97/23/EC. NOTE Pressure related parts of the machines referred to in this European Standard exceeding the limits of category I may lead to additional application of the Pressure Equipment Directive 97/23/EC. This European Standard deals with all significant hazards, hazardous situations and events relevant to mixing machinery mentioned above, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Mixing machinery can operate by stirring or vibrating (shaking) and consists of the following equipment: - cabinet; - stirrer; - vibrator; - shaker; - drive unit and related devices; - container for coating material; - safety, measuring and control devices; - lighting; - heating equipment and/or air conditioning inside the mixing cabinet. The mixing machinery may be fixed or mobile. 1.2 The following is excluded from this European Standard: - Mixing machinery intended for: - pressure vessels; - open or closed material containers larger than 10 l; - hand-held mixing tools. 1.3 This European Standard is not applicable to mixing machinery which are manufactured before the date of publication of this European Standard by CEN.

Mixing machinery for coating materials - Safety requirements - Mixing machinery for use in vehicle refinishing

NF T35-011:2005 涂层设备.喷涂有机粉末涂层材料的喷涂室.安全要求

Coating plants - Spray booths for application of organic powder coating material - Safety requirements.

AECMA PREN 4158-2005 航空航天系列.传导层测试电表层阻抗油漆试验方法.P1版

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA-STAN (The European Association of Aerospace Industries - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments.

Aerospace series Paints and varnishes Test method for measurements of electrical surface resistance of conductive layers Edition P 1

DIN EN ISO 9514:2005 色漆和清漆.多组分涂覆系统适用期测定.样品的制备和处理以及试验指南

This document specifies a method, carried out under standard conditions, for preparing and storing a sample of a mulitcomponent coating system and subsequently assessing its pot-life by measuring a particular property/ies.

Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005); German version EN ISO 9514:2005

BS EN 12981:2005+A1:2009 喷镀设备 有机粉状涂料喷镀间 安全性要求

1.1 This European Standard is applicable to spray booths for spray application of organic coating powder, called in this European Standard “powder spray booths”, i.e. machinery and related equipment for automated and/or manual powder coating application processes. This European Standard covers powder spray booths consisting of the following equipment: - forced ventilation system; - air filtering and coating powder recovery system; - coating powder recycling system; - delivery and circulating systems for coating powder (for instance hopper or tank, preparation and transfer new powder feeding); - air conditioning system; - automatic cleaning system; -monitoring and/or control systems; - fire detection and interlocking system; - explosion protection system; - mechanical aspects of product handling systems and reciprocators inside the powder spray booth; - electrical equipment; - powered doors and gates joined together within or at a partially or totally enclosed structure (limited by walls, called space) for the controlled processing of spray application of organic coating powder. This European Standard deals with the significant hazards, hazardous situations and events relevant to powder spray booths when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). NOTE Powder spray booths are classified in Annex !C". In addition, it defines: - the content of marking; - the minimum requirements for use. 1.2 This European Standard does not cover: a) powder spray booths in which the coating is applied by immersion in a fluidised bed; b) powder spray booths for application of non combustible and inorganic coating powder and flock; c) spraying equipment as covered by EN 1953, EN 50050, EN 50177; d) machinery for the supply or circulation of coating material under pressure as covered by prEN 12621; e) all loading and unloading systems; f) automatic systems, e.g. robots as covered by EN 775 and control systems of powder spray booths influencing these systems (e.g. teaching of the spraying process); g) powder spray booths for application of coating powder for food-stuffs and pharmaceuticals; h) spraying areas characterized by an open space for application of organic powder coating material which is limited only by one side wall used for extraction of exhaust ventilation; i) limiting walls of powder spray booths if they are constituent parts of a building. 1.3 This European Standard is not applicable to powder spray booths which are manufactured before the date of publication of this European Standard by CEN.

Coating plants - Spray booths for application of organic powder coating material - Safety requirements

