91.040.10 公共建筑物 标准查询与下载

T/CAMET 02001-2019 绿色城市轨道交通车站评价标准

本标准适用于城市轨道交通车站（含地铁系统、轻轨系统及区域快速轨道系统车站）的绿色评价。 绿色城市轨道交通车站评价应遵循因地制宜的原则，结合所在区域的气候、环境、经济、资源、文化等特点，对车站的场地、交通、能源、水、材料、室内环境等要素进行综合评价。 本标准主要技术内容包括：1 总则；2 术语；3基本规定；4 场地；5交通；6能源；7水；8材料；9站内环境；10运营管理；11技术创新。

Assessment standard for green urban rail transit station

T/CABEE 002-2019 绿色城市轨道交通车站评价标准

《标准》在充分考虑城市轨道交通车站特点及绿色交通建筑今后发展方向的基础上，将评价体系分为场地、交通、能源、水、材料、室内环境、运营七类指标，每类指标包括控制项、评分项。此外，针对创新技术设加分项。标准的主要技术内容为评价指标体系、大类指标权重、具体指标分值以及综合评分方法。

Assessment standard for green urban rail transit station

T/ZS 0050-2019 农村公共厕所改造评价标准

1　范围 2　评价内容　 3　评价级别　 4　评价要求　 4.1　评价方法　 4.2　评价标准　 附录A（资料性附录）　农村公厕改造内容评价表　

Rural public toilet renovation evaluation criteria

T/ZS 0051-2019 农村公共厕所改造与管理规范

1　范围　 2　规范性引用文件　 3　术语和定义　 4　厕所设施　 4.1　平面布置　 4.2　便器设施　 4.3　管理间、工具间　 4.4　外观　 4.5　室内高度　 4.6　材料　 4.7　地面　 4.8　内墙面　 4.9　顶棚　 4.10　厕所间　 4.11　隔板　 4.12　洁具间距　 4.13　清洁池　 4.14　无障碍设施　 4.15　方便配置　 4.16　采光通风　 4.17　防护设施　 4.18　标识标牌　 5　给排水　 5.1　给水　 5.2　化粪池　 5.3　排水　 5.4　室内排水　 5.5　管材及卫生器具　 6　供配电　 6.1　供配电系统　 6.2　照明及控制　 6.3　防雷及接地　 7　管理　 7.1　一般要求　 7.2　人员　 7.3　日常保洁要求 7.4　日常使用和维护要求

Rural public toilet renovation and management norms

T/CECS 609-2019 医院建筑绿色改造技术规程

本规程共分为12章，主要技术内容包括：总则、术语、基本规定、评估与策划、规划与建筑、结构、暖通空调、给水排水、电气与智能化、室内环境质量、施工管理、运行维护。

Technical specification for green retrofitting of hospital building

DB4403/T 23-2019 公共厕所建设规范

本规范适用于深圳市内新建公共厕所的建设；改扩建的公共厕所在具备条件时应按此规范执行。

Specifications for the construction of public toilets

ISO 22259:2019 会议系统.设备.要求

This document specifies requirements for typical conference systems, the parts they are composed of, the auxiliary devices necessary for their use (such as microphones, headphones, and sound reinforcement equipment) and the environment in which they are used. These requirements ensure interoperability and optimum performance under conditions of normal operation. It is applicable to both wired and wireless systems. The environment and areas where events are held are described in Annex A. This document facilitates the determination of the quality of conference systems, the comparison of different systems and the assessment of their proper use by listing their characteristics. This document contains the technical backbone of ISO 20108 and ISO 20109.

Conference systems — Equipment — Requirements

ASTM F1592-12(2019) 滞留空心金属视觉系统的标准试验方法

1.1 These test methods cover fixed detention hollow metal vision systems of various materials and types of construction. These fixed hollow metal vision systems are used in wall openings in detention and correctional institutions designed to incarcerate inmates. 1.2 Frame assemblies investigated under these test methods include individual components including detention security hollow metal frames, frame anchoring, security glazing, panels, and removable glazing stops. 1.3 These test methods are designed to test the capability of a fixed detention hollow metal vision system to prevent, delay, and frustrate escape; to limit or control access to unauthorized or secured areas; and prevent passage of contraband. 1.4 These test methods apply primarily to detention hollow metal vision systems between secure areas generally found inside a detention/correctional facility such as: day rooms, control rooms, cells, and sally ports. These test methods are applicable to vision systems other than hollow metal, provided testing and reporting procedures are followed. 1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Detention Hollow Metal Vision Systems

