890 标准查询与下载

DS 472:1992 丹麦工程师协会．风力涡轮机施工的载荷和安全实施规程

Dansk Ingeniorforenings Code of Practice for Loads and Safety of Wind Turbine Constructions

DS/R 470:1990 预防暴力和破坏行为的建议技术措施

Form?let med denne anvisning er at give de planl?ggende og pro-jekterende bedre muligheder for at udforme det fysiske milj? med henblik p? en minimering af omfanget af vold og h?rv?rk. Vold og h?rv?rk har, ud over materielle og menneskelige omkost-ninger, ogs? indirekte f?lger af v?sentlig betydning. Angst og utryghed opst?r og f?rer til ?ndret adf?rd, s? personer i h?jere grad isolerer sig. En selvforst?rkende uheldig udvikling igangs?ttes med det resultat, at byens og boligomr?dernes uderum affolkes. Anvisningen s?ger ogs? at forhindre en s?dan udvikling. Problemer vedr?rende fortolkning af anvisningen henvises til Dansk Ingeni?rforenings permanente normudvalg vedr?rende teknisk fore-byggelse af kriminalitet. Forslag om tilf?jelser, ?ndringer osv vil v?re velkomne og bedes stilet til samme udvalg. Alle ?ndringer, rettelser og fortolkninger bringes i ?vrigt i Dansk Ingeni?rforenings ?Normtill?g", som udkommer én gang om ?ret.

DIF's code for technical preventing of violence and vandalism

DS/INSTA 179:1990 建筑密封剂．表面干燥试验．小玻璃球法

This standard specifies a method for determining the surface-drying characteristics of sealants, which dries by the action of air or by the chemical reaction of its components. The method described may be carried out: Either as a go/no go test, by determining the surface-drying state after a specified time, to assess compliance with a particular requirement, or by determining the surface-drying state at suitable intervals, until the surface drying-time is obtained.

Building sealants. Surface-draying test. Ballotini method

DS/INSTA 178:1990 建筑密封剂．老化体积收缩和质量损失

This standard specifies a method for determining the volume shrinkage, and weight loss after ageing of sealants. The method can be used for all types of sealants.

Building sealants. Volume shrinkage and weight loss after ageing

DS/INSTA 177:1990 建筑密封剂．渗漏．多孔渗水底层的液体损失

This standard specifies a method for determining the amount of liquids in a sealant, which are absorbed by a porous substrate. If too much liquid is absorbed, the properties of the sealant can deteriorate and at the same time there is a risk that the adjacent materials will become stained. The method can be used for all types of sealants containing liquids which can be absorbed by porous substrates.

Building sealants. Seepage. Loss of liquids to porous substrates

DS/INSTA 130:1989 建筑物．测定密封性

This method applies to the determination of the rate of airleakage through the external envelope of a building. resulting from specified air difference. The method is designed to measure the total airleakage through the building elements or envelope surrounding a specific volume (a building or part of a building). The method is not intended for determination of the ventilation rate of a building or volume. at natural pressure conditions. If a part of the envelope of the building or of the chosen part, is not to be included in the measurement. this element must be airtight or the pressure on each side must be equal during the test. If it is not possible to produce positive and negative pressure differences of 55 Pa. e.g. when using existing fans in the building, a simplified procedure in accordance with annex C may be used. The results, however, can not be regarded quite adequate. (Annex C is not part of the standard.)

Buildings. Determination of air tightness

DS/INSTA 131:1989 建筑物．测定室外空气总流入量

Building. Determination of outdoor air inflow

DS/INSTA 172:1989 建筑密封剂．测定抗拉性能NTBUILD004-1988

This standard specifies a laboratory method for the determination of the tensile properties of sealants used in joints in building construction.

Building sealants. Determination of tensile properties

DS/INSTA 173:1989 建筑密封剂．测定硬度NTBUILD005-1988

This standard specifies a laboratory method for the determi-nation of hardness of cured sealants by means of a Shore A durometer. This method is to be used for the measuring of the hardness of sealants which, after curing, become mainly elastic.

Building sealants. Determination of hardness

DS/INSTA 174:1989 建筑密封剂．测定抗脱落性NTBUILD007-1988

This standard specifies a laboratory method for the determi-nation of the adhesion of the sealants to the support when exposed to peeling. The method can only be used for sealants which after curing become mainly elastic.

Building sealants. Determination of resistance to peeling

DS/INSTA 175:1989 建筑密封剂．测定着色和耐碱性

This standard specifies a laboratory method for the determi-nation of staining and whether or not a sealant used with concrete is sufficiently durable to withstand the alkalis in the concrete so that the adhesion to the concrete is not destroyed. The method can be used for all types of sealant used in building constructions.

Building sealants. Determination of resistance to alkalis

DS/INSTA 176:1989 建筑密封剂．测定表层结膜 NTBUILD019-1988

This standard specifies a laboratory method for the determi-nation of skin formation. It is valid for sealants which form skin and are used in building constructions. The method is used only for sealants which contain so much drying oil that a clearly noticed skin surface is formed. The purpose of the method is to determine the thickness of the skin when the sealant is aged, in order to check that only a skin forms on the sealant, but also to check that the sealant itself does not dry completely.

Building sealants. Determination of skin formation

DS/ISO 7390:1989 建筑结构.接缝密封胶.流动阻力的测定

This International Standard specifies a method for the determination of resistance to flow of sealants to be used in joints of vertical surfaces in building construction.

Building construction. Jointing products. Determination of resistance to flow

DS/EN 81-1:1988 电梯和工作电梯.制造与安装的安全规则.第1部分:电梯

Form?let med del 1 af denne standard er at opstille forskrifter for elektrisk drevne elevatorer, som defineret i pkt. 3, hvor stolen er b?ret af tove eller k?der. Specielt bem?rkes, at ogs? elevatorer, der udelukkende anvendes til godstransport, skal anses for elevatorer og ikke sm?-elevatorer for gods, n?r stolens st?rrelse og indretning giver adgang for personer (se pkt. 3, Definitioner).

Safety rules for the construction and installation of lifts and service lifts. Part 1: Electric lifts

DS/INSTA 110:1986 隔热性．建筑物的热成像图

Termografering er en kvalitativ metode til lokalisering af termiske uregelm?ssigheder, inklusive luftt?thed, i bygningers klimask?rm. Standarden specificerer to former for termografering: Pr?vning med IR-kamera benyttes f?rst og fremmest til kontrol af den samlede funktion eller udf?relse af ny- eller ombygning. Forenklet pr?vning med IR-kamera er egnet dels ved unders?-gelser i forbindelse med fx renovering eller ombygningsarbejder dels ved s?kaldt egenkontrol. Principielt adskiller disse to pr?vninger sig ved rapportering og dokumentation af resultaterne. Resultaterne, som opn?s ved termografering, skal bed?mmes og vurderes af personale, der har den n?dvendige ekspertise (se anneks D). Standarden omfatter ikke kvantitativ bestemmelse af konstruktionens varmemodstand og t?thed. Til s?danne bestemmelser kr?ves der supplerende metoder.

Thermal insulation. Thermography of buildings

DS/ISO 7389:1986 建筑结构.连接件.弹性复原的测定

This International Standard specifies a conventional method for the determination of the elastic recovery of sealants after extension and applies to sealants used in joints in building construction.

Building construction. Jointing products. Determination of elastic recovery

DS 1125:1985 乘客电梯装置．第1部分：I，II和III级电梯

Passenger lift installation. Part 1: Lifts of classes I, II and III

DS/ISO 8339:1985 建筑结构.连接件.密封料抗拉性能的测定

This International Standard specifies a method for the determination of the tensile properties of sealants used in joints in building construction. NOTE — A method for the determination of tensile properties at main-tained extension is specified in ISO 8340.

Building construction. Jointing products. Sealants. Determination of tensile properties

DS 1126.7:1985 建筑接缝．接头渗漏性的实验室试验方法

This International Standard specifies the test method to b used in laboratories for assessing the air permeability of nor opening joints in the exterior walls of buildings, whether th joints have been subjected to prior ageing or not.

Joints in building. Laboratory method of test for air permeability of joints

DS/ISO 4190/6:1985 电梯和服务电梯(美国:电梯和小型送货电梯).第6部分:安装在住宅楼内的载客电梯.计划和选用

This part of ISO 4190 lays down rules relating to the planning and selection of lift installations for use in residential buildings, in order to ensure adequate service. It permits, in particular, the number of lifts and their main characteristics to be defined at the very beginning of building design. Three quality levels are specified for the lift service, based on 60 s, 80 s and 100 s intervals at the main floor, and designated as follows: — programme 60; — programme 80; — programme 100. This part of ISO 4190 is applicable to standardized lifts of class I for installation in residential buildings.

Lifts and service lifts (USA: elevators and dumbwaiters). Part 6: Passenger lifts to be installed in residential buildings. Planning and selection