BS EN 12981:2005 涂层设备.喷涂有机粉末涂层材料的喷涂室.安全要求

1 This European Standard is applicable to spray booths for spray application of organic coating powder, called in this European Standard "powder spray booths", i.e. machinery and related equipment for automated and/or manual powder coating application processes. This European Standard covers powder spray booths consisting of the following equipment: — forced ventilation system; — air filtering and coating powder recovery system; — coating powder recycling system; — delivery and circulating systems for coating powder (for instance hopper or tank, preparation and transfer new powder feeding); — air conditioning system; — automatic cleaning system; — monitoring and/or control systems; — fire detection and interlocking system; — explosion protection system; — mechanical aspects of product handling systems and reciprocators inside the powder spray booth; — electrical equipment; — powered doors and gates joined together within or at a partially or totally enclosed structure (limited by walls, called space) for the controlled processing of spray application of organic coating powder. This European Standard deals with the significant hazards, hazardous situations and events relevant to powder spray booths when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). NOTE Powder spray booths are classified in Annex D. In addition, it defines: — the content of marking; — the minimum requirements for use. 2 This European Standard does not cover: a) powder spray booths in which the coating is applied by immersion in a fluidised bed; b) powder spray booths for application of non combustible and inorganic coating powder and flock; c) spraying equipment as covered by EN 1953, EN 50050, EN 50177; d) machinery for the supply or circulation of coating material under pressure as covered by prEN 12621; e) all loading and unloading systems; f) automatic systems, e.g. robots as covered by EN 775 and control systems of powder spray booths influencing these systems (e.g. teaching of the spraying process); g) powder spray booths for application of coating powder for food-stuffs and Pharmaceuticals; h) spraying areas characterized by an open space for application of organic powder coating material which is limited only by one side wall used for extraction of exhaust ventilation; i) limiting walls of powder spray booths if they are constituent parts of a building. 3 This European Standard is not applicable to powder spray booths which are manufactured before the date of publication of this European Standard by CEN.

Coating plants - Spray booths for application of organic powder coating material - Safety requirements

NF T30-101:2005 色漆和清漆.试验用标准样板

Paints and varnishes - Standard panels for testing.

EN 12981:2005 涂层设备.喷涂有机粉末涂层材料的喷涂室.安全要求.包含修改件A1-2009

This European Standard is applicable to spray booths for spray application of organic coating powder, called inThis European Standard "powder spray booths", i. e. machinery and related equipment for automated and/or manual powder coating application processes.This European Standard covers powder spray booths consisting of the following equipment: forced ventilation system; air filtering and coating powder recovery system; coating powder recycling system; delivery and circulating systems for coating powder (for instance hopper or tank, preparation and transfer new powder feeding); air conditioning system; automatic cleaning system; monitoring and/or control systems; fire detection and interlocking system; explosion protection system; mechanical aspects of product handling systems and reciprocators inside the powder spray booth; electrical equipment; powered doors and gates joined together within or at a partially or totally enclosed structure (limited by walls, called space) for the controlled processing of spray application of organic coating powder.This European Standard deals with the significant hazards, hazardous situations and events relevant to powder spray booths when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). NOTE Powder spray booths are classified in Annex C. In addition, it defines: the content of marking; the minimum requirements for use.This European Standard does not cover: a) powder spray booths in which the coating is applied by immersion in a fluidised bed; b) powder spray booths for application of non combustible and inorganic coating powder and flock; c) spraying equipment as covered by EN 1953, EN 50050, EN 50177; d) machinery for the supply or circulation of coating material under pressure as covered by prEN 12621; e) all loading and unloading systems; f) automatic systems, e. g. robots as covered by EN 775 and control systems of powder spray booths influencing these systems (e. g. teaching of the spraying process); g) powder spray booths for application of coating powder for food-stuffs and pharmaceuticals; h) spraying areas characterized by an open space for application of organic powder coating material which is limited only by one side wall used for extraction of exhaust ventilation; i) limiting walls of powder spray booths if they are constituent parts of a building.This European Standard is not applicable to powder spray booths which are manufactured before the date of publication of this European Standard by CEN.

Coating plants - Spray booths for application of organic powder coating material - Safety requirements (Incorporates Amendment A1: 2009)

NF T35-007:2005 涂覆设备.混合室.安全要求

Coating plants - Combined booths - Safety requirements.

DIN EN ISO 1514:2005 色漆和清漆.试验用标准板

Paints and varnishes - Standard panels for testing (ISO 1514:2004); German version EN ISO 1514:2004

