91.060.30 天花板、地板、楼梯 标准查询与下载

T/AJZCY 002-2023 竹质地板碳储量与碳足迹核算规范

       竹质地板具有竹材利用率高、原料来源广、加工性能好、成本低等优势。竹质地板在生产过程中将竹子吸收的二氧化碳转移存储到最终产品中，并在使用寿命内长期保存，缓解了对气候变化的影响。        本标准从生命周期角度提供了一种竹质地板碳储量和碳足迹的核算方法，从核算的功能单位、系统边界、数据收集和计算方法等方面对核算过程中的细则进行了规范，适用于竹集成地板、竹重组地板、竹展开地板及竹复合地板等多种类型竹质地板的碳储量和碳足迹核算，为企业及相关机构开展竹质地板碳储量与碳足迹核算及评价工作提供明确的指导。          具体技术内容详见标准正文。

Carbon storage and carbon footprint accounting standards for bamboo flooring

T/QGCML 2084-2023 岩棉一体吸音板

本文件规定了岩棉一体吸音板的术语和定义、构成及原理、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于岩棉一体吸音板的生产及检验。

Rock wool integrated sound-absorbing panel

T/CASME 743-2023 地下室长单向板结构设计规范

本文件规定了地下室长单向板结构设计规范的符号和缩略语、基本规定、材料、单向板构造规定、长单向板承载能力极限状态计算及长单向板正常使用极限状态验算等内容。 本文件适用于以钢筋混凝土为主料的地下室长单向板结构。 地下室长单向板结构的设计除应符合本规范外，尚应符合国家现行有关标准的规定。

Code for design of long unidirectional slab structures in basements

T/CASME 744-2023 现浇钢筋混凝土无梁板墙结构设计规范

本文件规定了现浇钢筋混凝土无梁板墙结构设计规范的基本规定、材料、无梁板墙结构构造规定及板墙结构正常使用极限状态验算等内容。 本文件适用于以钢筋混凝土为主料的现浇钢筋混凝土无梁板墙结构。 现浇钢筋混凝土无梁板墙结构的设计除应符合本规范外，尚应符合国家现行有关标准的规定。

Code for design of cast-in-place reinforced concrete beamless slab wall structures

ASTM F3441-23a 弹性地板安装以下 pH 值测量的标准指南

Standard Guide for Measurement of pH Below Resilient Flooring Installations

ASTM E894-23 建筑物用永久金属栏杆系统和栏杆的锚固标准试验方法

1.1 This test method covers procedures to be followed in testing the performance of the anchorage of all types of new and existing permanent metal railing systems (guard, stair, and ramp-rail systems), and rails (hand, grab, and transfer rails) installed in and for agricultural, assembly, commercial, educational, industrial, institutional, recreational, and residential buildings. 1.2 This test method is applicable to railing systems and rails having major structural components made of metal and secondary components made of metal or other materials such as wood, plastics, and glass. 1.3 The test method described can be used to determine whether the anchorage of permanent metal railing systems and rails complies with anticipated performance requirements. 1.4 Specifically, this test method covers procedures for determining the static tension, shear, and moment resistance of anchorages for permanent metal railing systems, and rails in structural elements made of concrete, masonry, wood, and metal as well as related products. 1.5 No consideration is given in this test method to any possible deterioration of anchorage systems, resulting from adverse environmental conditions. The performance of special tests covering this aspect may be desirable. 1.6 Should computations make it possible to provide the needed information, testing may be employed for purposes of verification. 1.7 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 6. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings

T/ESD 2004-2023 防静电接地通用规范

静电敏感电子产品在生产、加工、存储、运输和使用维护过程中为防止静电放电采用接地形式泄放静电荷的联接和要求

General specifications for anti-static grounding

T/ESD 3011-2023 低摩擦起电电压防静电PVC贴面板

低摩擦起电电压防静电PVC贴面板的产品分类、技术要求、检测方法、检验规则、包装、标识、贮存要求

Low friction electrification voltage anti-static PVC veneer

FprEN 17823 建筑构件和建筑物的声学特性 楼梯和楼梯隔离构件的冲击隔音的实验室测量

This document specifies procedures to measure in laboratory the impact sound level reduction of isolated heavy landings connected to a heavy wall, isolated heavy flights of stairs connected to a heavy landing, lower or upper floor, and lightweight stairs connected to a heavy wall, lower or upper floor. This document also considers the characterization of isolating elements for heavy landings or heavy flights of stairs in terms of an insertion loss expressed as an impact sound level difference. The corresponding procedure is given in a normative annex (Annex A), separated from the other procedures for the sake of clarity. The tests are performed in defined test configurations and the test results are firstly restricted to the test configurations as described in the test report. The data can be used for comparing the performance of products and as input for EN ISO 12354-2:2017, Annex F, to calculate the sound pressure levels produced by the same stairs and isolating elements when installed in buildings.

