91.100 建筑材料 标准查询与下载

KS F 9005-2003 轻型钢结构梁非承重墙施工标准

이 규격은 경량 형강 부재를 사용하여 건축물의 비내력 벽체를 구성하는 시공 방법에 대하

Non-bearing wall construction work of light-gauge steel framing members

KS F 9005-2003(2018) 的轻量钢筋骨架框架构件非承重墙施工工作

Non-bearing wall construction work of light-gauge steel framing members

CAN/CSA-S806-2002(C2007) 含有纤维增强聚合物的部件的计算和构造规则

1 Domaine d'application 1.1 Généralités Cette norme énonce les exigences relatives au calcul et à l'évaluation des composants en polymère renforcé de fibres (PRF) utilisés dans la construction et des composants armés ou renforcés avec des matériaux PRF. Elle est basée sur les principes de calcul aux états limites et est conforme au Code national du bâtiment du Canada. Cette norme ne s'applique pas au calcul du béton armé avec des fibres (BRF) sauf pour ce qui est des parements BRF/PRF tel que défini à l.article 7.3 et au chapitre 13. Note : Les modes opératoires, les méthodes d'essai et les spécifications se trouvent dans les annexes A à T. 1.2 Composants PRF Les exigences visant la détermination des caractéristiques techniques et le calcul des composants PRF autoporteurs font l'objet de cette norme. 1.3 Composants renforcés avec des PRF Les exigences visant la détermination des caractéristiques techniques et le calcul des composants armés ou renforcés avec des fibres font l'objet de cette norme. Les composants armés ou renforcés avec des fibres visés par cette norme comprennent, entre autres, les barres, les câbles, les matelas, les treillis, les boudinages, les feuilles et les laminés. 1.4 Effets d.une exposition aux flammes et à des températures élevées Cette norme exige que le concepteur prenne en considération les effets d.une exposition aux flammes et à des températures élevées sur le comportement des composants PRF et des composants renforcés avec des PRF.

Rules for calculation and construction of components containing fiber-reinforced polymers

BS EN 13703:2003 辅助设施的防火试验.架高通道和空心地板

Identical with IP 515/2004.

Methods of test for petroleum and its products - BS 2000-515:Bitumen and bituminous binders - Determination of deformation energy

GSO 1447:2002 粘土屋顶瓦及其瓦片连接

N/A

Pitched roofs clay tiles and fittings

GSO 1446:2002 天然花岗岩的测试方法

.

Methods of test for natural granite

GSO 1448:2002 粘土斜屋顶瓦的测试方法

N/A

Methods of test for pitched roofs clay tiles

GSA FED-STD-832-2002 穹顶的施工方法和材料

Thisdocment establishes minimmconstmction requirements forhighsecmity vaults for storage of classified information and weapons.

CONSTRUCTION METHODS AND MATERIALS FOR VAULTS

ARMY MIL-HDBK-669 VALID NOTICE 1-2002 装卸台非法操纵的空降材料的装载环境和相关要求

MIL-HDBK-669, dated 3 February1997, has been reviewed and determined to be valid for use in acquisition.

LOADING ENVIRONMENT AND RELATED REQUIREMENTS FOR PLATFORM RIGGED AIRDROP MATERIAL

ARMY MIL-STD-814 D VALID NOTICE 1-2002 拴紧.检测和提取条款空降军用材料的要求

MIL-STD-814D, dated 3 February1997, has been reviewed and determined to be valid for use in acquisition.

REQUIREMENTS FOR TIEDOWN, SUSPENSION AND EXTRACTION PROVISIONS ON MILITARY MATERIAL FOR AIRDROP

CAN/CSA-S806-2002(R2007) 纤维增强聚合物建筑构件的设计和施工

1 Scope 1.1 General This Standard provides requirements for the design and evaluation of building components of fibre-reinforced polymers (FRP) in buildings and of building components reinforced with FRP materials. It is based on limit states design principles and is consistent with the National Building Code of Canada. This Standard does not apply to the design of fibre-reinforced concrete (FRC), except for FRC/FRP cladding as defined in Clause 7.3 and Clause 13. Note: Procedures, test methods, and specifications are provided in Annexes A to T. 1.2 FRP Components Requirements for the determination of engineering properties and design of self-supporting FRP components are covered by this Standard. 1.3 FRP Reinforced Components Requirements for the determination of engineering properties and design of FRP reinforced building components are covered by this Standard. The FRP reinforcing elements covered include bars, tendons, mats, grids, roving, sheets, and laminates. 1.4 Exposure to Fire and Temperature Effects This Standard requires the designer to consider the possible effects of exposure to fire or elevated temperatures on the performance of FRP components and FRP reinforced components.

Design and Construction of Building Components with Fibre-Reinforced Polymers

SNI 03-6771-2002 建筑材料可燃性检测方法

Test methods for ignitability of building materials

JC/T 876-2001 煅烧α-氧化铝

Calcinated α-alumina

JC/T 409-2001 硅酸盐建筑制品用粉煤灰

Fly ash for silicate building products

CNS 13265-2000 挤出成形水泥复合材中空板

本标准适用于建筑物非承重墙板用之挤出成形水泥复合材中空板（以下简称中空板）。备考：本标准中｛ ｝内之单位系公制，其数值为近似值。

Extruded Cement Composite Hollow Panel

JC/T 868-2000 金属面硬质聚氨酯夹芯板

Metal skinned rigid polyurethane foam sandwich panels

WB/T 1013-2000 玻镁复合保温屋面板

Glass fiber reinforced and magnesium oxy-chloride gelatinous materials composite heat-shielded roof plate

JC/T 779-2000 玻璃纤维增强塑料浴缸

Glass fiber reinforced plastics baths

DLA L-P-390 C NOTICE 2-2000 (低中号和高密度)聚乙烯和无规共聚物的成型和提取材料塑料 参考ASTM D 4976,ASTM D 4976 REV A,ASTM D 4976,ASTM D 4976,ASTM D 4976,ASTM D 4976 REV B,ASTM D 4976 REV A,ASTM D 4976,ASTM D 4976,ASTM

L-P-390C, dated 10 August 1971, is inactivated for new design and is no longer used, except for replacement purposes. Future acquisition for this product, when used in new design, should refer to ASTM D 4976, "STANDARD SPECIFICATION FOR POLYETHYLENE PLASTICS MOLDING AND EXTRUSION MATERIALS".

PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY) [Refer To: ASTM D4976, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, ASTM D4976 REV B, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, AS

JC/T 855-1999 蒸压加气混凝土板钢筋涂层防锈性能试验方法

Test method of anti-corrosion performance for the coated reinforcement in autoclaved aerated concrete slabs