91.090 外围建筑物 标准查询与下载

NF C73-895:2002 家用和类似电器的安全性.第2-95部分:住宅用垂直移动车库门驱动装置的特殊要求

Safety of household and similar electrical appliances - Part 2-95 : particular requirements for drives for vertically moving garage doors for residential use.

AS 2423:2002 给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管

Specifies requirements and sets out options, for zinc or zinc/aluminium-alloy coated steel wire and wire products for a broad range of fences, trellises, enclosures and the like. Terrestrial, aquatic (notably marine) and general uses are covered. The Sta

Coated steel wire fencing products for terrestrial, aquatic and general use

BS 1722-14:2001 栅栏.开放筛网钢片栅栏规范

This part of BS 1722 specifies requirements for the following categories of open mesh steel panel fences: a) category 1: general purpose fences up to 2 400 mm high; b) category 2: security fences at least 2 400 mm high; c) category 3: high security fences at least 3 000 mm high; d) category 4: extra high security fences at least 3 000 mm high. Requirements for the performance of panel fences for this standard are based upon loadings described in clause 5. Maintenance of the fence after installation is outside the scope of the standard. NOTE Annex A list items that should be agreed between the fence supplier and the purchaser.

Fences - Specification for open mesh steel panel fences

BS 5709:2001 通道、大门和旋转栅门.规范

This British Standard specifies field-measurable performance requirements for gaps, gates and stiles for footpaths and bridleways. It provides a hierarchy of performance requirements to enable choices to be made as to which type of structure is most appropriate in given circumstances. This British Standard does not apply to stiles with moving parts.

Gaps, gates and stiles - Specification

ASTM F537-01 木栅栏和相关材料的设计、制造和安装的标准规范

1.1 This specification covers all wood fences, including fences combined with wood and other materials. 1.2 This specification covers three classifications of wood fences. This specification is based on fundamental construction principles combined with long-standing traditional fence building skills, and covers the design, fabrication, and installation practices of wood fences. 1.3 This specification also provides a systematic method of purchase, inspection with basis for rejection, and certification of manufactured wood fences by the fence industry. 1.4 The values stated in inch-pound units are to be regarded as the standard. Acceptable industry-wide SI equivalents are being developed.

Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials

DS/EN 12453:2001 工业、商业和车库门和大门 使用电动门的安全 要求

This standard specifies the performance requirements in regard of the safety in use for any type of power operated doors, gates and barriers intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.

Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements

DS/EN 12445:2001 工业、商业和车库门和大门 电动门的使用安全 测试方法

This standard specifies the test methods to be applied to a power operated door to demonstrate compliance with the requirements specified in EN 12453:2000. In particular it specifies the method of measuring the forces developed by a power operated door. It applies to any power operated door covered by EN 12453:2000.

Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods

DS/EN 12444:2001 工业、商业和车库门和大门 抗风荷载 测试和计算

This European Standard specifies the test method and/or calculation of resistance to wind load for doors in a closed position. The doors are intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13241:1998.

Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation

ASTM F537-01(2014) 由木材和相关材料构成的栅栏的设计, 制造和安装的标准规格

1.1 This specification covers all wood fences, including fences combined with wood and other materials. 1.2 This specification covers three classifications of wood fences. This specification is based on fundamental construction principles combined with long-standing traditional fence building skills, and covers the design, fabrication, and installation practices of wood fences. 1.3 This specification also provides a systematic method of purchase, inspection with basis for rejection, and certification of manufactured wood fences by the fence industry. 1.4 The values stated in inch-pound units are to be regarded as the standard. Acceptable industry-wide SI equivalents are being developed.

Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials

DS/EN 12604:2000 工业、商业和车库门和大门 机械方面 要求

This European Standard specifies the mechanical requirements for doors, gates and barriers intended for installation in areas in the reach of people and for which the main intended uses are giving safe access for goods and vehicles accompanied by persons in industrial, commercial and residential premises. These products may be manually or power operated.

Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements

DS/EN 12424:2000 工业、商业和车库门和大门 抗风载荷 分类

This European Standard specifies the classification for wind load for doors in a closed position. The doors are intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13241:1998.

Industrial, commercial and garage doors and gates - Resistance to wind load - Classification

DS/EN 12425:2000 工业、商业和车库门和大门 防水渗透 分类

This European Standard specifies the classification for resistance to water penetration for doors in a closed position, when tested in accordance with EN 12489:2000. The doors are intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13241:1998.

Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification

DS/EN 12426:2000 工业、商业和车库门和大门 透气性 分类

This European Standard specifies the classification for air permeability for doors in a closed position, when tested in accordance with prEN 12427:2000. The doors are intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13241:1998.

Industrial, commercial and garage doors and gates - Air permeability - Classification

DS/EN 12427:2000 工业、商业和车库门和大门 透气性 测试方法

This European Standard specifies a test method for determining the air permeability for doors in a closed position. The doors are intended for installation in areas in the reach of people, for which the main intended uses are given safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13241:1998

Industrial, commercial and garage doors and gates - Air permeability - Test method

DS/EN 12489:2000 工业、商业和车库门和大门 防水渗透性 试验方法

This European Standard specifies the test method for determining the resistance to water penetration for doors in a closed position. The doors are intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13241:1998.

Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method

DS/EN 12605:2000 工业、商业和车库门和大门 机械方面 测试方法

This European Standard specifies the test methods to verify the mechanical requirements for doors, gates and barriers intended for installation in areas in the reach of people and for which the main intended uses are giving safe access for goods and vehicles accompanied by persons in industrial, commercial and residential premises.

Industrial, commercial and garage doors and gates - Mechanical aspects - Test Methods

BS 1722-9:2000 栅栏.带圆形或方形竖杆和扁平横杆的低碳钢栅栏规范

This part of BS 1722 specifies requirements for self-adjusting (nibbed) or welded mild steel (low carbon steel) fences with round or square verticals and rolled hollow section (RHS) or rolled steel joist (RSJ) posts and flat horizontals. It also specifies requirements for their installation. Maintenance of the fence after installation is outside the scope of this standard.

Fences - Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals

KT 22-2000 栅栏

Fences

BS 1722-2:2000 栅栏.应变金属丝和金属丝网栅栏规范

This part of BS 1722 specifies requirements for the construction and installation of general pattern and dropper pattern strained wire fences and rectangular wire mesh fences, including mild steel or high tensile woven wire fencing, welded mesh fencing, hexagonal wire netting fences of the general pattern, and spring steel wire pattern fences where the mesh is fixed onto spring steel line wires. NOTE Figure 1 illustrates the general characteristics of strained wire fences. It is not intended to illustrate any particular requirements of this standard but provides guidance as to the general layout of a typical fence, and on the terminology associated with this form of fencing.

Fences - Specification for strained wire and wire mesh netting fences

DB37/ 268-1999 霓虹灯安装规范

本标准规定了霓虹灯管、霓虹灯变压器、霓虹灯控制器、导线、避雷装置、霓虹灯招牌以及导线贯穿板壁等安装要求，适用于各类室内、外霓虹灯安装工程。

Neon Light Installation Specifications