ASTM F2542-05(2019) 拘留所和教养所通风格栅上人身伤害的标准试验方法

1.1 These test methods cover requirements for simulated service tests and testing equipment for determining the performance characteristics of ventilation grilles used in secure areas, including detention and correctional facilities. The testing equipment provides for the setup and testing of specimen grilles and mounting systems. It is recognized that, in order to meet the intent of these test methods, ventilation grilles must be compatible with the level of performance require by Test Methods F2322. 1.2 It is the intent of these test methods to ensure that security ventilation grilles meet minimum performance levels to control the passage of unauthorized materials into secure areas, to confine inmates, to resist vandalism, and to delay or frustrate escape, or both. It is also the responsibility of the user of these test methods to insure that the grille selected is appropriate, based on relevant regulatory, health, and safety concerns and requirements. Such concerns include, but are not limited to, injury and suicide avoidance. These test methods do not quantify such concerns. 1.3 Take care to provide access to return and exhaust ducts for cleaning as required by NFPA 90A. If access cannot be provided though an interstitial space behind walls or ceiling, the use of filter grilles needs to be considered as an option. When filter grilles are provided, filters shall have a minimum UL-900 class 2 rating, and a filter replacement program needs to be in place at the facility. 1.4 Airflow performance shall be catalogued in accordance with ASHRAE 70–91. Manufacturer’s catalog data must include grade level achieved. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities

ASTM F2322-12(2019) 拘留和教养设施用垂直固定屏障上人身攻击的标准试验方法

1.1 These test methods cover requirements for simulated service tests and testing equipment for determining the performance characteristics of walls designed to incarcerate inmates in detention and correctional institutions. The testing equipment provides for the setup and testing of two sample fixed barriers side-by-side, one with no openings and one equipped with a representative penetration in accordance with the American Correctional Association (ACA) standard for clear view area of 3 ft2 (0.279 m2 ), 12 in. (305 mm) wide by 36 in. (914 mm) high. 1.2 It is the intent of these test methods to help ensure that detention security walls perform at or above minimum acceptable levels to control passage of unauthorized or secure areas, to confine inmates, to delay and frustrate escape attempts, and to resist vandalism. It is recognized that in order to meet the intent of these test methods, opening assemblies within these walls must be compatible with the level of performance required by: Test Methods F1450, F1592, and F1643. 1.3 These test methods apply to walls enclosing or separating secure areas of detention/correctional facilities. 1.4 The values stated in inch-pound units are to be regarded as the standard. The SI values given in parentheses are approximate and for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities

T/CECS 584-2019 绿色养老建筑评价标准

本标准共分11章，主要内容包括：总则、术语、基本规定、节地与室外环境、节能与能源利用、节水与水资源利用、节材与材料资源利用、室内环境质量、施工管理、运营管理和创新项

Assessment Standard for Green Building for the Aged

DB3301/T 0235-2018 城市公共厕所设置标准

本标准规定了城市固定式公共厕所、活动式公共厕所的设置要求。　　 本标准适用于杭州市城镇新建、改建或扩建的公共厕所的设置。原城区内已建公共厕所的提升改造可参照执行。

Urban public toilets set standards

DB3301/T 0231-2018 农村公共厕所建设与管理规范

本标准规定了农村公共厕所的术语和定义、基本规定、厕位和面积、层高及平面布置、室内设施、水电供给及排污、采光、通风、除臭和防虫、标识标牌、组织机构、管理与服务等要求。 本标准适用于新建的农村公共厕所。对现有存量农村公共厕所，可参照本标准改造提升。

Rural public toilet construction and management specifications

DB3302/T 1081-2018 公共厕所保洁与服务规范

Public toilet cleaning and service specifications

DB3301/T 0222-2018 国际化医院建设标准

本标准规定了国际化医院建设的基本要求、组织机构及职责。 本标准适用于各级各类医疗机构的国际化建设。

International Hospital Construction Standards

DB15/T 1420-2018 苏木乡镇便民服务中心建设规范

Construction Specifications of Sumu Township Convenience Service Center

DB31/T 1080-2018 养老机构建筑合理用能指南

本标准规定了本市养老机构建筑合理用能指标的术语和定义、技术要求、统计范围和计算方法及管理要求。 本标准适用于本市养老机构建筑在日常运营中能源利用水平的计算和评价。

Guidelines for Rational Energy Use in Elderly Care Institutions

DB61/T 1118-2017 卫星消防站技术规范

本标准适用于陕西省行政区域内依法依规建立的卫星消防站

Satellite Fire Station Technical Specifications

EN ISO 20108:2017 同声传译. 声音和图像输入的质量和传输. 要求

Simultaneous interpreting - Quality and transmission of sound and image input - Requirements

DB64/T 1518-2017 农村生活污水处理工程技术规程

Rural Domestic Sewage Treatment Engineering Technical Regulations