BS EN 13355:2004+A1:2009 涂覆设备.组合室.安全性要求

This document is applicable to combined booths for the application of organic liquid coating materials by an operator with maximum drying temperature of 100 °C and deals with all hazards significant for combined booths, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). To the extent of this document, a combined booth is considered an assembly of the following equipment: ⎯ forced ventilation by one or more fans, ⎯ ventilation air heating system (e. g. heat exchanger or burner), ⎯ power driven dampers, forced ventilation ducting, ⎯ dry air filtering and/or wet air washing systems, ⎯ automatic fire extinguishing equipment and additional specific electrical equipment, ⎯ control and power circuits joined together for the spraying and drying process of liquid coating material in a space totally enclosed provided with forced ventilation. ⎯ working pit, in special case. This document does not cover: a) booths for automatic spraying, powder spray booths, open booths, and portable heaters. b) design of the building foundations upon which a booth is installed; c) the civil engineering and building design where a booth is constructed as, or to use part of, a new or existing building; d) spraying equipment (see EN 1953), automatic devices for spraying systems like robots (see EN 775) or reciprocators or similar systems, conveyors, lifts and continuous handling equipment and systems (see EN 619). This document is not applicable to combined booths which are manufactured before the date of publication of this standard by CEN.

Coating plants - Combined booths - Safety requirements

BS EN 13355:2005 涂覆设备.混合室.安全要求

Coating plants - Combined booths - Safety requirements

EN 12757-1:2005 涂层材料用搅拌机械.安全要求.车辆表面整修用的搅料机械.包含修改件A1-2010

This European Standard applies to the design and construction of mixing machinery for liquid coating materials equipped with container of maximal volume 10 l used by vehicle refinishers and their coating materials distributors. The pressure related parts of the machines covered are classified as no higher than category I under article 9 of the Pressure Equipment Directive 97/23/EC. NOTE Pressure related parts of the machines referred to inThis European Standard exceeding the limits of category I may lead to additional application of the Pressure Equipment Directive 97/23/EC.This European Standard deals with all significant hazards, hazardous situations and events relevant to mixing machinery mentioned above, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Mixing machinery can operate by stirring or vibrating (shaking) and consists of the following equipment: cabinet; stirrer; vibrator; shaker; drive unit and related devices; container for coating material; safety, measuring and control devices; lighting; heating equipment and/or air conditioning inside the mixing cabinet. The mixing machinery may be fixed or mobile. The following is excluded fromThis European Standard: Mixing machinery intended for: pressure vessels; open or closed material containers larger than 10 l; hand-held mixing tools.This European Standard is not applicable to mixing machinery which is manufactured before the date of publication of this European Standard by CEN.

Mixing machinery for coating materials Safety requirements Part 1: Mixing machinery for use in vehicle refinishing (Incorporates Amendment A1: 2010)

AECMA PREN 4159-2005 航空航天系列.微生物增长油漆阻止.P1版

Certain fungi are known to be capable of proliferating in fuel systems which can cause corrosion and blockage. Conidiospores are the dispersal form of these fungi. Germination of conidia is the first stage in proliferation of the fungus. If the conidiospore cannot germinate, there can be no proliferation and no blockage of fuel lines, ducts etc.

Aerospace series Paints and varnishes Determination of resistance to microbial growth Edition P 1

AECMA PREN 4195-2005 航空航天系列.油漆涂料试验方法鉻酸盐过滤.P1版

This standard defines a test procedure for the determination of the leaching rate of hexavalent chromium from the dry paint film of a chromate containing primer for aerospace use.

Aerospace series Paints and varnishes Test method for determination of chromate leaching Edition P 1

AECMA PREN 4171-2005 航空航天系列.油漆涂料试验方法磷酸含量测定.P1版

This test standard specifies a method for the titration and determination of the phosphoric acid content of an hydroalcoholic solution for aerospace applications.

Aerospace series Paints and varnishes Test method for determination of phosphoric acid index Edition P 1

BS EN ISO 1514:2004 色漆和清漆.试验用标准样板

This International Standard specifies several types of standard panel and describes procedures for their preparation prior to painting. These standard panels are for use in general methods of test for paints, varnishes and related products. The following types of standard panel are specified: a) steel panels, prepared by  solvent cleaning,  aqueous cleaning,  abrasion,  phosphate treatment,  blast-cleaning (notes for guidance only); b) tinplate panels, prepared by  solvent cleaning,  aqueous cleaning,  abrasion (burnishing); c) zinc-coated panels, prepared by  solvent cleaning,  aqueous cleaning,  abrasion,  chemical treatment; d) aluminium panels, prepared by  solvent cleaning,  aqueous cleaning,  abrasion (burnishing),  chromate conversion coating; e) glass panels, prepared by  solvent cleaning,  detergent cleaning; f) hardboard panels; g) paper-faced plasterboard panels; h) fibre-reinforced cement panels. NOTE Panels made from other materials and by other preparation procedures may be used by agreement, when specified for the product under test.

Paints and varnishes - Standard panels for testing