91.120.01 建筑物的防护综合 标准查询与下载

DB62/T 4677-2023 土遗址裂隙灌浆加固技术设计规范

Specifications for technical design of fissure grouting reinforcement in earthen ruins

DB62/T 4678-2023 土遗址锚固及质量检验技术规程

Technical specification for anchoring and quality inspection of earthen ruins

T/ZS 0400-2022 水利水电工程先张法预应力混凝土H型护岸桩施工规范

前言　 1 范围　 2 规范性引用文件　 3 术语和定义　 4 基本要求　 5 施工准备　 6 施工过程　 6.1 一般规定　 6.2 沉桩施工　 6.3 信息化管理　 7 安全与环保　 7.1 一般规定　 7.2 施工安全　 7.3 环境保护　 8 检验与验收　 8.1 一般规定　 8.2 质量检验　 8.3 验收　 附录A（资料性）施工监测记录表　 附录B（资料性）施工安全检查表　 附录C（资料性）施工质量验收表　 附录D（资料性）安放记录表　 附录E（资料性）重要隐蔽（关键部位）单元工程质量等级签证表　 附录F（资料性）板桩施打重要隐蔽单元工程施工质量（联合）检查表　

Code for construction of pre-tensioned prestressed concrete H-type revetment piles for water conservancy and hydropower projects

DB3301/T 0379-2022 历史建筑保护利用导则编制规范

本文件规定了历史建筑保护利用导则（以下简称“导则”）编制的基本原则和框架要求、编制流程、编制内容和文本格式。 本文件适用于历史建筑保护利用导则的编制。

Guidelines for the Preservation and Utilization of Historic Buildings

T/CECS 1134-2022 钢结构防火涂层鉴定与维护标准

本标准共分6章和3个附录，主要技术内容包括：总则、术语、基本规定、现场调查、鉴定和维护等。

Standards for appraisal and maintenance of fireproof coatings for steel structures

ASTM E2131-16(2022) 处理和报告有形财产损失的标准实施规程

1.1 This practice focuses on addressing and reporting losses of tangible property. 1.2 Loss occurrences are key aspects of risk management. Projecting the possibility or probability of losses, discovering, disclosing, reporting, managing, and minimizing losses to a reasonable extent is a critical economic factor in the success of the owning or holding entity. This practice also establishes acceptable levels of losses. 1.3 Losses are often discovered as a result of an occurrence, a physical inventory, property custodian or entity selfassessment, or external audit. An actual loss occurrence can be at any time during the property life cycle. 1.4 Assessing and determining financial liability for losses is not addressed in this practice; such assessments are generally subject to individual contracts or other arrangements. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Addressing and Reporting Losses of Tangible Property

T/SDECA 5082-2022 RZGH 无机复合保温板外墙防火保 温系统建筑构造

主要技术内容包括：总则、术语、基本规定、体系构造和要求、设计、施工和验收等内容，系统地对RZGH 无机复合保温板外墙防火保温系统做了具体的技术要求和规定。同时为进一步对该技术体系的设计提出规范和指导，有针对性地对设计详图和设计构造等作出明确的热工计算和设计要求。

RZGH Inorganic Composite Insulation Board Exterior Wall Fire Protection and Insulation System Building Structure

DB34/T 4250-2022 民用建筑绿色设计标准

Green Design Standards for Civil Buildings

GSO ASTM F1637:2022 安全行走表面的标准实践

1.1 This practice covers design and construction guidelines and minimum maintenance criteria for new and existing buildings and structures. This practice is intended to provide reasonably safe walking surfaces for pedestrians wearing ordinary footwear. These guidelines may not be adequate for those with certain mobility impairments. 1.2 Conformance with this practice will not alleviate all hazards; however, conformance will reduce certain pedestrian risks. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Safe Walking Surfaces

ASTM E2252-22 住宅或儿童居住设施中已识别风险的铅危害降低方法选择的标准实施规程

1.1 This practice describes the selection of lead hazard reduction methods for controlling lead hazard risks identified during risk assessments of residential dwellings and child occupied facilities. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.3 This practice contains notes, which are explanatory and are not part of the mandatory requirements of this standard. 1.4 Methods described in this practice may not meet or be allowed by requirements or regulations established by local authorities having jurisdiction. It is the responsibility of the user of this standard to comply with all such requirements and regulations. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities

DB37/T 4395-2021 学生校外活动场所防火安全技术标准

Fire Safety Technical Standards for Students' Off-campus Activity Places

DB32/T 4107-2021 民用建筑节能工程热工性能现场检测标准

本标准适用于我省新建、扩建、改建的民用建筑节能工程围护结构现场热工性能的检测。既有建筑节能改造工程的检测可参照执行。

On-site testing standard for thermal performance of civil building energy-saving engineering

T/SXWIIA 001-2021 渗透结晶型材料防水系统应用技术标准

本标准共分6章、1个附录和条文说明，主要内容包括：总则、术语、系统材料、系统设计、系统施工、系统验收。

Technical standard for application of capillary crystalline waterproofing system

T/CECS 898-2021 近零能耗建筑外墙保温工程技术规程

主要技术内容包括：总则、术语、基本规定、性能、设计、施工、工程验收等。

Technical specification for near-zero energy building exterior wall insulation engineering

T/TBMA 006-2021 高延性混凝土加固农村住房应用技术导则

本导则适用于天津市高延性混凝土加固单层农村住房砖砌体结构承重墙体的设计、施工、质量检验和验收。

Technical Guidelines for the Application of High Ductility Concrete to Strengthen Rural Housing

T/CECS 863-2021 既有幕墙维护维修技术规程

主要技术内容包括：1.总则；2.术语；3.材料；4.通用规定；5.玻璃幕墙；6.金属与石材幕墙；7.人造板材幕墙；8.雨篷、外门和室外装饰构件；9.施工与验收；10.清洗等。

Technical regulations for maintenance and repair of existing curtain walls

BSI Flex 8670 v3.0-2021-04 建设环境 在能力框架中建立安全的核心标准 实务守则

Built environment. Core criteria for building safety in competence frameworks. Code of practice

T/CECS 837-2021 建筑孔洞自动防火封堵装置应用技术规程

主要技术内容包括：总则、术语、基本规定、设计、安装、验收、维护保养和报废等

Technical specification for application of automatic fire prevention and sealing device for building openings

T/CECS 807-2021 建筑木结构用防火涂料及阻燃处理剂应用技术规程

主要技术内容包括：总则、术语、材料、设计、施工、验收、涂层维护与保养等。

Technical specification for the application of fire retardant coatings and fire retardant treatment agents for building wood structures

T/CECS 755-2020 烟草生产建筑设计防火规程

主要技术内容包括：总则，术语，火灾危险性类别和建筑耐火等级，消防救援平面布局及救援设施，露天烟叶堆场，烟草仓库，烟草生产厂房，防排烟、供暖及通风空调，消防给水和灭火设施，消防电气和消防设施物联。

Specification for fire protection design of tobacco production buildings