Acoustic properties of building elements and of buildings - Laboratory measurement of the impact sound insulation of stairs and stair isolating elements

ASTM F2195-18(2023) 油毡地砖标准规范

Standard Specification for Linoleum Floor Tile

ASTM E1264-23 吸音天花板产品的标准分类

1.1 This classification covers ceiling products that provide acoustical performance and interior finish in buildings. Products used in performance spaces and other special applications in some cases require more detailed specification than provided by this classification. 1.2 This classification classifies acoustical ceilings by type, pattern, and certain ratings for acoustical performance, light reflectance, and fire safety. It does not cover the aspects of acoustical ceilings when used as a component of a system or assembly tested for fire endurance or floor/ceiling sound transmission. 1.3 This classification does not include physical properties, such as structural hardness, friability, sag, linear expansion and contraction, and transverse strength, which affect the handling, installation, and use of acoustical ceiling products (see Test Methods C367). 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification for Acoustical Ceiling Products

T/SZBX 113-2023 聚酯纤维保温吸声板

本文件规定了聚酯纤维保温吸声板的术语和定义、分类、规格和标记、技术要求、试验方法、检验规则、标志、标签、包装、运输及贮存。

Polyester fiber thermal insulation acoustic board

ASTM F2659-23 使用无损电子湿度计初步评估混凝土、石膏水泥和其他楼板和砂浆层的比较湿度条件的标准指南

1.1 This guide focuses on obtaining the comparative moisture condition within the upper 1.0 in. (25.4 mm) stratum in concrete, gypsum, anhydrite floor slabs and screeds for field tests. Due to the wide variation of material mixtures and additives used in floor slabs and screeds, this methodology may not be appropriate for all applications. See 1.2 through 1.8 and Section 11. Where appropriate or when specified, use further testing as outlined in Test Methods F1869 or F2170 before installing a resilient floor covering. 1.2 This guide is intended for use to determine if there are moisture-related conditions existing on, or in, the floor slabs that could adversely impact the successful application and performance of resilient flooring products. 1.3 This guide may be used to aid in the diagnosis of failures of installed resilient flooring. 1.4 This guide is intended to be used in conjunction with meter manufacturer’s operation instructions and interpretive data where available. 1.5 Where possible or when results need to be quantified, use this guide to determine where additional testing such as Test Methods F1869 or F2170 as specified to characterize the floor slab and the test area environment for moisture, humidity and temperature conditions. 1.6 This guide may not be suitable for areas that have surface applied moisture migration systems, curing compounds or coatings that cannot be removed or cleaned off sufficiently to allow the moisture to move upwards through the slab. For a floor slab of 6 in. (150 mm) plus thickness, low porosity slabs, slabs with no vapor retarder installed, and slabs where the above surface environmental conditions can have a greater than normal influence on the moisture reduction gradient of the floor slab or screed, consider Test Method F2170 (below surface in situ rh method) as a more suitable test method under these circumstances. 1.7 This guide is not intended to provide quantitative results as a basis for acceptance of a floor for installation of moisture sensitive flooring finishes systems. Test Methods F1869 or F2170 provide quantitative information for determining if moisture levels are within specific limits. Results from this guide do not provide vital information when evaluating thick slabs, slabs without effective vapor retarders directly under the slab, lightweight aggregate concrete floors, and slabs with curing compound or sealers on the surface. 1.8 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific warnings are given in Section 7. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter

GSO ASTM E1264:2023 吸音天花板产品的标准分类

  Scope is not provided for this standard

Standard Classification for Acoustical Ceiling Products

ASTM E1155/E1155M-23 测定 FF 地板平整度和 FL 地板水平度数值的标准测试方法

Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers

KS F 4060-2022 水泥粘结人造石地板

Cement bonded artificial stone panel for floor

ASTM F710-22 准备混凝土地板以接收弹性地板的标准实施规程

1.1 This practice covers the determination of the acceptability of a concrete floor for the installation of resilient flooring. 1.2 This practice includes suggestions for the construction of a concrete floor to ensure its acceptability for installation of resilient flooring. 1.3 This practice does not cover the adequacy of the concrete floor to perform its structural requirements. 1.4 This practice covers the necessary preparation of concrete floors prior to the installation of resilient flooring. 1.5 This practice does not supersede in any manner the resilient flooring or adhesive manufacturer’s written instructions. Consult the individual manufacturer for specific recommendations. 1.6 Although carpet tiles, carpet, wood flooring, coatings, films, and paints are not specifically intended to be included in the category of resilient floor coverings, the procedures included in this practice may be useful for preparing concrete floors to receive such finishes. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See 4.1.1, 7.1.1, and 7.1.2 for specific warning statements. 1.8 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring

T/ZZB 2897-2022 浸渍纸玻镁复合地板

本文件规定了浸渍纸玻镁复合地板的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输与贮存以及质量承诺。 本文件适用于以三聚氰胺浸渍耐磨纸、 PVC彩膜、玻镁基材、聚氯乙烯树脂、碳酸钙为主要材料，经压延、热压、涂敷、贴合、成型等工艺制成的地板。

Melamine MGO composite flooring

KS D 7081-2022 建筑天花板用彩色金属

Colour metal for ceiling in building

ASTM E2322-22 在地板和屋顶结构中使用的面板上进行横向和集中载荷试验的标准试验方法

1.1 This test method covers the following procedures for determining the structural properties of segments of floor and roof constructions: Section Test Specimens 5 Loading 6 Deformation Measurements 7 Report 8 Precision and Bias 9 Testing Floors Transverse Load 10 Concentrated Load 11 Testing Roofs Transverse Load 12 Concentrated Load 13 1.2 This test method serves to evaluate the performance of floors and roofs panels subjected to (1) Uniform loading, and (2) Concentrated static loading, which represent conditions sustained in the actual performance of the element. The standard is not intended for the evaluation of individual structural framing or supporting members (floor joist, rafters, and trusses), or both. 1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of the standard. 1.4 This standard is not intended to cover concrete floor slabs. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction