91.060.30 天花板、地板、楼梯 标准查询与下载

DIN EN ISO 16283-2:2020 声学. 建筑和建筑构件隔音的现场测量. 第2部分: 冲击隔音(ISO 16283-2-2020); 德文版 EN ISO 16283-2-2020

This document specifies procedures to determine the impact sound insulation using sound pressure measurements with an impact source operating on a floor or stairs in a building. These procedures are intended for room volumes in the range from 10 m3 to 250 m3 in the frequency rang

Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 16283-2:2020); German version EN ISO 16283-2:2020

UNI 10966-2020 树脂地板和墙面覆盖系统 设计和执行说明

Resinous floor and wall covering systems - Design and execution instructions

DB1310/T 231-2020 天花板隔声性能测定方法

本文件适用于天花板隔声性能测定

Method for measuring ceiling sound insulation performance

EN ISO 16283-2:2020 声学.建筑物及建筑构件中隔声的现场测量.第二部分:撞击声隔音测量（

This document specifies procedures to determine the impact sound insulation using sound pressure measurements with an impact source operating on a floor or stairs in a building. These procedures are intended for room volumes in the range from 10 m3 to 250 m3 in the frequency range from 50 Hz to 5 000 Hz. The test results can be used to quantify, assess and compare the impact sound insulation in unfurnished or furnished rooms where the sound field may or may not approximate to a diffuse field.

Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 16283-2:2020)

ASTM E3118/E3118M-20 用全尺寸动态试验评价吊顶系统抗震性能的标准试验方法

Standard Test Methods to Evaluate Seismic Performance of Suspended Ceiling Systems by Full-Scale Dynamic Testing

ISO 16283-2:2020 声学 - 建筑物和建筑构件隔音的现场测量 - 第2部分:影响隔音

This document specifies procedures to determine the impact sound insulation using sound pressure measurements with an impact source operating on a floor or stairs in a building. These procedures are intended for room volumes in the range from 10 m3 to 250 m3 in the frequency range from 50 Hz to 5000 Hz. The test results can be used to quantify, assess and compare the impact sound insulation in unfurnished or furnished rooms where the sound field may or may not approximate to a diffuse field.

Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation

ASTM E1155-20 测定地板平整度和地板水平度数值的标准试验方法

1.1 This test method covers a quantitative method of measuring floor surface profiles to obtain estimates of the floor’s characteristic FF Flatness and FL Levelness Face Floor Profile Numbers (F-Numbers) using the inch-pound system of units. NOTE 1—A complete metric companion to Test Method E1155 has been developed, Test Method E1155M; therefore, no metric equivalents are shown in this test method. 1.2 The text of this test method references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this test method. 1.3 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers

T/JSTJXH 004-2020 内置球体现浇混凝土空心楼盖技术规程

        为适应工业与民用建筑多功能、多用途、厚板的需要，新型空心楼板技术不断发展、完善，其中内置球体空心楼板因具有高强、减材、节能、隔声等优点显得尤为突出，但在应用中无标准指导使用，对设计、球体制造、工程施工、质量验收带来不便，因此亟需编制相应的工程技术规程。针对建筑市场对内置球体空心楼板技术的需求，编制组开展了广泛深入的调查研究，组织了相关单位，共同编制了本技术规程。

Technical Specification for Cast-in-situ Concrete Hollow Floor Structure with Built-in Balls

T/ZZB 1666-2020 半硬质聚氯乙烯复合块状地板

本标准规定了半硬质聚氯乙烯复合块状地板（以下简称地板）的术语和定义、产品分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输与贮存以及质量承诺。 本标准适用于以聚氯乙烯树脂为主要原材料，通过热压工艺制备的室内用地板。

Semirigid polyvinyl chloride engineered floor tiles

T/CECS 706-2020 再生集料楼板隔声保温系统应用技术规程

主要技术内容包括：总则、术语、系统及组成材料、设计、施工、质量验收。

Technical specification for application of floor slab sound and thermal insulation system of recycled aggregate

ASTM F2199-20 热暴露后测定弹性地板尺寸稳定性和卷曲性能的标准试验方法

1.1 This test method covers the determination of the change in linear dimensions of resilient floor tile/plank products after exposure to heat and reconditioning to ambient temperature. 1.2 This test method allows one to also measure curling that can occur after a specimen has been exposed to heat and reconditioned back to ambient temperature. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat

KS D 7081-2020 色金属天花板建筑

Colour metal for ceiling in building

ASTM F2169-15(2020) 弹性楼梯踏板的标准规范

1.1 This specification covers resilient treads made of rubber and vinyl for interior use. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Resilient Stair Treads

SJ/T 11236-2020 防静电贴面板通用技术规范

General technical specifications for anti-static veneer panels

ASTM E580/E580M-20 在地震地面运动区域内安装用于声瓦和放置面板的天花板悬挂系统的标准做法

Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions

KS F 4726-2019 地板用预制混凝土板的标准规范

Standard specification for precast concrete panel for floor

T/ZZB 1413-2019 硬质聚氯乙烯石塑地板

本标准规定了硬质聚氯乙烯石塑地板的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输与贮存及质量承诺。 本标准适用于以聚氯乙烯树脂、碳酸钙为主要原料制成的室内用地板。

Stone plastic composite flooring

ASTM C1732-19 混凝土地砖安装标准实践

1.1 This practice covers the installation of concrete floor tile (CFT) units for application as exterior and interior flooring. Units described by this practice shall be manufactured to meet the requirements of Specification C1731. This practice is limited to the installation of CFT units. 1.2 This practice covers aspects of installation relating to performance in service. 1.3 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Installation of Concrete Floor Tiles

ASTM E1264-19 隔音天花板产品的标准分类

Standard Classification for Acoustical Ceiling Products

T/CBCA 003-2019 浮筑楼板保温隔声系统应用技术规程

本规程的主要技术内容：1.总则；2术语；3.性能要求；4.设计；5.施工；6.验收。

Technical specification for thermal and sound insulation system of floating floor