91.040.10 公共建筑物 标准查询与下载

DB11/T 1274-2015 LED广告屏应用技术规范

LED advertising screen application technical specification

DB11/ 1309-2015 社区养老服务设施设计标准

Design Standards for Community Elderly Service Facilities

DB37/T 2732-2015 农村中小学标准化校舍改造建设规范：学校厕所

Standardized school building renovation and construction specifications for rural primary and secondary schools: school toilets

CAN/CSA-Z317.2-2015 医疗机构供暖、通风和空调 (HVAC) 系统的特殊要求

1.1 This Standard provides requirements for the planning, design, construction, commissioning, operation, and maintenance of HVAC systems in HCFs. In general, these requirements are more stringent than those applied to non-health-care facilities. Note: See Annex A for general guidelines on HVAC system design. Table 1 provides specific design parameters for HVAC systems. 1.2 This Standard a) specifies minimum values for certain parameters; b) establishes the suitability of different design options; c) establishes recommendations for zoning, controls, and monitoring; and d) outlines best practice for energy conservation. 1.3 This Standard is not intended to preclude the use of design concepts and the adoption of installation, operations, and maintenance procedures more stringent than those specified in this Standard. In cases where clinical evidence supports additional measures to improve the safety and efficacy of HCFs, such additional measures should be considered in the design, installation commissioning, operation, and maintenance of the HVAC system. 1.4 This Standard applies to new buildings, additions to existing buildings, and alterations to existing buildings. Alterations include changes in function or size of spaces and the rearrangement, replacement, or addition of HVAC equipment, but do not include routine maintenance and service. Note: “Like for like” replacement of worn or failed components is generally considered to be routine maintenance; however, a more in-depth analysis should take place when replacing major components. See Clause 5.8.4. 1.5 This Standard does not address requirements for other elements of a building that are not directly a part of the HVAC system but can affect the design, performance, or operation of these systems, including but not limited to a) building envelope; b) structure; c) electrical power and lighting systems; d) plumbing system; and e) fire protection system. 1.6 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

Special requirements for heating, ventilation, and air-conditioning (HVAC) systems in health care facilities

DB12/T 1132-2022 公共厕所设计规范

Public toilet design specification

DB11/T 1223-2015 大型公共建筑用电分项监测技术规程

Technical specification for sub-item monitoring of electricity consumption in large public buildings

DB11/ 687-2015 公共建筑节能设计标准

Design Standards for Energy Conservation of Public Buildings

DB11/T 1198-2015 公共建筑节能评价标准

Evaluation Standards for Energy Conservation of Public Buildings

DB31/T 862-2014 行政服务中心建设和运行规范

本标准规定了行政服务中心的选址规划、功能区域、设施设备、信息系统、进驻事项、人员配备、管理制度等建设和运行管理要求。 本标准适用于上海市各级政府行政服务中心、管委会行政服务中心的建设及运行管理，部门行政服务窗口等其他提供行政服务的机构可参照执行。

Administrative Service Center Construction and Operation Specifications

DB22/T 2135-2014 循环水生态卫生间

Circulating water ecological toilet

MZ/T 052-2014 自然灾害避灾点管理规范

本标准规定了自然灾害避灾点设置、日常管理以及应急管理的基本要求。本标准适用于各级民政部门对自然灾害避灾点设置、日常管理和应急管理。经城乡规划选定为地震应急避难场所的设计、建设或改造宜参照GB/T 21734。

Specification for management of natural disasters emergency shelter

DB22/T 2091-2014 国境空港口岸检验检疫设施建设规范

Specifications for the construction of inspection and quarantine facilities at frontier airports and ports

DB12/T 514-2014 规划展览馆布展设计通则

本标准规定了规划展览馆布展设计通则的术语和定义、一般要求、布展与建筑、布展程序、布展空间、展览内容、展览形式、展览环境、展览服务设施和防火设计。本标准适用于新建、改建和扩建的规划展览馆布展设计。

General rules for planning exhibition hall layout design

DB11/T 243-2014 户外广告设施技术规范

Technical specifications for outdoor advertising facilities

DB32/T 2615-2014 青奥场馆压力管道安全保障及地理信息 系统（GIS）管理技术服务规范

本标准规定了青奥场馆压力管道安全保障及地理信息系统(GIS)管理技术服务规范的术语和定义、管理要求、日常巡查、维护保养、在线检验、异常情况处置和地理信息系统的基本要求。 本标准适用于青奥场馆的压力管道（以下简称压力管道），其它场所的压力管道可参照执行。

Specifications for Safety Guarantee and Geographic Information System (GIS) Management Technical Services of Pressure Pipelines in Youth Olympic Venues

MZ/T 040-2013 应急期受灾人员集中安置点基本要求

Basic requirements for centralized resettlement sites for disaster victims during the emergency period

DB34/T 1923-2013 医疗建筑智能化系统技术规范

Technical specification for medical building intelligent system

DB44/T 1119-2013 室内装饰感应推拉门

本标准规定了室内装饰感应推拉门的术语和定义、产品分类、要求、试验方法、检验规则和标志、包装、运输与贮存。 本标准适用于室内装饰用铝合金门框的感应推拉门。

Interior decoration sensor sliding door

GSO ISO 2603:2013 同声传译室 一般特征和设备

This International Standard lays down basic specifications to be considered when initial plans are prepared for building or renovating built-in booths for simultaneous interpretation in new or existing buildings. It is applicable to all types of built-in booths with built-in or portable equipment. NOTE 1 Mobile booths for simultaneous interpretation are specified in ISO 4043. In designing new buildings, booths should be optimally integrated into the structure so that the conference room and the booths constitute a well-balanced unit. Design should also provide daylight for the conference hall and booths. The requirements of clauses 4 and 5 apply to booths with built-in equipment, as defined in 3.1, and booths with portable equipment, as defined in 3.2. The dimensional requirements apply equally to semi-permanent booths, as defined in 3.3, for which all other requirements should apply as far as is possible. In addition to structural and design specifications, this International Standard specifies those components of typical conference facilities which form the interpreters working environment. NOTE 2 Clause 12 gives indications concerning the use of public address systems in conjunction with simultaneous interpretation systems.

Booths for simultaneous interpretation -- General characteristics and equipment

GSO ISO 4043:2013 同声传译流动亭一般特点及设备

The basic requirements for booths for simultaneous interpretation are specified in ISO 2603. This International Standard is an adaptation of ISO 2603 to meet the needs of transport and handling of mobile booths to be used in halls not equipped with built-in booths. The main features of mobile booths, distinguishing them from built-in facilities, are that they can be dismantled, moved and set up inside a conference room. Booths that can be moved but are used on the premises and stored near conference rooms are not covered by this International Standard. They should be designed to conform as closely as possible to built-in booths as specified in ISO 2603.

Mobile booths for simultaneous interpretation -- General characteristics and equipment