91.040.30 住宅建筑物 标准查询与下载



共找到 176 条与 住宅建筑物 相关的标准,共 12

Energy-saving design standards for residential buildings

ICS
91.040.30
CCS
P 33
发布
2023-10-07
实施
2024-04-07

Analysis standards for affordable housing project cost index index

ICS
91.040.30
CCS
P 33
发布
2023-10-07
实施
2024-04-07

Anhui Province affordable housing construction standards

ICS
91.040.30
CCS
P 33
发布
2023-10-07
实施
2024-04-07

Prefabricated residential building design regulations

ICS
91.040.30
CCS
P 33
发布
2023-09-30
实施
2023-10-30

本文件规定了乡村居住建筑节能设计的总体要求、建筑布局与节能设计、围护结构保温隔热设计、供暖通风系统设计、照明设计、炊事设计、可再生能源利用。

Energy-saving design code for rural residential buildings

ICS
91.040.30
CCS
E4710
发布
2023-08-31
实施
2023-09-15

Storage-wall system for dwellings

ICS
91.040.30
CCS
发布
2023-08-18
实施

本标准共包括9章,主要技术内容是:总则、术语、基本规定、场地噪声与振动、规划与建筑降噪、室内噪声与振动、空气声隔声、撞击声隔声、制度与管理。

"Quiet Home Evaluation Criteria"

ICS
91.040.30
CCS
E4710
发布
2023-08-15
实施
2023-09-15

Technical Guidelines for Renovation of Old Residential Areas in Wuhan City

ICS
91.040.30
CCS
P01
发布
2023-07-10
实施
2023-08-10

本文件规定了老旧小区改造建设的基本规定、室外环境、房屋建筑、配套基础设施、社区服务设施和小区管理、施工与验收。

Technical Guidelines for reconstruction and construction of old residential areas

ICS
91.040.30
CCS
E4710
发布
2023-06-21
实施
2023-06-30

本文件规定了采暖通风系统节能设计规范的一般规定、热源与热力站、输配系统、采暖(供暖)系统、通风与空气调节系统。 本文件适用于居民建筑中采暖(供暖)通风系统的节能设计。

Code for energy-saving design of heating and ventilation systems

ICS
91.040.30
CCS
E492
发布
2023-06-05
实施
2023-06-20

本文件规定了室内装饰装修验收规范的术语和定义、基本规定、防水工程、卫浴洁具及管道安装工程、电气工程、 抹灰工程、吊顶工程、门窗工程、墙饰面工程、涂饰工程、地面铺装工程、细部工程、工程质量验收及判定。 室内装饰装修验收的实施可参照使用。

Interior decoration and decoration acceptance specification

ICS
91.040.30
CCS
E501
发布
2023-04-25
实施
2023-04-25

本文件规定了养老助残城市社区与家庭病房改造成套的基本原则、总体要求、改造设计、施工安装、验收。

Renovation guide on accessibility of urban community home wards for the elderly and physical disabled people

ICS
91.040.30
CCS
E4710
发布
2023-03-08
实施
2023-03-10

本标准适用于山东省行政区域内城镇新建、改建、扩建住区项目评价。

Smart residential evaluation criteria

ICS
91.040.30
CCS
P07
发布
2023-02-25
实施
2023-04-01

Evaluation Standards for Green Ecological Residential Areas

ICS
91.040.30
CCS
P 04
发布
2023-02-21
实施
2023-05-21

本标准共包括九章,主要技术内容是:在科学研究、技术研发、示范推广的基础上,分别针对竹木建造体系、砖石建造体系、生土建造体系的西南典型民居,综合考虑热环境、光环境、声环境及空气质量等多方面的协同优化,从功能布局、围护结构、设备系统等角度总结适应性、本土化、低成本、集成化的民居物理性能提升技术指南标准。

Technical guidelines for physical performance improvement of typical residential buildings in Southwest China

ICS
91.040.30
CCS
E4710
发布
2023-01-29
实施
2023-03-29

1 Scope 1.1 Application This Standard can be used in the design and construction of new homes, or in alterations to existing housing, as it pertains to accessibility. This includes the design, construction, and alteration of built environments leading up to, into, and throughout accessible dwellings. The requirements in this Standard are suitable for permanent dwellings, short-term dwellings and visitable dwellings. This includes accommodations such as detached houses, semi- detached houses, houses with a secondary suite, duplexes, triplexes, townhouses, row houses and boarding houses, apartments or condominiums, and communal residential dwellings (e.g., hotels/motels, hostels, dormitories, care facilities). Multi-unit residential accommodations with shared common elements outside the dwelling (e.g., shared parking, exterior and interior paths of travel outside of the dwelling, amenity spaces, washrooms located outside of dwellings, etc.) are addressed in CSA/ASC B651. 1.2 Conflicting requirements This Standard does not address the application of technical requirements and recommendations through regulations or conformity assessment schemes. In cases where a requirement or method in another standard that is referenced in a regulation conflict with recommendations in this Standard, the regulatory requirements take precedence. 1.3 Dimensions The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only. This Standard contains minimum requirements based on adult dimensions. Where converted from non-SI units, values have been rounded off with respect to critical dimensions. All dimensions in figures are given in millimetres (mm) and are measured to the centreline, unless otherwise specified. 1.4 Terminology In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements.

Accessible dwellings

ICS
91.040.30
CCS
发布
2023-01-01
实施

Technical regulations for construction and acceptance of capillary network radiant heating and cooling engineering

ICS
91.040.30
CCS
P33
发布
2022-12-30
实施
2023-01-30

为促进村镇装配式住宅的推广及应用,提高广大农村的住宅产业现代化水平,创造宜居的人居环境,特编制本图集。本图集包换建筑、结构、给水排水、电气四方面内容。

Technical specification for Moso bamboo structural building

ICS
91.040.30
CCS
E4710
发布
2022-12-30
实施
2023-02-01

本标准适用于新建、扩建和改建的住宅、集体宿舍等居住建筑的节能设计。

Design Standards for Energy Conservation of Residential Buildings

ICS
91.040.30
CCS
P31
发布
2022-11-24
实施
2023-05-01

本文件适用于山东省超低能耗公共建筑的设计、施工、检测、验收、运行管理和评价。

Technical Standards for Ultra-Low Energy Consumption Public Buildings

ICS
91.040.30
CCS
P31
发布
2022-11-24
实施
2023-02-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号